Chauvet OVATION User manual

OVATION
Chauvet
Brand
Chauvet
Model
OVATION
Category
Stroboscopes & disco lights
Type
User manual

This manual is also suitable for

User Manual
Ovation E-930VW User Manual Rev. 4
Edition Notes
The Ovation E-930VW User Manual includes a description, safety precautions, installation, programming,
operation and maintenance instructions for the Ovation E-930VW.
Trademarks
CHAUVET, the Chauvet logo and Ovation E-930VW are registered trademarks or trademarks of Chauvet
& Sons, LLC (d/b/a Chauvet and Chauvet Lighting) in the United States and other countries. Other
company and product names and logos referred to herein may be trademarks of their respective
companies.
Copyright Notice
The works of authorship contained in this manual, including, but not limited to, all design, text and images
are owned by Chauvet.
© Copyright 2019 Chauvet & Sons, LLC. All rights reserved.
Electronically published by Chauvet in the United States of America.
Manual Use
Chauvet authorizes its customers to download and print this manual for professional information purposes
only. Chauvet expressly prohibits the usage, copy, storage, distribution, modification, or printing of this
manual or its content for any other purpose without written consent from Chauvet.
Document Printing
For best results, print this document in color, on letter size paper (8.5 x 11 in), double-sided. If using A4
paper (210 x 297 mm), configure the printer to scale the content accordingly.
Intended Audience
Any person installing, operating, and/or maintaining this product should completely read through the guide
that shipped with the product, as well as this manual, before installing, operating, or maintaining this
product.
Disclaimer
Chauvet believes that the information contained in this manual is accurate in all respects. However,
Chauvet assumes no responsibility and specifically disclaims any and all liability to any party for any loss,
damage or disruption caused by any errors or omissions in this document, whether such errors or
omissions result from negligence, accident or any other cause. Chauvet reserves the right to revise the
content of this document without any obligation to notify any person or company of such revision, however,
Chauvet has no obligation to make, and does not commit to make, any such revisions. Download the latest
version from www.chauvetprofessional.com
.
Document Revision
This Ovation E-930VW User Manual is the 4
th
edition of this document. Go to
www.chauvetprofessional.com
for the latest version.
Ovation E-930VW User Manual Rev. 4
Table of Contents
i
TABLE OF CONTENTS
1. Before You Begin ....................................................................... 1
What Is Included ........................................................................................... 1
Claims ........................................................................................................... 1
Manual Conventions ..................................................................................... 1
Symbols ........................................................................................................ 1
Safety Notes.................................................................................................. 2
Personal Safety.............................................................................................................. 2
Mounting and Rigging .................................................................................................... 2
Power and Wiring........................................................................................................... 2
Operation ...................................................................................................... 2
Expected LED Lifespan................................................................................. 2
2. Introduction ................................................................................ 3
Description .................................................................................................... 3
Features........................................................................................................ 3
Lens Tube ..................................................................................................... 3
Product Overview.......................................................................................... 4
Product Dimensions ...................................................................................... 5
3. Setup ........................................................................................... 6
AC Power...................................................................................................... 6
AC Plug .......................................................................................................................... 6
Power Linking................................................................................................................. 6
Fuse Replacement ......................................................................................................... 6
DMX Linking.................................................................................................. 6
DMX Personalities.......................................................................................................... 6
Remote Device Management (RDM) ............................................................................. 6
Master/Slave Connectivity............................................................................. 7
Mounting ....................................................................................................... 7
Orientation...................................................................................................................... 7
Rigging ........................................................................................................................... 7
Procedure....................................................................................................................... 7
Manual Beam Focus Control.......................................................................................... 8
Rotating the Barrel Assembly......................................................................................... 8
Accessory Slot ............................................................................................................... 8
4. Operation .................................................................................... 9
Control Panel Operation................................................................................ 9
Control Options ............................................................................................. 9
Programming................................................................................................. 9
Configuration (DMX) ..................................................................................... 9
DMX Personalities.......................................................................................................... 9
Starting Address............................................................................................................. 9
Menu Map ..................................................................................................... 10
Configuration (Standalone) ........................................................................... 13
Static Mode .................................................................................................................... 13
Red Shift ........................................................................................................................ 13
Master/Slave .................................................................................................................. 13
Dimmer Curve ................................................................................................................ 13
Dimmer Profiles.............................................................................................................. 13
White Balance ................................................................................................................ 14
LED Frequency .............................................................................................................. 14
Fan Mode ....................................................................................................................... 14
Back Light ...................................................................................................................... 14
System Information ........................................................................................................ 14
Table of Contents
Ovation E-930VW User Manual Rev. 4
ii
Factory Reset................................................................................................................. 14
Preset Color Temperature Chart................................................................... 15
DMX Values .................................................................................................. 15
18Ch............................................................................................................................... 15
16Ch............................................................................................................................... 16
12Ch............................................................................................................................... 16
9Ch................................................................................................................................. 17
6Ch................................................................................................................................. 17
6Ch2............................................................................................................................... 17
4Ch................................................................................................................................. 17
5. Technical Information ................................................................ 18
Product Maintenance .................................................................................... 18
6. Technical Specifications ........................................................... 19
Photometrics Charts ..................................................................................... 20
Returns............................................................................................ 25
Contact Us ...................................................................................... 26
Page 1 of 26
Ovation E-930VW User Manual Rev. 4
BEFORE YOU BEGIN
1. Before You Begin
What Is Included
Claims
Carefully unpack the product immediately and check the container to make sure all the parts are in the
package and are in good condition.
If the box or the contents (the product and included accessories) appear damaged from shipping, or show
signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier
immediately may invalidate customer’s claim. In addition, keep the box and contents for inspection.
For other issues, such as missing components or parts, damage not related to shipping, or concealed
damage, file a claim with Chauvet within 7 days of delivery.
Manual Conventions
Symbols
FCC Compliance
This device complies with Part 15 Part B of the FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause
undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
• Ovation E-930VW
• Neutrik® powerCON® power cord
• Quick Reference Guide
Convention Meaning
1–512 A range of values
50/60 A set of values of which only one can be chosen
<SET> A button on the product’s control panel
Settings A product function or a menu option
Symbol Meaning
Electrical warning. Not following these instructions may cause electrical damage to
the product, accessories, or the user.
Critical installation, configuration, or operation information. Not following these
instructions may make the product not work, cause damage to the product, or cause
harm to the operator.
Important installation or configuration information. The product may not function
correctly if this information is not used.
Useful information.
The term “DMX” used throughout this manual refers to the USITT DMX512-A
digital data transmission protocol.
!
Page 2 of 26
BEFORE YOU BEGIN
Ovation E-930VW User Manual Rev. 4
Safety Notes
Read all the following safety notes before working with this product. These notes contain important
information about the installation, usage, and maintenance of this product.
Personal Safety
• Avoid direct eye exposure to the light source while the product is on.
• Always disconnect the product from the power source before cleaning or replacing the fuse.
• Always connect the product to a grounded circuit to avoid the risk of electrocution.
• Do not touch the product’s housing when operating because it may be very hot.
Mounting and Rigging
• Do not operate this product outdoors or in any location where dust, excessive heat, water, or
humidity may affect it (IP20).
• Do not leave any flammable material within 50 cm of this product while operating or connected to
power.
• CAUTION: When transferring product from extreme temperature environments, (e.g., cold truck to warm,
humid ballroom) condensation may form on the internal electronics of the product. To avoid causing a
failure, allow product to fully acclimate to the surrounding environment before connecting it to power.
• Mount this product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent
surfaces.
• When hanging this product, always secure to a fastening device using a safety cable.
• Use only the hanging/mounting bracket to carry this product.
Power and Wiring
• Always ensure that the product is connected to proper voltage in accordance with the specifications
in this manual or on the product’s specification label.
• Never connect the product to a dimmer pack or rheostat.
• Never disconnect this product by pulling or tugging on the power cable.
Operation
• Do not operate this product if there is damage on the housing, lenses, or cables. Have the damaged
parts replaced by an authorized technician at once.
• Do not cover the ventilation slots when operating to avoid internal overheating.
• The maximum ambient temperature is 113 °F (45 °C). Do not operate the product at higher temperatures.
• The minimum startup temperature is -4°F (-20°C). Do not start the product at lower temperatures.
• The minimum ambient temperature is -22°F (-30°C). Do not operate the product at lower temperatures.
• In the event of a serious operation problem, stop using this product immediately!
Expected LED Lifespan
LEDs gradually decline in brightness over time, primarily because of heat. LEDs that are arranged in
clusters experience higher operating temperatures than single LEDs. For this reason, operating clustered
LEDs at their fullest intensity significantly reduces the LEDs’ lifespan. Under normal conditions, this
lifespan is 40,000 to 50,000 hours. If extending this lifespan is vital, lower the operating temperature by
improving the ventilation around the product, thus reducing the ambient temperature. In addition, limiting
the overall projection intensity may extend the LEDs’ lifespan.
This product contains no user-serviceable parts. Any reference to servicing in
this User Manual will only apply to properly trained, certified technicians. Do not
open the housing or attempt any repairs.
All applicable local codes and regulations apply to proper installation of this
product.
If your Chauvet product requires service, contact Chauvet Technical Support.
!
Page 3 of 26
Ovation E-930VW User Manual Rev. 4
INTRODUCTION
2. Introduction
Description
The Ovation E-930VW is a high-performance, variable white ellipsoidal-style fixture that uses Chauvet’s
unique six-color LED system. The fixture projects a bright and beautifully flat field of light in nearly any
temperature of white with high CRI and CQS. Each color temperature can be further adjusted for +/- green
to perfect the field of light. Full control of each color is available for times when a splash of color is needed.
Features
• Operating modes:
• 4-channel: dimmer, color temperature, hue
• 6-channel: dimmer, 16-bit dimmer, color temperature, hue, strobe
• 6-channel: red, orange, green, royal blue, blue, lime
• 9-channel: dimmer, red, orange, green, royal blue, blue, lime, strobe
• 12-channel: dimmer, red, orange, green, royal blue, blue, lime, strobe, color temperature, hue,
dimmer speed
• 16-channel: dimmer, 16-bit dimmer, red, red fine, orange, orange fine, green, green fine, royal
blue, royal blue fine, blue, blue fine, lime, lime fine, strobe
• 18-channel: dimmer, 16-bit dimmer, red, red fine, orange, orange fine, green, green fine, royal
blue, royal blue fine, blue, blue fine, lime, lime fine, strobe, color temperature, hue
• Variable white ERS-style lighting fixture for theatre, film, and production
• Color temperature presets from 2800 K to 8000 K with high CRI and CQS
• Beautiful 16-bit dimming
• Proprietary LED engine delivers tremendous equal output at all color temperatures
• +/- green adjustment via DMX or on-board control
• Independent color control over the six-color engine when a splash of color is needed
• RDM (Remote Device Management) for added flexibility
• Adjustable PWM (Pulse Width Modulation) to avoid flickering on camera
• Virtually silent operation for use in studio and theater applications
• Works perfectly with industry-standard lens tubes and accessories
Lens Tube
The following lens tubes are available for purchase:
• 14° w/ gel frame (7.5 in/191 mm accessories)
• 19° w/ gel frame (6.25 in/159 mm accessories)
• 26° w/ gel frame (6.25 in/159 mm accessories)
• 36° w/ gel frame (6.25 in/159 mm accessories)
• 50° w/ gel frame (6.25 in/159 mm accessories)
• 15°–30° w/ gel frame (7.5 in/191 mm accessories)
• 25°–50° w/ gel frame (7.5 in/191 mm accessories)
Page 4 of 26
INTRODUCTION
Ovation E-930VW User Manual Rev. 4
Product Overview
Menu
buttons
Display
powerCON® in/out
Barrel rotation knobs
3- and 5-pin DMX in/out
Handle
Pattern holder slot
(A-size holder for 3-in patterns.
B-size holder for 2.5-in and 2.75-
in patterns, sold separately)
Framing shutter (x4)
Accessory slot
Beam focus
knobs
Gel frame
holder
Light engine
Barrel
assembly
Lens tube
(sold separately)
Fuse holder
Page 5 of 26
Ovation E-930VW User Manual Rev. 4
INTRODUCTION
Product Dimensions
25 in
636 mm
28 in
800 mm
13.5 in
344 mm
23 in
590 mm
Page 6 of 26
SETUP
Ovation E-930VW User Manual Rev. 4
3. Setup
AC Power
Each Ovation E-930VW has an auto-ranging power supply that works with an input voltage range of 100 to
240 VAC, 50/60 Hz. To determine the power requirements for each Ovation E-930VW, refer to the label
affixed to the product or to the Technical Specifications
chart in this manual.
