ML-58331_V1Made in China
www.typesauto.com
2975 Red Hill Ave., Ste. 100,
Costa Mesa, CA 92626
1.866.294.9244 | [email protected]
©2021 Type S. All rights reserved.
A Horizon Brands Company
WARNING: This product is intended solely for
decorative purposes. Check local laws and
regulations regarding installation and use.
Manufacturer and seller assume no liability for
improper installation or use, which are solely the
responsibility of the purchaser.
• Unpack and identify your new TYPE S shift knob
components
• Remove the shift knob's lower collar and slide
over gear stick shift
• Fasten the new inner collar to the top of the
stick shift using the correct sized sleeve supplied
(if needed) and firmly tighten the set screw with
the allen wrench provided
• Now that the inner collar is securely attached to
the stick shift, screw the TYPE S shift knob onto
the inner collar and tighten
• Finally, screw the lower collar onto the TYPE S
shift knob and tighten
• Check for tightness after driving 50 miles
Shift Knob
Inner
Collar
Set Screw
Allen
Wrench
Model number: AC58331
SHIFT KNOB
Fully Loaded
Installation and Use Instructions
Before you start :
Please note this shift knob is for threaded shifter sticks.
How to install the shift knob:
Quick Installation Guide
Sleeve
Lower Collar
Gear Stick Shift
117W x 130H mm
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
TypeS AC58332 User guide
-
KTM 250 SX-F 2006 User manual
-
Kawasaki 1400GTR ABS - 2011 User manual
-
-
Volkswagen Golf 2015, Golf Variant 2015 User manual
-
-
-
-
HUSABERG FS 450e/6 User manual
-
