2. FUFU GAGA
  3. LJY-KF260075-02
LJY-KF260075-02

FUFU GAGA LJY-KF260075-02 Installation guide

  • I have reviewed the user manual for the Dresser. This document provides detailed assembly instructions, safety warnings about tipping, and maintenance guidelines. I'm here to help answer any specific questions you may have about using this product, so feel free to ask away.
  • What should I do to prevent scratches during assembly?
    How often should I re-tighten the screws?
    What should I use to clean the frame of the product?
Dresser
Version:01/02/2023 1/19
please read the entire manual before starting to assemble
and/or using this product.follow the manual thoroughly and
keep it for further reference.
IMPORTANT INFORMATION!
It is important that any product which is assembled using any kind of screw is re-tightened
2 weeks after assembly,and once every 3 months - in order to assure stability through-out
the lifespan of the product.
For regular maintenance and cleaning of the product, for the frame, please use a rag dipped
in neutral detergent to fully wipe it, and then dry it with a clean rag.For glass materials, wipe
with a rag dampened with water glass cleaner, and then dry with a dry rag.
Do not use an electric screwdriver, and do not use too much force when installing, because
the board is easy to break.
IMPORTANT !
Overturned furniture can cause serious or fatal crush injuries. To prevent tipping over, be sure
to use the wall attachment, if not included with this product. Please purchase the wall
attachment that fit your wall. If unsure, seek professional advice. Please read and follow each
step of the instructions carefully.
ANTI-TOPPLE WARNING !
Try to find a partner to install
with you, which can speed up
the installation efficiency and
shorten the time.
IMPROVE EFFICIENCY !
In order to avoid scratching this
furnuture should be assembled
on a soft layer-could be a rug.
AVOID SCRATCHES!
2/19
3/19
When installing, please carefully confirm whether
each screw corresponds to the manual, accessories
with similar shapes can be distinguished by size
Please prepare the following tools
6x35mm
H x 2J x 2
B x 77A x 77
14x9mm
G x 26
4x30mm
D x 36
6x30mm 4x16mm
F x 50
E x 12
300mm
4/19
x3
x3
This is a permanent label.
Do not remove!
ALWAYS install tipover restraint
provided.
NEVER put a TV on this product.
NEVER allow children to stand,climb
or hang on drawers,doors,or shelves.
NEVER open more than one drawer
at a time.
Place heaviest items in the lowest
drawers.
All screw holes of this item
have be pre-drilled.
Please use hardware compo-
nents in the correct reserved
holes according to the figure
and written instruction.
Do not drill holes by yourself.
5/19
When installing, please carefully confirm whether
each screw corresponds to the manual, accessories
with similar shapes can be distinguished by size
Please prepare the following tools
x 3x 1 x 1
x 1 x 1
x 1 x 3
x 6 x 2 x 3 x 3x 3
x 6 x 6 x 6 x 6x 3
6/19
1
A x 6
6x35mm
2
IIIIII
A
A
x2
A
A
B
B
B
B
B
B
B
A
14x9mm
B x 6
Connect plate 9 with plate 10, put cam
lock(B) into holes in plate 10 and turn
Insert quickfit screw(A) into plate 9(x2)
with a screwdriver as shown.
clockwise to tighten as shown.
A x 11
6x35mm
IIIIII
3
7/19
4
A
A
A
AA
A
A
A
A
A
A
A
B
B
B
B
B
A
14x9mm
B x 11
Attach the component to plate 4,
put cam lock(B) into holes in
plate 9,10 and turn clockwise to
Insert quickfit screw(A) into plate 4 with
a screwdriver as shown.
tighten as shown.
A x 6
6x35mm
8/19
5
6
x3
A
A
A
A
A
A
A
E
E E
EE
E
E
F
F
F
F
F
F
F
F
F
F F F
E x 12
300mm 4x16mm
F x 24
Separate glide into two parts at first.
Fix the slide rail(E) to all plate 5,7
Flip plate 4, and insert quickfit screw(A)
into corresponding holes as shown.
and 6 using screw(F) as shown.
IIIIII
8
A x 6
6x35mm
9/19
7
IIIIII
B
D
D
D
A
A
A
A
A
A
A
D
DD
B
B
B
B
B
D x 6
6x30mm14x9mm
B x 6
D
A
B
Attach plate 5,6 and 7 to plate 4 with
wooden dowel(D) at first.
Put cam lock(B) into holes in plate 5,6,7
and turn clockwise to tighten as shown.
Insert quickfit screw(A) into plate 3
with a screwdriver as shown.
IIIIII
10
A x 6
6x35mm
10/19
9
IIIIII
DBB
B
B
B
B
B
A
D
D
D
D
DD
A
A
A
A
A
A
A
D x 6
6x30mm
14x9mm
B x 6
Slide plate 8 along grooves as shown.
Attach plate 3 to plate 5,6 and 7 with
wooden dowel(D) at first.
Put cam lock(B) into holes in plate 5,6,7
and turn clockwise to tighten as shown.
Insert quickfit screw(A) into plate 3 with
a screwdriver as shown.