The listed current rating indicates the maximum current draw during normal operation. For more
information, download Sizing Circuit Breakers from the Chauvet website: www.chauvetprofessional.com
.
AC Plug
The Ovation E-930VW comes with a power input cord terminated with a Neutrik® powerCON® connector
on one end and an Edison plug on the other end (U.S. market). If the power input cord that came with the
product has no plug, or if the plug needs to be changed, use the table below to wire the new plug.
Power Linking
The product supports power linking. It is possible to power link up to 5 products at 120 V, up to 9 products
at 208 V, or up to 10 products at 230 V. This product comes with a power input cord. Power-linking cables
are available for purchase from Chauvet.
Fuse Replacement
1. Disconnect this product from the power outlet.
2. Using a Phillips-head screwdriver, unscrew the fuse holder cap from the housing.
3. Remove the blown fuse and replace with another fuse of the same type and rating (T 3.15 A, 250 V).
4. Screw the fuse holder cap back in place and reconnect power.
DMX Linking
The Ovation E-930VW can be linked to a DMX controller using a 3- and 5-pin DMX connection. If using
other DMX-compatible products with this product, it is possible to control each individually with a single
DMX controller.
DMX Personalities
The Ovation E-930VW uses a 3- and 5-pin DMX data connection for the 4Ch, 6Ch, 6Ch2, 9Ch, 12Ch,
16Ch, and 18Ch DMX personalities.
• Refer to the Introduction
for a brief description of each DMX personality.
• Refer to the Operation
chapter to learn how to configure the Ovation E-930VW to work in these
personalities.
•The Configuration (Standalone)
section provides detailed information regarding the DMX
personalities.
Remote Device Management (RDM)
Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate
bi-directionally along existing DMX cabling. Check the DMX controller’s User Manual or with the
manufacturer, as not all DMX controllers have this capability. The Ovation E-930VW supports RDM
protocol that allows feedback to make changes to menu map options.
• Always connect the product to a protected circuit (a circuit breaker or fuse). Make sure
the product has an appropriate electrical ground to avoid the risk of electrocution or fire.
• To eliminate unnecessary wear and improve its lifespan, during periods of non-use
completely disconnect the product from power via breaker or by unplugging it.
Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if
the rheostat or dimmer channel serves only as a 0 to 100% switch.
Connection Wire (U.S.) Wire (Europe) Screw Color
AC Live Black Brown Yellow or Brass
AC Neutral White Blue Silver
AC Ground Green/Yellow Green/Yellow Green
Make sure to disconnect the product’s power cord before replacing a blown fuse.
Always replace the blown fuse with another of the same type and rating.
For information about DMX standards, Master/Slave connectivity, or the DMX cables
needed to link this product to a DMX controller, download the DMX Primer from the
Chauvet website: www.chauvetprofessional.com
.
!
!
Page 7 of 26
Ovation E-930VW User Manual Rev. 4
SETUP
Master/Slave Connectivity
The Master/Slave mode allows an Ovation E-930VW (the master) to control one or more Ovation E-
930VW products (the slaves) without a DMX controller. One Ovation E-930VW becomes the master when
running an auto or custom program, or by being in a Static mode.
Each slave’s control panel must be configured to operate in Slave mode. During Master/Slave operation,
the slaves will operate in unison with the master.
Mounting
Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes.
For CHAUVET Professional line of mounting clamps, go to: http://trusst.com/products/
.
Orientation
Always mount this product in a safe position, ensuring that there is adequate room for ventilation,
configuration, and maintenance.
Rigging
Chauvet recommends using the following general guidelines when mounting this product:
• Before deciding on a location for the product, make sure there is easy access to the product for
maintenance and programming purposes.
• Make sure that the structure onto which the product will be mounted can support the product’s
weight. See the Technical Specifications
for weight information.
• When mounting the product overhead, always use a safety cable. Mount the product securely to a
rigging point, whether an elevated platform or a truss.
• When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity.
• When power linking multiple products, mount the products close enough for power-linking cables to reach.
• The bracket adjustment knobs allow for directional adjustment when aiming the product to the desired
angle. Only loosen or tighten the bracket knobs manually. Using tools could damage the knobs.
