Miller CARRYING CART Owner's manual
- Category
- Car kits
- Type
- Owner's manual
This manual is also suitable for
OWNER’S MANUAL
OM-1090 029 648C
2012−01
Use above FORM number when ordering extra manuals.
Carrying Cart (056 301)
1. Safety Symbol Definitions
DANGER! − Indicates a hazardous situation which, if not
avoided, will result in death or serious injury. The possible
hazards are shown in the adjoining symbols or explained
in the text.
Have only trained and qualified persons install, operate,
or service this unit. Read the safety information at the
beginning of these instructions and in each section. Call
your distributor if you do not understand the directions.
For INDUCTION HEATING SAFETY and EMF informa-
tion, read owner’s manual(s).
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury. The possible ha-
zards are shown in the adjoining symbols or explained in
the text.
Beware of electric shock from wiring. Disconnect input
power before installing this kit. Reinstall all panels and
covers.
NOTICE
Indicates statements not related to personal injury.
Indicates special instructions.
Wear safety glasses with side shields.
CALIFORNIA PROPOSITION 65 WARNINGS
Welding or cutting equipment produces fumes or gases which contain chemicals known to the State of California to cause birth defects and, in
some cases, cancer. (California Health & Safety Code Section 25249.5 et seq.)
This product contains chemicals, including lead, known to the state of California to cause cancer, birth defects, or other reproductive harm.
Wash hands after use.
Notes
OM-1090 Page 2
Description (Qty)
Part
No.
Item
No.
1 601 865 Nut, 1/4-20 (18)
2 602 207 Washer, 1/4 lock (18)
3 086 841 Bracket (1)
4 604 224 Screw, 250-20 x .75 (18)
5 112 280 Leg, LH-rear (1)
6 086 843 Tray (2)
7 112 281 Leg, RH-rear (1)
8 112 283 Caster, 4 in stationary (2)
9 604 537 Nut, 5/16-18 (4)
10 602 211 Washer, 5/16 lock (4)
11 601 944 Screw, 5/16-18 x 3/4 (4)
12 601 871 Nut, 3/8-16 (2)
13 602 213 Washer, 3/8 lock (2)
14 010 910 Washer, 3/8 flat (2)
15 008 999 Caster, 4 in swivel (2)
16 112 278 Leg (2)
Be sure to provide Model and Serial Num-
ber when ordering replacement parts.
3/8, 7/16, 1/2, 9/16 in.
Tools Needed:
ST-090 282-C / ST-800 277
3
4
6
1
2
4
7
8
9
10
12
11
13
14
15
16
2
1
5
! Turn off power source and
disconnect input power.
Figure 1. Installing Carrying Cart
-
1
-
2
Miller CARRYING CART Owner's manual
- Category
- Car kits
- Type
- Owner's manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Miller MD026806D Owner's manual
-
-
Miller PIPEWORX COOLER CE (MILAN) Owner's manual
-
Miller MA350805U Owner's manual
-
-
-
-
-
-