Back to Contents Page
 Supported Features
Dell OpenManage Server Administrator Storage Management User's Guide
Supported Features on the PERC 4/SC, 4/DC, 4/Di, 4e/Si, 4e/Di, 4e/DC, and 4/IM Controllers
Supported Features on the CERC SATA1.5/2s and CERC SATA1.5/6ch Controllers
Supported Features on the PERC 5/E, PERC 5/i, PERC 6/E, PERC 6/I, PERC 6/I Modular, and CERC 6/I Controllers
Supported Features on the PERC H800, PERC H700 Adapter, PERC H700 Integrated, and PERC H700 Modular Controllers
Supported Features on the SAS 5/iR, SAS 6/iR, and PERC H200 Controllers
Supported Features on the PERC S100 and S300 Controllers
Supported Features on the Non-RAID Controllers
Enclosure and Backplane Features
Enclosure and Backplane Support for Smart Thermal Shutdown
Maximum Supported Configuration
Different controllers support different features. The tasks displayed by the Storage Management menus and other features vary depending on whether the
controller supports the feature. This appendix identifies the features that each controller supports. For more information, see your hardware documentation.
Supported Features on the PERC 4/SC, 4/DC, 4/Di, 4e/Si, 4e/Di, 4e/DC, and 4/IM
Controllers
This section identifies the controller-supported features and whether or not an enclosure can be attached to the controller.
l Controller Tasks
l Battery Tasks
l Connector Tasks
l Physical Disk Tasks
l Virtual Disk Tasks
l Virtual Disk Specifications
l Supported RAID Levels
l Read, Write, and Disk Cache Policy
l Enclosure Support
For enclosure-supported tasks, see Enclosure and Backplane Features.

Controller Tasks
Table 1-1.ControllerTasksSupportedbythePERC4/SC,4/DC,4/Di,4e/Si,4e/Di,4e/DC,and4/IMControllers