Procedure
The Ovation E-930VW comes with a double-bracketed yoke that can be used as a floor stand or to which
mounting clamps can be attached for hanging. Mounting clamps must be purchased separately. Ensure that the
clamps can support the weight of this product. Use at least one mounting point per product where necessary.
Mounting Diagram
DO NOT connect a DMX controller to products operating in Master/Slave mode. The
DMX controller signals may interfere with the signals from the master.
• The Operation section of this manual provides detailed instructions on how to
configure the master and slaves.
• For more information about DMX standards or the DMX cables needed to link this
product to a DMX controller, download the DMX primer from the Chauvet website:
www.chauvetprofessional.com.
Safety cable
(such as CH-05 from Chauvet)
Mounting clamp
(such as CTC-50 or CTC-50HCN
from Chauvet)
Mounting bracket
Bracket adjustment knob
Secure the safety cable
using the passageway on
the top of the product
Page 8 of 26
SETUP
Ovation E-930VW User Manual Rev. 4
Manual Beam Focus Control
The Ovation E-930VW has a manual focus, which is adjusted as follows:
1. Locate the beam focus knobs at the top and bottom of the barrel assembly.
2. Loosen the knobs by turning them counter-clockwise.
3. Slide the lens tube forward or backward until the desired focus or beam edge is achieved.
4. Tighten the knobs by turning them clockwise, which lock the lens tube’s position.
Rotating the Barrel Assembly
The Ovation E-930VW allows manual rotation of the barrel assembly, as follows:
1. Locate the barrel rotation knobs at the top and bottom of the light engine.
2. Loosen the knobs by turning them counterclockwise. (Note: Do not remove the knobs.)
3. Rotate the barrel to the desired position, up to 25° in either direction from the centered position.
4. Tighten the knobs by turning them clockwise, which locks the barrel’s position.
Accessory Slot
The Ovation E-930VW has an accessory slot, which holds a drop-in iris, a motorized pattern device, or
various other optional accessories (sold separately).
1. Loosen the thumbscrews on the slot cover. (Note: Do not remove the thumbscrews).
2. Slide to cover forward.
3. Insert an accessory. (Note: Make sure to insert the accessory correctly, i.e., the iris handle
extends upward from the slot.)
4. Slide the cover back. Make sure any handles or adjustment tools that stick out the top are able to
function correctly.
5. Tighten the thumbscrews to secure the cover.
To avoid changing menu settings while focusing the Ovation E-930VW, press and
hold the <ENTER> button for 3 seconds. This will put the product in Focus Mode, by
increasing the intensity to 100%. To exit out of focus mode, press <MENU>.
Ensure that the barrel assembly is oriented with the pattern holder and accessory
slots at the top of the product.
• When not using the accessory slot, replace and secure the slot cover to prevent
light leakage during operation.
• When obtaining any optional accessories, ensure that the items are compatible
with the Ovation E-930VW.
Iris handleThumb screws
Accessory Slot Cover
Sample Drop-in Iris
Page 9 of 26
Ovation E-930VW User Manual Rev. 4
OPERATION
4. Operation
Control Panel Operation
Control Options
Set the Ovation E-930VW starting address in the 001-512 DMX range. This enables control of up to 10
products in the 18-channel personality.
Programming
Refer to the Menu Map to understand the menu options. The menu map shows the main level and a
variable number of programming levels for each option.
• To go to the desired main level, press <MENU> repeatedly until the option shows on the display.
Press <ENTER> to select. This will show the first programming level for that option.
• To select an option or value within the current programming level, press <UP> or <DOWN> until
the option shows on the display. Press <ENTER> to select. This will show either the first option if
there is another programming level, or the selected value.
• Press <MENU> repeatedly to exit to the previous main level.
Configuration (DMX)
Use DMX configurations to operate the product with a DMX controller.
DMX Personalities
This setting allows the user to choose a particular DMX personality.
1. Go to the DMX Channel main level.
2. Select the desired personality (4Ch, 6Ch, 6Ch2, 9Ch, 12Ch, 16Ch, and 18Ch).
Starting Address
In this mode, each product will respond to a unique starting address from the DMX controller. All products
with the same starting address will respond in unison.
