HKBN QL6SUKW is a smart lamp with wireless charging capabilities that lets you adjust brightness, color temperature, and scenes through the HKBN Home app. With Cantonese voice controls, you can use Siri shortcuts on specified iOS devices to operate the lamp. Create automations to turn on the lamp at specific times or when certain conditions are met, like when you enter the room. The lamp also features a countdown timer and various scene modes for different occasions, such as movie time, reading, or welcome home.
HKBN QL6SUKW is a smart lamp with wireless charging capabilities that lets you adjust brightness, color temperature, and scenes through the HKBN Home app. With Cantonese voice controls, you can use Siri shortcuts on specified iOS devices to operate the lamp. Create automations to turn on the lamp at specific times or when certain conditions are met, like when you enter the room. The lamp also features a countdown timer and various scene modes for different occasions, such as movie time, reading, or welcome home.
1
MOMAX Bright IoT Lamp
with Wireless Charger
(Model: QL6SUKW)
HKBN Home User Guide
v.20210809
2
Table of contents
Product Description ............................................................................ 3
Download HKBN Home App ................................................................ 4
Add Device .......................................................................................... 5
Control Device .................................................................................... 9
− Introduction of Control Panel ................................................... 9
− Switch On/Off ........................................................................ 10
− Adjust Color Temperature and Brightness ............................. 11
− Scene Mode ........................................................................... 12
− Timer (Countdown) ................................................................ 13
Scene (Smart Action) ......................................................................... 14
Automation (Smart Action) ............................................................... 16
Device Information ........................................................................... 19
− Page Layout ............................................................................ 19
− Check for Firmware Upgrade ................................................. 20
− Remove Device ....................................................................... 21
Product Specifications ....................................................................... 22
Product Maintenance and Warranty ................................................ 23
3
Product Description
Name: MOMAX Bright IoT Lamp with Wireless Charger
Model: QL6SUKW
Product Features:
1. Adjust brightness, colour temperature via HKBN Home App
2. Cantonese voice controls*
*Voice Control works with Siri shortcuts on specified iOS devices.
4
Download HKBN Home App
OR
Scan the QR code below
Search and download “HKBN Home”
APP in Apple App Store OR Google
Play Store
5
Add Device
1. You must first connect your phone to a 2.4GHz Wi-Fi network when
adding device;
2. Tap “Devices” on the bottom menu (image 1);
3. Tap “Add Device” button OR “+” icon at top right corner if you already
have paired device (image 2);
(image 1)
(image 2)
6
4. Tap “Bright IoT Lamp” from left menu “MOMAX” (image 3);
5. Power on the device (keeps the light OFF), then hold the Wi-Fi button
until the Wi-Fi indicator blinks (image 4);
(image 3)
(image 4)
7
6. Select Wi-Fi network and enter password*, and then tap “Next” (image
5);
7. Please wait a moment while our device is in pairing process (image 6).
* Important tips: Wi-Fi requirement
⚫ Currently all smart devices are compatible to 2.4GHz network only. Please make sure
that your device and mobile are connected with 2.4GHz but not 5GHz Wi-Fi network.
⚫ If you have 2.4GHz and 5GH Wi-Fi channel and they are using same SSID, we suggest
to edit it to different name before pairing. If you insist to use the same SSID on two
channels, please turn off the 5GHz channel first before pairing.
⚫
(image 5)
(image 6)
8
8. After device added successfully, you can change the device name and
assign it to the located room. (You can also change the device name
and room location later in device setting page and room management
page.) And you can find the added device in the “Device” page.
Device
Name
Room
Selection
Bright IoT Lamp
9
Control Device
• Introduction of Control Panel
Device Information
Brightness adjustment
Scene Selection
On/Off control
Color Temperature
adjustment
Timer
Main Page
10
• Switch On/Off
You can press the desk lamp icon to turn on/off your desk lamp remotely.
11
• Adjust Color Temperature and Brightness
You can adjust the color temperature and brightness by dragging the
scroll bar.
Brightness adjustment
Color Temperature
adjustment
12
• Scene Mode
You can set different light scenes by your favorite color temperature,
flash mode and flash speed of the light.
Scene
name
Color
Selection
Color Flash
mode
Color Flash
speed
13
• Timer (Countdown)
You can set coundown timer to turn on and off your desk lamp by
selecting “Timer” in the menu.
14
Scene (Smart Action)
The integration of different smart devices is the beauty of smart home living
which provides convenience and many possibilities of creating your preferred
control settings. By setting SCENE, you can execute different smart devices at
the same time by only one single tap. You can tailor make your unique scene
such as movie time scene, welcome/back home scene, reading scene etc.
User Voice Command to Turn On/Off Desk Lamp
Instructions below explain how to create a Scene:
1. In “Smart Action” under the
page of “Scene”, tap “+” to add
new scene, and then tap “Add
Action”
2. Select Bright IoT Lamp and tap
“Switch”, and then select “On”.
(If turn off the lamp then select
“Off”)
3. Tap to enable “Show on
Dashboard Widgets”, tap “Save”
on the top right corner to
complete
15
How to add Siri Command into Scene:
1. In the page of “Scene”, tap
“Add to Siri”
2. In “Siri Shortcuts”, select the
scene you would like to add
Voice command
1.
2.
3. Input the voice command you
want and then tap “Add to Siri”
to complete
16
Automation (Smart Action)
AUTOMATION can carry out device actions automatically by pre-conditions like
environment factors or smart device status. You can handover this complex
and important daily works to HKBN Home for a convenient and simple living.
Automation included the setting of Temperature, Humidity, Weather and
Schedule as condition to trigger different control in smart devices. Below is the
automation example of Momax Bright IoT Lamp:
Turn on desk lamp at 6:00am
Instructions below explain how to create an Automation:
1. In “Smart Action” under the page
of “Automation”, tap “+” to add
new Automation, and then tap
“Add Condition”
3. Set the time at 6:00am
2. Tap “Schedule”
17
4. Tap “Add Action”
5. Select related device and
then tap “On” in power.
6. Save to complete.
18
7. In the page of automation, you
can enable or disable
automation
19
Device Information
• Page Layout
Device Name
(tap to change)
Wi-Fi Signal Strength
Remove Device
Device ID
IP Address
Mac Address
Firmware Information
20
• Check for Firmware Upgrade
Tap “Check for Firmware Upgrade”, you can see current firmware
version and available upgrade version if any. Tap “Upgrade” to start
firmware upgrade.
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
HKBN QL6SUKW is a smart lamp with wireless charging capabilities that lets you adjust brightness, color temperature, and scenes through the HKBN Home app. With Cantonese voice controls, you can use Siri shortcuts on specified iOS devices to operate the lamp. Create automations to turn on the lamp at specific times or when certain conditions are met, like when you enter the room. The lamp also features a countdown timer and various scene modes for different occasions, such as movie time, reading, or welcome home.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Lumary 4 Inch Smart Recessed Lighting User manual
-
Momax SL3S User manual
-
Feit Alexa / Siri / Google Assistant Owner's manual
-
Feit OM60/RGBW/CA/AG/3 User manual
-
Feit Electric App Flood Light Security Camera User manual
-
Feit Electric PLUG/WIFI/WP/3 User manual
-
CREE LIGHTING CMST19-60W-AL-9TW-GL User manual
-
Feit Electric PLUG/WIFI/WP/3 User manual
-
Nokia G-240WZ-A User manual
-
Mean Well PWM-120-12BLE User manual
