JAZAVA 2053-IR-SR Installation guide

1. Fasten the crossbar to the outlet box with two outlet box screws.

2. Connect the black to black (power), white to white (neutral) and brass wire to ground wire with

supplied wire connectors.Tuck all wires into outlet box.

3. Mount the canopy onto the mounting bracket and secure it with the canopy screws.

4. Adjust the appropriate height by pressing the elevator (a) up and down the active wire (b)

with the tool or thumb.

N(White)

Ground wire

Junction box

(not included)

L(Black)

Note: this product is suitable for dimming switch

Brand Model Brand Model

Lutron

CTCL-153P

MACL-153M

DVCL-153P

TGCL-153P

Lutron PD-6WCL

Leviton 6672-1L

Installation Instructions

Instructions d’installation

ITEM NO:P2022051

P2022052

P2022053

WARNING - ATTENTION

Luminaires must be installed by a certified electrician. Check with local and national codes for proper installation.

To prevent electrical shock, disconnect electrical supply before installation or servicing.

Les luminaires doivent être installés par un électricien certifié. Vérifier les normes et les codes du bâtiment de votre région.

Pour réduire les risques d’électrocution lors de l’installation ou de l’entretien, couper l’alimentation électrique.

This manual is also suitable for

Download PDF