1. Go to the DMX Address main level.
2. Set the starting address (001–512).
The highest recommended starting address for each DMX mode is as follows:
Button Function
<MENU>
Exits from the current menu or function
<ENTER>
Enables the currently displayed menu or sets the currently selected value in to the current
function
<UP>
Navigates upward through the menu list or increases the numeric value when in a function
<DOWN>
Navigates downward through the menu list or decreases the numeric value when in a
function
• See the Starting Address section for the highest starting address suggested for each
personality.
• Make sure that the starting addresses on the various products do not overlap due to
the new personality setting.
DMX Personality DMX Address DMX Personality DMX Address
4Ch 509 12Ch 501
6Ch 507 16Ch 497
9Ch 504 18Ch 495
Page 10 of 26
OPERATION
Ovation E-930VW User Manual Rev. 4
Menu Map
Main Level Programming Levels Description
DMX
Address
001–512*
Selects DMX address (highest channel
restricted to personality chosen)
DMX
Channel
4Ch
4-channel: dimmer, color temperature,
hue, red shift
6Ch
6-channel: dimmer, dimmer fine, color
temperature, hue, strobe, red shift
6Ch2
6-channel: red, orange, green, royal
blue, blue, lime,
9Ch
9-channel: dimmer, red, orange, green,
royal blue, blue, lime strobe, red shift
12Ch
12-channel: dimmer, red, orange, green,
royal blue, blue, lime strobe, color
temperature, hue, dimmer speed, red shift
16Ch
16-channel: dimmer, dimmer fine, red,
red fine, orange, orange fine, green,
green fine, royal blue, royal blue fine,
blue, blue fine, lime, lime fine, strobe,
red shift
18Ch
18-channel: dimmer, dimmer fine, red,
red fine, orange, orange fine, green,
green fine, royal blue, royal blue fine,
blue, blue fine, lime, lime fine, strobe,
color temperature, hue, red shift
Page 11 of 26
Ovation E-930VW User Manual Rev. 4
OPERATION
Static
Color
Temperature
2800K
Dimmer 0–255
Preset white color temperatures.
Emulates a tungsten lamp at the
specified color temperature. Refer to the
Preset Color Temperature Chart
for
specific values.
2900K
3000K
3100K
3200K
3300K
3400K
3500K
3600K
3700K
3800K
3900K
4000K
4100K
4200K
4300K
Hue -25–25
4400K
4500K
4600K
4700K
4800K
4900K
5000K
5100K
5200K
5300K
5400K
5500K
5600K
5700K
6000K
6500K
7000K
7500K
8000K
Manual
Color Mixer
Red
0–255
Combines red, orange, green, royal
blue, blue, and lime to make a custom
color (0–100%)
Orange
Green
Royal Blue
Blue
Lime
Red Shift
On
Mimics halogen lamp dimming
Off
Master/
Slave
Master
Receives DMX signal from the DMX
controller (master)
Slave
Receives DMX signal from the master
unit
Dimmer
Curve
Linear
Sets the dimmer curve
Square
I Square
SCurve
Dimmer
Mode
Off Linear dimmer
Dimmer 1–3
Dimming curves, from fast (Dimmer 1)
to slow (Dimmer 3)
Main Level Programming Levels Description
Page 12 of 26
OPERATION
Ovation E-930VW User Manual Rev. 4
White
Balance
Off Uses factory default white setting
Manual
Red
125–255
Sets red LED maximum value
Orange Sets orange LED maximum value
Green Sets green LED maximum value
Royal Blue Sets royal blue LED maximum value
Blue Sets blue LED maximum value
Lime Sets lime LED maximum value
LED
Frequency
600Hz
Sets the PWM frequency
1200Hz
2000Hz
4000Hz
6000Hz
25KHz
Fan Mode
Auto Sets the fan to auto mode
On Sets the fan to always on
Off Sets the fan to always off
Silent Sets the fan to silent
Back Light
10S
Turns off display backlight after
10 seconds of inactivity
30S
Turns off display backlight after
30 seconds of inactivity
2Min
Turns off display backlight after
2 minutes of inactivity
Always On Display backlight always on
Information
Fixture Hours _ _ _ _H
Shows total hours the product has been
powered on
Version V_._ Shows current firmware version
UID _ _ _ _ _ _ _ _ _ _ _ _ Shows product UID
Reset
Factory
No
Resets the product to factory default
settings
Yes
Main Level Programming Levels Description
Page 13 of 26
Ovation E-930VW User Manual Rev. 4
OPERATION
Configuration (Standalone)
Use standalone configuration to operate the product without a DMX controller.
