4 Cable Assembly
Installation Guide
Wiring diagram to use 2-REMO Function
1. When installing 2 wired remote controllers to one or more air conditioners, please
connect as above picture.
[Note]
1) Some Wired Remote Controller can not use '2-REMO' function.
It depends on the Controller's type. For more detail, refer to the Controller's Manual.
2) When installing more than 2 units of wired remote controller to one air conditioner, set
one wired remote controller as master and the others all as slaves, as shown picture.
• Refer to Installer setting section on Manual of Wired Remote Controller.
Wired controller
MASTER SLAVE
Wired controller
Installation Guide