2. Home
  3. Domestic appliances
  4. Small kitchen appliances
  5. Coffee makers
  6. Sunbeam
  7. EM4300
EM4300

Sunbeam EM4300 Quick start guide

  • Hello! I am an AI chatbot trained to assist you with the Sunbeam EM4300 Quick start guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
HOT
WATER
STEAM
ON /OFF
READY
ONE
CUP
ONE CUP
TWO CUP
S
INSERT
THERMOBLOCK
58MM CAFÉ GROUP HEAD
HOT
WATER
STEAM
TWO
CUP
STEAM
HOT
WATER
RETURN
INSERT
2.TURN
1. ALIGN
ONE CUP TWO CUP
MAX
2 L
MIN
S
INSERT
THERMOBLOCK
58MM CAFÉ GROUP HEAD
Quick Coffee Making Guide
1 L
1
Min
ON /OFF
OR
Check for water in
reservoir.
Keep Group Handle flat,
insert into Group Head
& turn to centre position.
Turn on.
Select either:
- One Cup Filter Basket.
- Two Cup Filter Basket.
ON/OFF LIGHT pulses
= Heating up.
Turn DIAL to either:
- One Cup - 30mL pour.
- Two Cup - 60mL pour.
Evenly tamp (press) grinds to
the level indicated.
READY LIGHT flashes
= Pour finished.
Return DIAL.
Leave Group Handle
in Group Head, until
after milk texturing.
Extraction begins
& will automatically
stop.
ON/OFF & READY LIGHTS are both
fully illuminated = Ready.
1. Start Up
3. Dose & Tamp2. Select Filter Baskets 4. Insert Group Handle
5. Extraction
Before First Use:
Wash parts. Prime machine by
running water through the Group Head.
See User Guide page 5 for details.
EM4300
STEAM
MAX
12
O’CLOCK
3
O’CLOCK
STEAM
RETURN
HOT
WATER
PAUSE
RETURN
60-65°C
BANG
Steam Wand position:
- Arm at 12 o'clock.
- Tip at 3 o'clock.
6. Prep Milk Jug 7. Before Texturing Milk
9. Purge & Clean Steam Wand
8. Milk Texturing
10. Cleaning Up
Return DIAL to the
vertical position.
Wipe Steam Wand
& Tip with a
damp cloth.
Turn DIAL to
HOT WATER
for 1-2 secs.
Pro Tip:
To keep optimum
Steam Wand
performance,
always purge &
clean the Steam
Wand after
texturing milk.
Remove spent cake
from Group Handle.
Insert Steam Wand
Tip just below the
surface of the milk.
Some water may
come out of
Steam Wand.
STEAM LIGHT is ON
Steam Ready. Pause
steam by returning DIAL.
Fill Jug with cold
milk to just below the
bottom of the spout.
Turn DIAL to STEAM.
STEAM LIGHT flashes
= Warming up.
Pro Tip:
For best
milk texturing
results, ensure
steam has first
warmed up
(STEAM LIGHT
fully ON).
You will hear
the Pump start.
Turn DIAL to
STEAM position to
start texturing milk.
Milk ready when Jug
is too hot to touch for
3 secs.
Return DIAL to
vertical position.
For detailed Coffee Making Guide see User Guide pages 6-9.
To perfect coffee making skills see User Guide pages 10-15.
Visit our Coffee Hub to see more - sunbeam.com.au/coffeehub
3245_A_QG
/