2. SmartWitness
  3. KP2
KP2

SmartWitness KP2 Installation guide

  • Hello! I am an AI chatbot trained to assist you with the SmartWitness KP2 Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
3. Watch the installation video. 2. Scan the QR code inside the box
for a detailed installation video, spec
sheet and user guide.
5. Remove backing. Press evenly
to ensure adhesive is flush against
the glass. Hold unit to window for
30 seconds.
8. Connect KP2 bracket cable to
your preferred power adapter. For
this install, let’s use an OBDII.*
6. Remove adhesive and apply cable
clips to windshield. Slide the bracket
power cable into clips.
7. Tuck cable behind weather stripping,
and push stripping in to secure it.
Proceed to next page for device calibration >
12. Open the KP2 installation app, and
scan the IMEI code on the box’s label.
10. Turn on your vehicle. Check
that both blue and green lights
remain on after 5 minutes. If not,
an error occurred.
13. Follow the device configuration
prompts to complete the installation
app.
1. Review the package contents.
Standard Kit includes:
QUICK START INSTALLATION GUIDE
FOR KP2 VIDEO TELEMATICS CAMERA
A.
B.
C.
9. Plug the end of the OBDII adapter
cable* into your vehicle’s OBDII port.
11. Scan the QR code above, and
download the iOS or Android KP2
installation app.
4. Ensure there are no chips or cracks
in windshield. Use wipe to clean the
window. Allow time to dry. Remove
any film left over from solution.
D.
E.
F.
A. KP2 Camera
B. Windshield Mounting
Bracket & 3M™
Adhesive Tape
C. Alcohol Pads
D. Clips
E. Torx® Wrench
F. 8" 3-Wire Adapter Cable
(Connects to A, see Pro
Install Guide for details)
Use the appropriate QR code to
download the KP2 Installation App
*OBDII Adapter Cable Sold Separately
OBDII Adapter Cable Sold
Separately (Connects to A)
QUICK START INSTALLATION GUIDE
FOR KP2 VIDEO TELEMATICS CAMERA
© 2022 SmartWitness. All Rights Reserved. smartwitness.com | (312) 981-8774
14. Ensure the IMEI code in the
app matches your device’s IMEI.
If there isn’t a match, click No and
contact SmartWitness Support.
If there’s a match, click Yes
to continue.
17. If you adjust either camera, click
Refresh Images to update road- and
driver-facing camera images.
Use the arrows to adjust your vehicle’s
“Horizon” and “Hood” lines.
Ensure your “Hood” line is in the
bottom one-fourth of your image.
Scroll down and click Next to save
the “Horizon” and “Hood” lines.
20. After you’ve made changes
and activated the appropriate
features, click Confirm to save
your configuration.
15. Read the instructions
to understand more about
your vehicle’s “Horizon” and
“Hood” lines.
Click Show Me How for a
brief video walk-through
of the device attachment
process.
18. Choose preferences for
in-cabin alerts, an alert’s volume
level or activation of dierent
ADAS and DSM events.
21. On the home screen, you’ll
see a success message validating
your saved configuration.
16. Select your KP2 camera
configuration.
Choose the driver’s side of the
vehicle (from the perspective
of the front of the vehicle).
Click Next to set your vehicle’s
“Horizon” and “Hood” lines.
19. If you’re unaware of a
setting’s function, click the
info icon to learn more.
Congratulations!
Your KP2 is now
ready to go!
/