IIIIII
12
A x 6
6x35mm
11/19
11
IIIIII
D
D
D
D
B
B
BB
B
B
B
A
A
A
A
A
A
A
A
D
D
D
D x 6
6x30mm
14x9mm
B x 6
Attach plate 5,6 and 7 to plate 3 with
wooden dowel(D) at first.
Put cam lock(B) into holes in plate 5,6,7
and turn clockwise to tighten as shown.
Insert quickfit screw(A) into plate 2
with a screwdriver as shown.
12/19
13
IIIIII
14
A x 6
6x35mm
D
D
D
D
D
DB
B
B
B
B
B
B
A
A
A
A
A
A
A
D x 6
6x30mm
D
14x9mm
B x 6
Slide plate 8 along grooves as shown.
Attach plate 2 to plate 5,6 and 7 with
wooden dowel(D) at first.
Put cam lock(B) into holes in plate 5,6,7
and turn clockwise to
tighten as shown.
Insert quickfit screw(A) into A
plate 2 with a screwdriver
as shown.
16
A x 6
6x35mm
13/19
IIIIII
15
D
D
D
D
D
D
B
B
B
B
B
A
A
A
A
A
A
A
B
D x 6
6x30mm
14x9mm
B x 6
D
A
B
Attach plate 5,6 and 7 to plate 2 with
wooden dowel(D) at first.
Put cam lock(B) into holes in plate 5,6,7
and turn clockwise to tighten as shown.
Insert quickfit screw(A) into plate 1 with
a screwdriver as shown.
IIIIII
14/19
17
18
B
B
B
B
B
D
D
D
D
D
D
B
B
A
D
G
G
G
G
G
G
D x 6
6x30mm
G x 24
4x30mm
x6
14x9mm
B x 6
Slide plate 8 along grooves as shown.
Cover plate 1 to plate 5,6 and 7 with
wooden dowel(D) at first.
Put cam lock(B) into holes in plate 5,6,7
and turn clockwise to
tighten as shown.
Fix plate 13 and 14 with plate 15
using screw(G) as shown.
15/19
19
AA
B
B
B
B
B
B
E
E
E
E
E
E
F
F
E
F F
F
F
F
F
B
B
B
BA
A
AA
AA
AA
14x9mm
Bx 24
A x 24
6x35mm
E x 12
300mm 4x16mm
F x 24
x3
x3
x3
Slide plate 16 along grooves as shown.
Attach plate 11/12 to plate 13 and 14,
put cam lock(B) into holes in plate 13,
14 and turn clockwise to tighten as shown.
Fix runner(E) to
plate 13 and 14
using screw(F)
Insert quickfit screw(A) into
plate 11(x3) and 12(x3)
with a screwdriver as shown.
as shown.
21
16/19
20
H
H
H
F
FF
E
F x 2 H x 2
4x16mm
Align rails, slide all drawers to
corresponding positions.
Fix cloth trip(H) to back of the item
using screw(F) as shown.
17/19
22
G
G
Wall
H
H
J
J
G x 2 J x 2
4x30mm
G
H
J
Install anti-tipping device as shown.
WARRANTY CLAIMS
•There is a 30-day warranty for broken furniture or any other problems that do not
work properly. The warranty will start from the date of purchase which must be
verified by proof of purchase.
•Before making a claim, we may be able to answer your query, simply call us. Please
leave your purchase order number, along with some details of the problem, if you
want a replacement part. We will arrange within 48 hours. If there is out of stock,
we will reply with a shipping date.
•The product must be used in accordance with the instructions provided. For health
reasons.
•For other reasons, if the furniture needs to be returned, it must be cleaned and dried
and operated within 30 days of receipt.
Type of Warranty Claim
•Failure to follow the furniture instructions will invalidate the warranty. Attention please.
•Does not include damage during installation, but includes damage during transportation.
Scope of responsibility
•Shall not bear any responsibility for misuse or user damage and / or loss of parts during
the installation of furniture.
•After using, the damage and scratches of the furniture are not covered by the warranty.
The Warranty Relates to All Bought in The Us and Covers The
Following Areas
•Sheet parts: 1 month from the date of purchase.
•Electrical parts: 1 month from the date of purchase.
WARRANTY
18/19
CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM?
PLEASE FOLLOW THE BELOW INSTRUCTIONS:
•If you have purchased and have simply changed your mind, follow the retailer’s
instructions for returns.
DEFECTIVE ITEMS
•If your item is defective in any way, i.e. it doesn’t work but you can’t identify why, in
the first instance, please call us.
DAMAGED ITEMS
•If you receive an order with obvious shipping damage from the retailer, then we suggest
the delivery is refused. If the delivery has been accepted and then shipping damage is
found, please follow the specific instructions advised by the retailer.
In all circumstances please save all packaging material and paperwork for the order.
Please be aware that if you dispose of packaging material or attempt to return the
merchandise without contacting the fulfiller, you jeopardise your chances of making a
claim, and you may not receive a credit for the return.
RETURNS
19/19
/