Knightsbridge XT468 User manual

XT468
Knightsbridge
Brand
Knightsbridge
Model
XT468
Category
Cable network testers
Type
User manual

Knightsbridge XT468 is a network cable tester that can locate short circuits, open circuits, and wrong connections in RJ45, RJ11, and RJ12 cables. It features dual speed for testing and can confirm the connection and pinout status of cables. The tester comes with a remote unit for easy testing and has LED indicators to display the test results. It's ideal for testing network cables and ensuring proper connectivity in various applications.

Knightsbridge XT468 is a network cable tester that can locate short circuits, open circuits, and wrong connections in RJ45, RJ11, and RJ12 cables. It features dual speed for testing and can confirm the connection and pinout status of cables. The tester comes with a remote unit for easy testing and has LED indicators to display the test results. It's ideal for testing network cables and ensuring proper connectivity in various applications.

1
78
INSTALLATION & MAINTENANCE MANUAL
XT468 Network Cable Tester
XT468 Network Cable Tester INSTRUCTIONS_SPREADS.indd 1 04/07/2017 14:10
2
These instructions should be read carefully and retained after use for further reference and
maintenance.
The Knightsbridge remote network cable tester will locate short circuit, open circuit and wrong
connections using the attached remote. Confirms connection and pin out status on RJ45 basted
systems like CAT5e and CAT6. Also covers UTP, FTP and RJ11/RJ12. Dual speed for testing.
GENERAL INSTRUCTIONS
CABLE TEST
Pin No. Conductor colour
1 white and orange
2 orange
3 white and green
4 blue
5 white and blue
6 green
7 white and brown
8 brown
Pin No. Conductor colour
1 white and green
2 green
3 white and orange
4 blue
5 white and blue
6 orange
7 white and brown
8 brown
T568B RJ45 T568A RJ45
XT468 Network Cable Tester INSTRUCTIONS_SPREADS.indd 2 04/07/2017 14:10
This product will test:
• RJ45 to RJ45
• RJ45 to RJ11/RJ12
• RJ11/RJ12 to RJ11/RJ12
• To operate: remove battery cover and insert 9V battery (not supplied). Replace battery cover and
switch on the power on the main tester
• Connect cable you wish to test to either the RJ45 socket or RJ11/RJ12 socket on the main unit
• Connect the other end of the cable to the matching socket on the smaller unit
• If correctly wired, lights from 1-8 for RJ45 or lights 1-6 for RJ11 & RJ12 will light up green on both
units in sequence
• If incorrectly wired, lights from 1-8 for RJ45 or lights 1-6 for RJ11 & RJ12 will light up red indicating
an opposite connection has been detected
• If no lights activate there is a break in the cable
OPERATION PROCEDURE
3
RJ11
RJ12
Pin No. Conductor colour
1
2 Black
3 Red
4 Green
5 Yellow
6
Pin No. Conductor colour
1 White
2 Black
3 Red
4 Green
5 Yellow
6 Blue
XT468 Network Cable Tester INSTRUCTIONS_SPREADS.indd 3 04/07/2017 14:10
4
ML Accessories Limited
LU5 5TA
www.mlaccessories.co.uk AKJUN17_v2
This cable tester cannot test energised products
• If pin activity lights appear weak, change the battery (9V Battery)
• Testing cannot be verified if connector ends are not fully inserted into the units
• Always ensure you use quality tools to crimp connections
• This cable tester is for use with RJ45, RJ11/RJ12 connectors only
This product has a warranty of 1 year from date of purchase. Failure to install this product in
accordance with the current edition of the IEE Wiring Regulations, improper use, or removal of
the batch codes will invalidate the warranty. If this product should fail within its warranty period it
should be returned to the place of purchase for a free of charge replacement. ML Accessories does
not accept responsibility for any installation costs associated with the replacement product. Your
statutory rights are not affected. ML Accessories reserve the right to alter product specification
without prior notice.
WARNING
WARRANTY
XT468 Network Cable Tester INSTRUCTIONS_SPREADS.indd 4 04/07/2017 14:10
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Knightsbridge XT468 User manual

XT468
Knightsbridge
Brand
Knightsbridge
Model
XT468
Category
Cable network testers
Type
User manual

Knightsbridge XT468 is a network cable tester that can locate short circuits, open circuits, and wrong connections in RJ45, RJ11, and RJ12 cables. It features dual speed for testing and can confirm the connection and pinout status of cables. The tester comes with a remote unit for easy testing and has LED indicators to display the test results. It's ideal for testing network cables and ensuring proper connectivity in various applications.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents