Thank you for purchasing this product. This manual provides more information
about the floor lamp, please read it carefully before use for
convenience and keep the manual properly.
INSTRUCTION MANUAL
① Lamp body×3
② USB interface×1
③ Lamp base×1
④instruction manual×1
Install according to the drawing sequence, press
down to ensure the notch is aligned and the lamp
body is clamped in place
Download the app by scanning the QR code on the left, search
and connect to the floor lamp, and easily turn on a variety of lighting
modes.
1. Do not place it next to high-temperature objects or in wet places;
2. Do not place the lamp on an uneven surface or inclined ground;
3. When there is dirt on the surface of the lamp, please wipe it with a damp cloth and dry
it with a dry cloth;
4. Please operate according to the instructions.
Cut off the power supply before maintaining the lamps to prevent electric shock!
Items:
Model No.
Product size
Packing Size
Gross weight
Product weight
Power supply
DC voltage
Rhythm Floor Lamp
FR-S1177
15*10*122.3cm
45.5*20*5.5cm
635g
862g
USB
5V
Adjust
Click the color block
or slide the color ring
to adjust the
corresponding
light color.
Open“Magic Lantern”, and
click Button“ALLOW”on the
pop-up dialog box
Click the Settings button and click the
button "Auto Connect". And make sure
it is on, wait 5 seconds, APP
canconnect to the floor lamp.
Music MicTimer
Style
Swipe the screen
up and down to
switch different
lighting modes.
Turn on the music
mode and the lights
change
with the music.
Click to select the
music in the APP,
you can also choose
other music freely.
The APP can be
used to control the
timing of lights on
and off.
Click Time to select
the time.
When there are
sounds around, the
color of the
light changes with
the volume of the
sound.
Changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment. This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Statement
To maintain compliance with FCC's RF Exposure guidelines, This equipment should be installed and
operated with minimum distance of 20cm the radiator your body. This device and its antenna(s) must not
be co-located or operation in conjunction with any other antenna or transmitter.
1
NINGBO STAR SL273 Operating instructions
Neon IP65 Waterproof Strip Light User manual
Dr Prepare DCH02WF User manual
APPS Magic Lantern APP User manual
LG 37LK435C User guide
PyleHome PDIC56 Owner's manual
Gateway Plastic Hardware Lighting J56963 User manual
HUGOAI Smart Table Lamp User manual
