LIGHTING THE WAY FOR SIXTY YEARS
WARNING:
Electrical Danger
Turn Power Off
You will need 2- Candelabra Base Bulb
40 Watts recommended 60 Watts Max.
USE LED BULBS FOR EXTENDED USE
All electrical components must be
installed by a licensed electrician
in accordance with the National
Electric Code and the appropriate
The fixture is Dry rated
A. 20Sets. (1)28mm + (1)26mm +
(1)20mm + (1)14mm
Crystal Sets
WARNING:This product can expose you to Lead,
which is known to the State of California to cause cancer
and/or birth defects or reproductive harm.For more
information go to www.p65warnings.ca.gov
HOW TO INSTALL:
Place the fixture parts on a soft
cloth-covered platform before
installation of fixture.
1. Install the mounting bar onto the
outlet box.
5. Dress the crystals as illustrated.
4. Adjust the hex nut along the bottom end of
the center stem to allow the vase cap to
stay in the correct position.
Secure the cap with the finial.
Crystorama.com
2. Raise the Frame up over the threaded nipple
on the mounting bar.
After the wire connection is completed,
Secure with the coupling.
3. Screw the center stem onto the coupling
and secure with the nut.
local electrical codes.
