2. OCPTY
  3. Power Adjusted Heated Towing Mirror
Power Adjusted Heated Towing Mirror

OCPTY Power Adjusted Heated Towing Mirror Installation guide

  • Hello! I've reviewed the user manual for the OCPTY Towing Mirrors. This document provides detailed steps on how to remove the old mirror, install the new mirror, and troubleshoot in case the mirror isn't working properly. I'm ready to address specific questions you may have about the installation, functionality or other points mentioned in this document.
  • What could be the reason why it cannot be used normally after installation?
    What should I do if I am not satisfied with the mirror after receiving the goods?
    What points should I note before purchase and installation?
How are the towing mirrors installed?
Installation Steps:
Step1: First of all we need remove the door trim there are two screws on the
door card,one screw behind the door handle panel and also one screw in the door
handle,there after removing the two screws remove the top cover and putting
your hands underneath the door trim and giving it a nice pull to remove it.
1 2
Step2: Remove the worn-out towing mirror. First unplug the electrical connector
and then remove the three bolts. After the screws are loosened, remove the
towing mirror.
1 2
Step3: Start to install the new towing mirror. Before installing, install the three
studs to the bottom of the mirror. After fixing the three studs, choose the correct
position to install the mirror on the door. Make sure that the studs are aligned with
the nuts and then tighten the screws.
1 2
Step4: After making sure that the three nuts are fixed, connect the connector
and the towing mirror adapter together, and then install the door trim and top
cover.
1 2 3
What could be the reason why it cannot be used normally after
installation?
The year, brand and model of the new towing mirrors does not match your
original.
Wiring error occurred during installation.
The mirror itself collided during transportation, causing some functions to be
damaged.
The solution to the towing mirror not being used normally?
Please check if the year, make, model of our towing mirrors are matched with your
original ones; if matched, secondly check the towing mirror functions listed on our
listings are consistent with what you want.
Check if the wiring diagram is properly connected or incorrectly
connected,reconnect it and try it again.And you can email us for a new wiring
diagram, because the previous wiring diagram may be old.
You can check which part is damaged. If the lens or small bulb is damaged, you can
contact our customer service and we will send you new accessories.
Points to note before purchase and installation?
Please check the year, make, model and functions of our towing mirrors are
matched with your original ones;You can enter your make, model, and year
into the list to check whether our products are compatible with your car.
These two are compatible and incompatible states:
Follow the correct installation steps to install, and you can also search for
related installation videos on the YouTube website. There are very detailed
installation steps explained.
What should I do if I am not satisfied with the mirror after
receiving the goods?
If you are not satisfied after receiving the goods, you can contact our customer
service in time and tell us the reason for your dissatisfaction, and we will try our
best to give you a solution. For example, if the product is slightly damaged or the
accessories are lost, we will send you a new one. In short, we will try our best to
provide you with the best solution.
Finally, if you are asking for a full refund, it must be received brand new and
unused, or if the product is so damaged that it is truly unusable.
/