2. MULTISPAN
  3. MS-5716_R_1812

MULTISPAN MS-5716_R_1812 Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the MULTISPAN MS-5716_R_1812 Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
ProductManual
MultispanControlInstrumentsPvtLtd
72/B,Phase1,GIDCEstate,Vatva,Ahmedabad-382445,Gujarat,India.
+91-79-40029250 +91-9978991471
MS-5716R
16ChannelScanner
www.multispanindia.com
[email protected]
www.multispanindia.com
MS-5716R
Page-1
www.multispanindia.com
MS-5716R
ProductInception
Parameter Lock Key Auto / Manual Channel
Scrolling Key
High / Trip Alarm
Indication LED
Scroll / Hold
Channel
Indication
Model Number
Parameter Lock
Indication
Low / High Alarm
Indication LED
Enter Key
Right Shift Key
Down Key
Left Shift Key
SET Key
UP Key
Communication Key
*
*
*
*
**
*
*
*
*
*
*
*
*
www.multispanindia.com
MS-5716R
Page-2
TechnicalSpecification
UPPER:4Digit7seg0.70”, LEDDisplayRED
LOWER:4Digit7seg0.50”, LEDDisplayGREEN
Output
PowerSupply
Operating
Temperature
Relative
Humidity
100to250VAC,50/60Hz,Approx10VA
-999To9999
}
Analoginput Range
0-10VDC
0-20mADC
4-20mADC
PT-100/3W-99to400℃
PT.1/3W-99.0to400.0℃
Thermocouple RTD
0To55℃
Upto95%RHNonCondensing
Model
Display
Size(mm)
PanelCutout
Inputsand
Range
192(H)X96(W)X140(D)mm
188X92mm
MS-5716R
J0to600℃
K0to1200℃
8Relay,(NO-C)1C/O5A@230VAC.

Note:-1C/O5A@230VACforresistiveload.
Procedure
1)Doallconnectionsasperthewiringdiagram.
ToConfigure:1.InputSelection(J,K,PT-100,PT.1,0-10VDC,0-20mADC&4-20mADC).
2.Relaymode
If1Relaypergroup-If2Relaypergroup
LOWLOW/HIGH
HIGHHIGH/TRIP
HIGH/LOW
3.Setpointselection.
4.Analograngeselection.
5.OffsetandCorrectionfactorselection.
2)Toaddoffset&correctionfactor,press+keystogether.
Setoffsetforeachchannelifrequired.
Offsetrangewillbe±25℃forJ,K,PT-100temperatureinput.
Offsetrangewillbe±25.0℃forPT.1temperatureinput.
Offsetrangewillbe-999to999foranaloginput.
Correctionfactorrangewillbe-999to999onlyforanaloginput.
4)Presskeyforcontinuousscrollingormanualscrolling.
5)InHoldmodeuse&keytoselectnextchannel.
6)Ifkeyispressedthen,userwillonlybeabletoviewalltheparametersvalues,butwould
notbeabletochangeanyoftheparameters.
www.multispanindia.com
MS-5716R
Page-3
(Repeatthesameprocedureforall16channels).
Scantime.(SECOND)
Press+key.
Presskey.
Presskey.
Presskey.
Presskey.
Presskey.
UseorkeytoSkiporUnskipChannel.
SET
05
J-TY
UNS
SCN
CH 1
CH 1
J-TY
Ch16
1
S 1P
S 1P
/
/
TochangetheInputType,PressorKey.
(J,K,PT-100,PT.1,0-10VDC,0-20mADC&4-20mADC).
(Repeatthesameprocedureforall16channels).
h
UNS
Ch16
1
h
h
h
Presskeytosave&exit.
ENT
InputSelection
MENU-1
Note:-Valuescanbechanged
bypressingorkeys.
www.multispanindia.com
MS-5716R
Page-4
MENU-2
MENU-3
Presskeytosave&exit.
Presskeytogotonextparameter.
Presskeytoselectrelayoutput.
Presskeytonextgroup(ifrelayexist).
Press+key.
SETSET
SET
SET
SET
Setyesornoforchannelbypressingorkey.
Setrelayoutput.

Setrelayoutput.

Ifselect1relay. Ifselect2relay.
Low


High



HighandLow.

Lowandhigh.


