QUESTIONS? GIVE US A CALL! 1-855-478-5538
PAGE 1
V1
RukketSports
V1
4. After inserting the main shaft, unroll the net until the net is fully
unrolled, and then insert another white plastic tube at a suitable position.
As you did in Step #2, also ensure the top of the tube is slightly angled
away from the driveway. Then, insert the other end of the net into the
plastic tube. Now your net should be taught and ready for use.
Our video instructions provide the best guidance for setting up your Driveway Guard Retractable Barricade Net
They can be viewed online at
DrIveway Guard Retractable BarrIcade Net
SET-UP INSTRUCTIONS
2. Place the plastic pipe with the
black plastic cap facing down, on the
grass. The top of the tube should be
slightly angled away from the
driveway. Place a piece of wood or
cardboard over the tube and use a
hammer to drive it all the way into
the ground. Note: In order to ensure
safety and avoid hitting this with
your mower, make sure to drive it
ush with the ground.
1. Spread accessories of the
product on the ground. Lay
the net assembly on the
ground with the black net
facing up.
3. Insert the steel pipe of the
main axis of the driveway net
assembly into the plastic pipe
in the ground rst. The plastic
pipe is to protect the iron
pipe from corrosion, and
makes it easy to place the
assembly into the ground
and remove it.