2. CTA
  3. ADD-MAAVFL

CTA ADD-MAAVFL User manual

  • Hello! I've reviewed the user manual for the CTA Digital ADD-MAAVFL Medical VESA Compatible Articulating Arm Rolling Floor Stand. This document provides detailed instructions on how to assemble the stand, including mounting the articulating arm and managing cables. I'm ready to assist you with any questions you have about this product.
  • How do I assemble the handle on the pole?
    How do I screw on the articulating arm canopy?
    How do I insert the VESA into the arm?
    Is it possible to route a cable?
    What should I do before using?
Medical VESA Compatible
Articulating Arm Rolling Floor Stand
Package Contents:
Instructions:
ADD-MAAVFL
Loosen the handle grip
Tighten the screws on the handle grip
as shown sa securely fastened
Place the endcap
on the top of floor
stand
Slide handle into the
groove of the pole to
desired height.
1. Assemble handle on pole
2. Screw on articulating arm canopy 3. Insert arm portion
into wall mount and
tighten using allen key
(as illustrated)
4. Insert VESA into the
arm and use allen key
to tigthen secury.
5. Optional - Cable Routing - Attach cable to
device and route through the arm in the
dedicated slot. (as shown) Screw on the slot
cap afterwards to tuck away the wire.
A. How to tighten VESA joint
B. How to screw in VESA
compatible item to VESA
/