HighandTrip.


bypressorkey.

bypressorkey.
rp1
g
OUT
RLY1 RLY2
01YS 01nO
1 RLY
1 LOW 2 HNT
L O
H I
H n L
L n H
H n T
/
Presskey.
SETSET
Presskey.
SETSET
Presskey.
SETSET
Presskey.
SETSET
Presskey.
SETSET
Presskey.
SETSET
Presskey.
SETSET
Presskeytosave&exit.
Low/Highsetpoint-1
Low/HighsetpointforGroup8,
High/TripsetpointforGroup1,
High/TripsetpointforGroup8,
Hysteresis-1
300
100
300
5
5
H5-1
L5-8
H5-8
Hy1
Hy8
(Repeatthesameprocedureforall16group).
(Repeatthesameprocedureforall8Hysteresis)
100
L5-1
RelayMode
SetpointSelection
Note:-Valuescanbechanged
bypressingorkeys.
www.multispanindia.com
MS-5716R
Page-5
DP
ANLg
Lr-1
Lr16
Hr01
Hr16
00.00
SET
00.00
00.00
00.00
00.00
Press+key.
SET
Presskeytosave&exit.
DP(DecimalPoint)isCommonforallchannels.
Positioncanbechangedbypressingorkeys.
ENT
MENU-4
NOTE:
(Repeatthesameprocedureforall16channels).
(Repeatthesameprocedureforall16channels).
DecimalPoint.
Analog
set
Lowrangechannel1.
Highrangechannel1.
Presskey.
Presskey.
Presskey.
Presskey.
Presskey.
AnalogRangeselection
Note:-Valuescanbechanged
bypressingorkeys.
Presskey.
www.multispanindia.com
MS-5716R
Page-6
(Repeatthesameprocedureforall16channels).
(Repeatthesameprocedureforall16channels).
Press+keytochangeoffset.
Offsetforchannel1.
Correctionfactorforchannel1.
Offset
DisplayShowsCorrectionfactorparametersetting.
Presskey.
Presskey.
Presskey.
Presskey.
Presskey.
Of 1
Of16
Ofst
CRFC
Cf01
Cf16
00.00
00.00
SET
SET
00.00
00.00
MENU-5
OffsetandCorrectionfactorselection
Presskeytosave&exit.
ENT
Note:-Valuescanbechanged
bypressingorkeys.
www.multispanindia.com
MS-5716R
Page-7
TerminalDiagram
C

I

D

J

E

K

F

L

12
11
10
1 2 3456 7 8 9
24
13 14 15 16 17 18 19 20 21 22 23
A

G

B

H

NO
NO
NO
NO
NO
NO
Relay-1
Relay-4
Relay-2
Relay-5
Relay-3
Relay-6
C
C
C
C
C
C
O

U

P

V

Q

W

R

X

35 36
37 38 39 40 41 42 43 44 45 46 47 48
25 26 27 28 29 30 31 32 33 34
M

S

N

T

NO NO
Relay-7 Relay-8
C C
LN
~
50/60 Hz
10VA
100
250V AC !
- - - -
+ + + ++ + + +
T/C T/C T/C T/C
PT-100
3W
PT-100
3W
PT-100
3W
PT-100
3W
0-10V
DC

