VEVOR 4 Color 1 Station Silk Screen Printing Press Machine User manual

Brand: VEVOR

Model: 4 Color 1 Station Silk Screen Printing Press Machine

Type: User manual

VEVOR 4 Color 1 Station Silk Screen Printing Press Machine allows you to print on various materials like fabric, paper, plastic, and wood. Its adjustable double-spring devices accommodate different screen frame weights. This durable and easy-to-clean machine features an all-metal construction with advanced electrostatic spraying and electroplating.

ASSEMBLY INSTRUCTIONS

PRINTING PRESS WITH

REMOVABLE PALLET

E-mail: CustomerSeice@vevor.com

Be sure to review the contents of this manual before attempting to operate the equipment.

This manual should be located where all machine users can easily reference it.

IMPORTANT :

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

4 COLOR 1 STATION SILK SCREEN PRINTING

PRESS MACHINE HEAVY DUTY DIY

INTRODUCTION

CustomerSe[email protected]

4COLOR 1 STATION

Platen size: 21.7x17.7 inch

Package size: 24x20x11 inch

• Adjustable double-spring devices are available for screen frames

of dierent weight.

• Table type and combinatorial design saves place and convenient

for transpoation.

• This silk screen printing machine feaures all-metal construction,

advanced electrostatic spraying, and electroplating, durable and

easy to clean body.

This screen printing machine can be applied to costume, woven fabric, metal,

paper, copybook, plastic, wood, glass, ceramic, leather, and other products

which need at printing.

PACKING CONDITION

CB D

EF G

Main frame Locator

Fixed screen plate c-groove

Arm T-tube Workbench link pipe

High density silk screen plate

Link board d-sleeve

6 lifting nut

Kp000

10 × 30mm

8 × 25mm

6 × 16mm

No. 6 nut

4 × 14mm

No. 8 nut

Flower orchid no. 5

Spring

10 × 50mm

To screw accessories

To screw

To screw accessories

8 × 16mm

10 × 25mm

8 × 50mm

No. 8 gasket

No. 10 gasket

14-17mm wrench

14mm wrench

No. 10 nut

6 wrench

2.5 wrench

11 12 13

21 24

When connecting, screw the

following screw to the fahest end

of the stroke, and stretch the

tension spring for a long distance

to hook it

Pay attention to the direction

and install according to the

schematic diagram

Step 2

Connection between

pa C and Pa D

Pas C and D are connected to the

main engine

Tighten with 2.5 wrench

Fix with a 6mm

wrench

Step 1

Fixed with the hole position corresponding to the

high-density screen printing plate

Do not screw to the lowest stroke. Otherwise, it

will not pass through the workbench link pipe.

Step 3

After the high-density silk screen printing board

and the D-shaped sleeve of the link board are

installed, pass them through the appropriate

position of the link pipe of the workbench

according to the schematic diagram, and ﬁnally

tighten the screws at the bottom to prevent

shaking

Move the gasket in the direction of the arrow and ﬁx the screw on the mating

nut .

For other three groups of

units, please repeat step 1

and 2 until the installation is

complete

Step 4

VEVOR 4 Color 1 Station Silk Screen Printing Press Machine User manual

VEVOR 4 Color 1 Station Silk Screen Printing Press Machine User manual

VEVOR 4 Color 1 Station Silk Screen Printing Press Machine User manual

Related papers

Other documents