Static Mode
The Static mode allows for an unchanging color without a DMX controller.
Color Temperature
To select a color temperature, do the following:
1. Go to the Static main level.
2. Select Color Temperature.
3. Select the desired color temperature (see Configuration (Standalone)
).
4. Select the desired output level (0–255).
Manual Color Mixer
The do color mixing without a DMX controller, follow the instructions below:
1. Go to the Static main level.
2. Select Manual Color Mixer.
3. Select the color to edit (Red, Orange, Green, Royal Blue, Blue, or Lime Green).
4. Select the desired output level for that color (0–255).
5. Repeat steps 3 and 4 until product outputs as desired.
Red Shift
The Red Shift function causes the amber LEDs to imitate the appearance of a halogen lamp when dimming.
To adjust the Red Shift function, do the following:
1. Go to the Red Shift main level.
2. Select On or Off.
Master/Slave
The Master/Slave mode allows a group of Ovation E-930VW products (the slaves) to simultaneously
duplicate the output of another Ovation E-930VW (the master) without a DMX controller.
To set each of the slaves:
1. Go to the Master/Slave main level
2. Select Slave.
To set the master:
1. Go to the Master/Slave main level
2. Select Master.
3. Select a static setting.
Dimmer Curve
To set the dimmer curve, follow the instructions below:
1. Go to the Dimmer Curve main level.
2. Select the desired option (Linear, Square, I Squa, or SCurve).
Dimmer Profiles
This setting determines how fast the output of the Ovation E-930VW changes when the output value is
modified. It provides four different options to simulate the dimming curve of an incandescent lighting product.
To select a specific dimmer profile, do the following:
1. Go to the Dimmer Mode main level.
2. Select a dimmer curve (Off, Dimmer 1, Dimmer 2, or Dimmer 3).
• The master is the one that runs a program whether in Auto or Static mode.
• Do not connect a DMX controller to the products configured for Master/Slave
operation. The DMX controller may interfere with signals from the master.
• The master should be the first product in the daisy chain.
Off: The output is proportional (linear) to the dimmer channel value.
Dimmer 1-3: The output follows the dimmer value based on the corresponding dimmer
curve, Dimmer 1 being the fastest.
Page 14 of 26
OPERATION
Ovation E-930VW User Manual Rev. 4
White Balance
This setting determines the maximum output values for each color, which affects the appearance of a full
output white.
1. Go to the White Balance main level.
2. Select Off (the product will use a default setting) or Manual.
3. For Manual mode, select the color value to edit (Red, Orange, Green, Royal Blue, Blue, or
Lime Green).
4. Set the maximum value for the selected color (125–255).
5. Repeat steps 3 and 4 until the product outputs as desired.
LED Frequency
This option changes the Pulse Width Modulation (PWM) frequency of the LEDs on the
Ovation E-930VW. To do so, follow the instructions below:
1. Go to the LED Frequency main level.
2. Select PWM Frequency (600Hz, 1200Hz, 2000Hz, 4000Hz, 6000Hz, or 25Khz).
Fan Mode
This setting determines how the fan speed on the Ovation E-930VW is set.
1. Go to the Fan Mode main level
2. Select Auto (fan speed will increase or decrease based on product temperature), Off (fan will
stay off. Product output will decrease based on product temperature), Silent (fan will maintain a
constant silent speed), or On (fan speed will always be at maximum).
Back Light
This setting allows for selection of the amount of time the backlight on the Ovation E-930VW’s display
stays on after the last button is pressed on the control panel.
1. Go to the Back Light main level.
2. Select 10S (10 seconds), 30S (30 seconds), 2Min (2 minutes), or Always On (remains on).
System Information
This option displays the total number of hours the product has run, the installed software version, and the
product’s UID.
1. Go to the Information main level.
2. Select Fixture Hours, Version, or UID.
Factory Reset
This option restores the Ovation E-930VW to factory default settings.
1. Go to the Reset Factory main level.
2. Select No or Yes.
NOTICE: When operating in Fan Mode: Off, the output of the fixture will be reduced
and will not reach the same levels as when using other fan modes.
WARNING: When operating in Fan Mode: Off, the fixture will become hotter to the
touch than when using other fan modes. Use proper protective equipment to prevent
burns. Keep a safe distance from flammable objects.