0-10V
DC

0-10V
DC

0-10V
DC

0/4-20
mADC

0/4-20
mADC

0/4-20
mADC

0/4-20
mADC

CH-1 CH-2 CH-3 CH-4
- - - -
+ + + ++ + +
T/C T/C T/C T/C
PT-100
3W
PT-100
3W
PT-100
3W
PT-100
3W
0-10V
DC

0-10V
DC

0-10V
DC

0-10V
DC

0/4-20
mADC

0/4-20
mADC

0/4-20
mADC

0/4-20
mADC

CH-5 CH-6 CH-7 CH-8
- - - -
+ + + ++ + + +
T/C T/C T/C T/C
PT-100
3W
PT-100
3W
PT-100
3W
PT-100
3W
0-10V
DC

0-10V
DC

0-10V
DC

0-10V
DC

0/4-20
mADC

0/4-20
mADC

0/4-20
mADC

0/4-20
mADC

CH-9 CH-10 CH-11 CH-12
- - - -
+ + + ++ + +
T/C T/C T/C T/C
PT-100
3W
PT-100
3W
PT-100
3W
PT-100
3W
0-10V
DC

0-10V
DC

0-10V
DC

0-10V
DC

0/4-20
mADC

0/4-20
mADC

0/4-20
mADC

0/4-20
mADC

CH-13 CH-14 CH-15 CH-16
+
+
www.multispanindia.com
Made in India
www.multispanindia.com
MS-5716R
Page-8
3)Cableusedforconnectiontopowersource,musthaveacrosssectionof1mmorgreater.Thesewires
shouldhaveinsulationscapacitymadeofatleast1.5kV.
2)Toreduceelectromagneticinterference,usewirewithadequateratingandtwistsofthesameof
equalsizeshallbemadewithshortestconnection.
4)Whenextendingthethermocoupleleadwires,alwaysusethermocouplecompensationwiresforwiring
fortheRTDtype,useawiringmaterialwithasmallleadresistance(5Ωmaxperline)andnoresistance
differentialsamongthreewiresshouldbepresent.
1)TopreventtheriskofelectricshockpowersupplytotheequipmentmustbekeptOFFwhiledoingthe
wiringarrangement.Donottouchtheterminalswhilepowerisbeingsupplied.
5)Abetteranti-noiseeffectcanbeexpectedbyusingstandardpowersupplycablefor
theinstrument.
WarningGuidelines
2
1)Thisequipment,beingbuilt-in-type,normallybecomesapartofmaincontrolpanelandinsuchcasethe
terminalsdonotremainaccessibletotheenduserafterinstallationandinternalwiring.
2)Donotallowpiecesofmetal,wireclippings,orfinemetallicfillingsfrominstallationtoentertheproduct
orelseitmayleadtoasafetyhazardthatmayinturnendangerlifeorcauseelectricalshocktotheoperator.
3)Circuitbreakerormainsswitchmustbeinstalledbetweenpowersourceandsupplyterminalto
facilitatepowerʻONʼorʻOFFʼfunction.Howeverthismainsswitchorcircuitbreakermustbe
installedatconvenientplacenormallyaccessibletotheoperator.
4)Useandstoretheinstrumentwithinthespecifiedambienttemperatureandhumidityrangesas
mentionedinthismanual.
InstallationGuidelines
MechanicalInstallation
1)Preparethepanelcutoutwithproperdimensionsasshowninfigure.
2)Fittheunitintothepanelwiththehelpofclampgiven.
3)Theequipmentinitsinstalledstatemustnotcomeincloseproximitytoanyheatingsource,
causticvapors,oilssteam,orotherunwantedprocessbyproducts.
4)Usethespecifiedsizeofcrimpterminal(M3.5screws)towiretheterminalblock.Tighteningthe
screwsontheterminalblockusingthetighteningtorqueoftherangeof1.2N.m.
5)Donotconnectanythingtounusedterminals.

Maintenance
1)Theequipmentshouldbecleanedregularlytoavoidblockageofventilatingparts.
2)Cleantheequipmentwithacleansoftcloth.Donotuseisopropylalcoholorany
othercleaningagent.
3)Fusibleresistormustnotbereplacedbyoperator.
SafetyPrecautions
Allsafetyrelatedcodifications,symbolsandinstructionsthatappearinthisoperatingmanual
orontheequipmentmustbestrictlyfollowedtoensurethesafetyoftheoperatingpersonnel
aswellastheinstrument.
Ifalltheequipmentisnothandledinamannerspecifiedbythemanufacturer,itmightimpairthe
protectionprovidedbytheequipment.
=>Readcompleteinstructionspriortoinstallationandoperationoftheunit.
WARNING:Riskofelectricshock.
www.multispanindia.com
MS-5716R
Page-9
C
I
D
TOP VIEW
F
H
G
E
E
A
D
B
MechanicalDimensions
RIGHT SIDE VIEWFRONT VIEW
MODEL A
192mm 140mm 157mm 97mm 10mm 130mm 27mm 187mm 89mm
BC
D E
F
DIMENSIONS
G H I
www.multispanindia.com
MS-5716R
Page-10
Note:
www.multispanindia.com
MS-5716R
Page-11
Note:
Productimprovementandupgradeisaconstantprocedure.Soformoreupdatedoperatinginformationandsupport,
PleasecontactourHelpline:+91-9978991474/76/82orEmailat [email protected]
/