Dometic 317729100 Vacuum Tank Installation guide

317729100 VACUUM TANK ASSEMBLY INSTRUCTIONS

INLET

OUTLET

TYPE 1

TYPE 3

TYPE 4

TYPE 2

SOLVENT WELD

USE ELBOW ON

INLET WHEN NO

ALTERNATIVE

IS POSSIBLE

1-1/2" SCHEDULE 40 PVC PIPE

VACUUM TANK SOLVENT WELDING INSTRUCTIONS

Determine location and mounting (horizontal or vertical) of vacuum tank by instructions

in owner's or installation manual.

Select ttings needed from those provided with tank.

IMPORTANT

Use PVC cleaner on all solvent weld joints prior to solvent welding.

Use PVC cement with Tetrahydrofuran for solvent weld joints.

Follow instructions on PVC cleaner and PVC cement for maximum adhesion and safety.

REVISION A

Form No. 600342010 11/17

Dometic Corporation, Sanitation Division

13128 State Rt. 226, P.O. Box 38

Big Prairie, OH 44611 USA

1-800-321-9886 • Fax: 330-496-3097

www.Dometic.com