!
Page 15 of 26
Ovation E-930VW User Manual Rev. 4
OPERATION
Preset Color Temperature Chart
DMX Values
18Ch
DMX Channel Value Display Readout DMX Channel Value Display Readout
000 005 2800K/No function 125 132 4500K–4600K
006 013 2800K–2900K 132 139 4600K–4700K
013 020 2900K–3000K 139 146 4700K–4800K
020 027 3000K–3100K 146 153 4800K–4900K
027 034 3100K–3200K 153 160 4900K–5000K
034 041 3200K–3300K 160 167 5000K–5100K
041 048 3300K–3400K 167 174 5100K–5200K
048 055 3400K–3500K 174 181 5200K–5300K
055 062 3500K–3600K 181 188 5300K–5400K
062 069 3600K–3700K 188 195 5400K–5500K
069 076 3700K–3800K 195 202 5500K–5600K
076 083 3800K–3900K 202 209 5600K–5700K
083 090 3900K–4000K
209 216 5700K–6000K
090 097 4000K–4100K 216 223 6000K–6500K
097 104 4100K–4200K 223 230 6500K–7000K
104 111 4200K–4300K 230 237 7000K–7500K
111 118 4300K–4400K 237 244 7500K–8000K
118 125 4400K–4500K 244 255 8000K
Note: The color temperatures above are simulated renditions of the color output
produced as compared to a tungsten lamp at the specified color temperature. Chauvet
makes no guarantee of the color output accuracy.
Channel Function Value Percent/Setting
1 Dimmer 000 255 0–100%
2 Dimmer fine 000 255 0–100%
3Red 000 255 0–100%
4Red fine 000 255 0–100%
5 Orange 000 255 0–100%
6 Orange fine 000 255 0–100%
7Green 000 255 0–100%
8Green fine 000 255 0–100%
9 Royal blue 000 255 0–100%
10 Royal blue fine 000 255 0–100%
11 Blue 000 255 0–100%
12 Blue fine 000 255 0–100%
13 Lime 000 255 0–100%
14 Lime fine 000 255 0–100%
15 Strobe
000 010 No function
011 255 Strobe, slow to fast
16 Color temperature 000 255 Refer to Preset Color Temperature Chart
17 Hue
000 000 No function
001 255 Adjusts +/- green
18 Red shift
000 010 No function
011 127 On
128 255 Off
Page 16 of 26
OPERATION
Ovation E-930VW User Manual Rev. 4
16Ch
12Ch
Channel Function Value Percent/Setting
1Dimmer 000 255 0–100%
2 Dimmer fine 000 255 0–100%
3Red 000 255 0–100%
4Red fine 000 255 0–100%
5Orange 000 255 0–100%
6 Orange fine 000 255 0–100%
7Green 000 255 0–100%
8Green fine 000 255 0–100%
9 Royal blue 000 255 0–100%
10 Royal blue fine 000 255 0–100%
11 Blue 000 255 0–100%
12 Blue fine 000 255 0–100%
13 Lime 000 255 0–100%
14 Lime fine 000 255 0–100%
15 Strobe
000 010 No function
011 255 Strobe, slow to fast
16 Red shift
000 010 No function
011 127 On
128 255 Off
Channel Function Value Percent/Setting
1 Dimmer 000 255 0–100%
2Red 000 255 0–100%
3 Orange 000 255 0–100%
4Green 000 255 0–100%
5 Royal blue 000 255 0–100%
6Blue 000 255 0–100%
7Lime 000 255 0–100%
8Strobe
000 010 No function
011 255 Strobe, slow to fast
9 Color temperature 000 255 Refer to Preset Color Temperature Chart
10 Hue
000 000 No function
001 255 Adjusts +/- green
11
Dimmer speed
(Hold for 3 seconds:
Overrides and changes menu
selection.)
000 051 No function
052 101 Dimmer speed mode off
102 152 Dimmer speed mode 1
153 203 Dimmer speed mode 2
204 255 Dimmer speed mode 3
12 Red shift
000 010 No function
011 127 On
128 255 Off
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30

Chauvet OVATION User manual

OVATION
Chauvet
Brand
Chauvet
Model
OVATION
Category
Stroboscopes & disco lights
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents