LG 60PS60FD, 42PQ20D, 50PQ20D, 50PS30FD, 60PS40FD Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the LG 60PS60FD Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
OWNER’S MANUAL
PLASMA TV MODELS
4422PPQQ22
******
5500PPQQ22
******
4422PPQQ66
******
5500PPQQ66
******
5500PPSS33
******
6600PPSS44
******
6600PPSS66******
PLASMA TV
Please read this manual carefully before operating
your TV.
Retain it for future reference.
Record the model number and serial number of the
TV.
Refer to the label on the back cover and quote this
information.
To your dealer when requiring any service.
ENGLISH
Trade Mark of the DVB Digital Video
Broadcasting Project (1991 to 1996)
IIDD NNuummbbeerr((ss))::
6028: 42PQ20D-AA
6027: 50PQ20D-AA
6043: 42PQ60D-AA
6042: 50PQ60D-AA
6339: 50PS30FD-AA
6610: 60PS40FD-AA
6765: 60PS60FD-AA
This product qualifies for ENERGY STAR
in the “factory default (
HHoommee UUssee
mode)” setting and this is the setting in
which power savings will be achieved.
Changing the factory default picture set-
ting or enabling other features will
increase power consumption that could
exceed the limits necessary to qualify for
Energy Star rating.
HDMI
TM
, the HDMI logo and High-
Definition Multimedia Interface
are trademarks or registered
trademarks of HDMI Licensing.
1
ACCESSORIES
ACCESSORIES
Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the
dealer where you purchased the TV.
Image shown may differ from your TV.
Owner’s Manual
Batteries
Power Cord
Owner's
Manual
Protection Cover
(Refer to p.8)
Bolts for stand assembly
(Except for 60PS4***, 60PS6***)
(Refer to p.8)
x 4
Cable Holder
(Refer to p.8)
AW-50PG60MS
(Except for 60PS4***, 60PS6***)
Ferrite core can be used to reduce the electromagnetic
wave when connecting the power cord.
The closer the location of the ferrite core to the power
plug, the better it is.
Use of ferrite core
(This item is not included for all models.)
Install the power plug closely.
x 2
Ferrite Core
(
This item is not included for
all models.
)
Polishing Cloth
Polishing cloth for use on the screen.
*
Lightly wipe any stains or fingerprints on the surface
of the TV with the polishing cloth.
Do not use excessive force. This may cause scratching
or discolouration.
This item is not included for all models.
Wall Mounting Bracket
(Separate purchase)
Remote Control
R
A
T
IO
R
A
RAT
I
O
TIO
F
R
E
E
Z
E
FREEZE
or
E
N
E
R
G
Y
S
A
V
I
N
G
ENERGY SAVING
Cable management clip
(Refer to p.8)
(Only 60PS4***, 60PS6***)
AW-60PG60MS
(Only 60PS4***, 60PS6***)
Except for
60PS4***
CONTENTS
2
CONTENTS
ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
PREPARATION
Front Panel Controls . . . . . . . . . . . . . . . . . . . . . . 4
Back Panel Information . . . . . . . . . . . . . . . . . . . . 7
Stand Installation . . . . . . . . . . . . . . . . . . . . . . . . . 8
Not Using the desk-type stand . . . . . . . . . . . . . . .8
Back Cover for Wire Arrangement . . . . . . . . . . . . . 8
Careful installation advice . . . . . . . . . . . . . . . . . . . 9
Swivel Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Desktop Pedestal Installation . . . . . . . . . . . . . . . 10
Wall Mount: Horizontal Installation . . . . . . . . . . . 11
Antenna Connection
. . . . . . . . . . . . . . . . . . . . . . 12
EXTERNAL EQUIPMENT SETUP
HD Receiver Setup . . . . . . . . . . . . . . . . . . . . . . . 13
DVD Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
VCR Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
AV Output Setup . . . . . . . . . . . . . . . . . . . . . . . . 20
Digital Audio Out Setup . . . . . . . . . . . . . . . . . . 20
Other A/V Source Setup . . . . . . . . . . . . . . . . . . 21
Usb Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
PC Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
- Screen Setup for PC Mode . . . . . . . . . . . . . 26
WATCHING TV / PROGRAMME CONTROL
Remote Control Key Functions . . . . . . . . . . . . . 30
Turning on the TV . . . . . . . . . . . . . . . . . . . . . . . 34
Programme Selection . . . . . . . . . . . . . . . . . . . . 34
Volume Adjustment . . . . . . . . . . . . . . . . . . . . . . 34
Quick Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
On-Screen Menus Selection and Adjustment . . 36
Auto Programme Tuning . . . . . . . . . . . . . . . . . . . 37
Manual Programme Tuning (In Digital Mode) . . 38
Manual Programme Tuning (In Analogue Mode) . . 39
Programme Edit . . . . . . . . . . . . . . . . . . . . . . . . . 41
In DTV/Radio Mode . . . . . . . . . . . . . . . . . . . . . . 42
In TV Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Software Update . . . . . . . . . . . . . . . . . . . . . . . . 44
Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Selecting the Programme Table . . . . . . . . . . . . . 47
Input List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Input Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
AV Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Initializing (Reset to original factory settings) . . .54
TO USE A USB DEVICE
When connecting a USB device . . . . . . . . . . . . . 55
Photo List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Music List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
Movie List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63
DivX Registration Code . . . . . . . . . . . . . . . . . . . . . . . .67
Deactivation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68
EPG (ELECTRONIC PROGRAMME
GUIDE) (IN DIGITAL MODE)
- Switch on/off EPG . . . . . . . . . . . . . . . . . . . . 69
- Select Programme . . . . . . . . . . . . . . . . . . . . 69
- Button Function in NOW/NEXT Guide Mode . . 70
- Button Function in 7 Day Guide Mode . . . . 70
- Button Function in Date Change Mode . . . . 71
- Button Function in Extended Description Box . . 71
- Button Function in Remind Setting Mode . . . . . . . . 72
- Button Function in Schedule List Mode . . . . 72
PICTURE CONTROL
Picture Size (Aspect Ratio) Control . . . . . . . . . 73
ENERGY SAVING . . . . . . . . . . . . . . . . . . . . .75
Preset Picture Settings
- Picture Mode-Preset . . . . . . . . . . . . . . . . . . . 76
Manual Picture Adjustment
- Picture Mode-User option . . . . . . . . . . . . . . 77
Picture Improvement Technology . . . . . . . . . . . 78
Expert Picture Control . . . . . . . . . . . . . . . . . . . . 80
CONTENTS
3
Picture Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Image Sticking Minimization (ISM) Method . . . 84
Demo Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Mode Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . .86
SOUND CONTROL
Auto Volume Leveler . . . . . . . . . . . . . . . . . . . . . . 87
Preset Sound Settings - Sound Mode . . . . . . . . 88
Sound Setting Adjustment -User Mode . . . . . . 89
SRS TruSurround XT . . . . . . . . . . . . . . . . . . . . . 90
Clear Voice II . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
TV Speakers On/ Off Setup . . . . . . . . . . . . . . . 93
Selecting Digital Audio Out . . . . . . . . . . . . . . . . 94
Audio Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Stereo Reception (In Analogue Mode Only) . . . . . . . . . . . . . 96
Speaker Sound Output Selection . . . . . . . . . . . 96
TIME SETTING
Clock Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97
Auto On/ Off Timer Setting . . . . . . . . . . . . . . . 98
Sleep Timer Setting . . . . . . . . . . . . . . . . . . . . . . 99
PARENTAL CONTROL / RATINGS
Set Password & Lock System . . . . . . . . . . . . . . 100
Block Programme . . . . . . . . . . . . . . . . . . . . . . . .101
Parental Control (In Digital Mode Only) . . . . . 102
Input Block . . . . . . . . . . . . . . . . . . . . . . . . . . . .103
Key Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
TELETEXT (IN DIGITAL MODE ONLY)
Switch on/off . . . . . . . . . . . . . . . . . . . . . . . . . . 105
SIMPLE Text . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
TOP Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
FASTEXT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Special Teletext Functions . . . . . . . . . . . . . . . . 106
APPENDIX
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . 107
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Product Specifications . . . . . . . . . . . . . . . . . . . 110
IR Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
External Control Device Setup . . . . . . . . . . . . . 113
PREPARATION
4
PREPARATION
FRONT PANEL CONTROLS
Image shown may differ from your TV.
CAUTION
G
When the TV cannot be turned on with the remote control, press the main power button on the TV
(When the power is turned off with the main power button on the TV, it will not be turned on with the
remote control.)
Power/Standby Indicator
Illuminates red in standby mode.
The LED is off while the TV remains on.
42/50PQ6
***,
60PS6***
Remote Control
Sensor
Intelligent Sensor
Adjusts picture accord-
ing to the surrounding
conditions
MENU
INPUT
OK
P
P
PROGRAMME
VOLUME
OK
MENU
INPUT
POWER
P
MENU
INPUT
OK
5
PREPARATION
42/50PQ2
***
OKMENUINPUT
P
MENU
INPUT
OK
VOLUME POWER
P
MENUMENU
INPUTINPUT
OKOK
P
MENU
INPUT
OK
Power/Standby Indicator
Illuminates red in standby mode.
Illuminates blue when the TV is
switched on.
Intelligent Sensor
Adjusts picture according
to the surrounding
conditions
P
MENU
INPUT
OK
Remote Control
Sensor
PROGRAMME
PROGRAMMEVOLUMEMENU OKINPUT POWER
P
MENUMENU
INPUTINPUT
OKOK
P
MENU
INPUT
OK
Intelligent Sensor
Adjusts picture according
to the surrounding
conditions.
Remote Control
Sensor
Power/Standby Indicator
Illuminates red in standby mode.
Illuminates blue when the TV is switched on.
P
MENU
INPUT
OK
50PS3
***
6
PREPARATION
PREPARATION
Image shown may differ from your TV.
OK
MENU
INPUT
P
PROGRAMMEVOLUMEMENU OKINPUT
OKOK
MENUMENU
INPUTINPUT
P
OK
MENU
INPUT
P
Remote Control Sensor
POWER Button
Power/Standby Indicator
• illuminates red in standby mode.
• illuminates green when the TV is
switched on.
60PS4
***
7
PREPARATION
BACK PANEL INFORMATION
A
Image shown may differ from your TV.
Power Cord Socket
This TV operates on an AC power. The voltage is
indicated on the Specifications page. Never
attempt to operate the TV on DC power.
OPTICAL DIGITAL AUDIO OUT
Connect digital audio to various types of equipment.
Use to connect to a Digital Audio Component.
Use an Optical audio cable.
RGB/DVI Audio Input
Connect the audio from a PC or DTV.
HDMI Input
Connect a HDMI signal to HDMI IN or DVI (VIDEO)
signal to HDMI/DVI port with DVI to HDMI cable.
RGB IN Input
Connect the output from a PC.
RS-232C IN (CONTROL & SERVICE) PORT
Connect to the RS-232C port on a PC.
This port is used for Service or Hotel mode.
Audio/Video Input (AV IN1 / AV IN2)
Connect audio/video output from an external
device to these jacks.
AV Output
Connect second TV or monitor to the AV OUT
socket on the
TV.
Component Input
Connect a component video/audio device to
these jacks.
Antenna Input
Connect RF antenna to this jack.
USB Input
Connect USB storage device to this jack.
S-Video Input
Connect S-Video out from an S-VIDEO device.
1
2
3
4
5
8
9
10
11
R
VARIABLE AUDIO OUT
1
2
1
AV IN 2
L/MONO
R
AUDIO
VIDEO
S-VIDEO 3
AV
AUDIO IN
(RGB/DVI)
VIDED
R
-A
U
D
IO
-L(M
O
N
O
)
IN1 OUT
R - AUDIO - L VIDEO
COMPONENT IN
1
2
COMPONENT IN
AV IN 2
L/
L/
MONO
MONO
R
AUDIO
AUDIO
VIDEO
VIDEO
S-VIDEO
S-VIDEO
3
COMPONENT IN
COMPONENT IN
11
4
2
104
5
6 9
7
6
3
12
12
7
7
8
8
PREPARATION
PREPARATION
STAND INSTALLATION
(Except for 60PS4***, 60PS6***)
1
2
3
Carefully place the TV screen side down on a cushioned
surface to protect the screen from damage.
Assemble the TV as shown.
Fix the 4 bolts securely using the holes in the
back of the TV.
GG
When assembling the stand,
make sure to distinguish and
assemble the front and rear
side of the stand correctly.
NOTE
!
FRONT
Image shown may differ from your TV.
When assembling the desk type stand, check whether the
bolt is fully tightened. (If not tightened fully, the product
can tilt forward after the product installation.) If you
tighten the bolt with excessive force, the bolt can deviate
from abrasion of the tightening part of the bolt.
BACK COVER FOR WIRE
ARRANGEMENT
Image shown may differ from your TV.
After Connecting the cables as necessary, install
CABLE HOLDER as shown and bundle the cables.
CABLE HOLDER
Image shown may differ from your TV.
When installing the wall-mounted unit, use the protection cover. Insert
the
PPRROOTTEECCTTIIOONN CCOOVVEERR
into the TV until clicking sound.
NOT USING THE DESK-TYPE STAND
protection cover
Only 60PS4***, 60PS6***
Install the
CCAABBLLEE MMAANNAAGGEEMMEENNTT CCLLIIPP
as shown.
CABLE
MANAGE-
MENT CLIP
Hold the
CCAABBLLEE MMAANNAAGGEEMMEENNTT CCLLIIPP
with both
hands and pull it upward.
How to remove the cable management clip
NOTE
!
GG
Do not use the CABLE MANAGEMENT CLIP to
lift the TV.
- If the TV is dropped, you may be injured or the
TV may be damaged.
9
PREPARATION
CAREFUL INSTALLATION ADVICE
A
You should purchase necessary components to fix the TV safety and secure to the wall from a hardware supplier.
A
Position the TV close to the wall to avoid the possibility of it falling when pushed.
A
The instructions shown below are a safer way to set up the TV, by fixing it to the wall, avoiding the possibility
of it falling forwards if pulled. This will prevent the TV from falling forward and causing injury. This will also pre-
vent the TV from damage. Ensure that children do not climb or hang from the TV.
NOTE
!
G
When moving the TV undo the cords first.
G
Use a platform or cabinet strong and large enough to support the size and weight of the TV.
G
To use the TV safely make sure that the height of the bracket on the wall and on the TV is the same.
3
1
2
Use the eye-bolts or TV brackets/bolts to fix the product to the wall as shown in the picture.
(If your TV has bolts in the eyebolts, loosen then bolts.)
* Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.
Secure the wall brackets with the bolts on the wall. Match the height of the bracket that is mounted on the
wall.
3
Use a sturdy rope or wire to tie the product for alignment. It is safer to tie the rope so it becomes horizon-
tal between the wall and the product.
2
1
2
1
10
PREPARATION
PREPARATION
OK
MENU
INPUT
P
DESKTOP PEDESTAL INSTALLATION
For adequate ventilation allow a clearance of 4” (10cm) all around the TV.
A
The TV can be installed in various ways such as on a wall, or on a desktop etc.
A
The TV is designed to be mounted horizontally.
EARTHING
Ensure that you connect the earth wire to prevent possible
electric shock. If grounding methods are not possible, have
a qualified electrician install a separate circuit breaker.
Do not try to earth the TV by connecting it to telephone
wires, lightening rods or gas pipes.
4 inches
4 inches
4 inches
SWIVEL STAND
After installing the TV, you can adjust the TV set manually to the left or right direction by 20 degrees to suit
your viewing position.
Power Supply
Circuit breaker
4 inches
11
PREPARATION
WALL MOUNT: HORIZONTAL INSTALLATION
A
We recommend the use of a LG Brand wall mounting bracket when mounting the TV to a wall.
A
We recommend that you purchase a wall mounting bracket which supports VESA standard.
A
LG recommends that wall mounting be performed by a qualified professional installer.
NOTE
!
G
Should Install wall mount on a solid wall perpendicular to the floor.
G
Should use a special wall mount, if you want to install it to ceiling or slanted wall.
G
The surface that wall mount is to be mounted on should be of sufficient strength to support the weight of TV set;
e.g. concrete, natural rock, brick and hollow block.
G
Installing screw type and length depends on the wall mount used. Further information, refer to the instructions
included with the mount.
G
LG is not liable for any accidents or damage to property or TV due to incorrect installation:
- Where a non-compliant VESA wall mount is used.
- Incorrect fastening of screws to surface which may cause TV to fall and cause personal injury.
- Not following the recommended Installation method.
4 inches
4 inches
4 inches
4 inches
4 inches
AA
BB
Model
VESA
(A
*
B)
Standard
Screw
Quantity
42PQ2
***
50PQ2
***
42PQ6
***
50PQ6
***
50PS3
***
60PS4
***
60PS6
***
400
*
400
400
*
400
400
*
400
400
*
400
400
*
400
600
*
400
600
*
400
M6
M6
M6
M6
M6
M8
M8
4
4
4
4
4
4
4
12
PREPARATION
PREPARATION
AV IN 2
L/MONO
R
AUDIO
VIDEO
S-VIDEO 3
COMPONENT IN
COMPONENT IN
AV IN 2
L/MONO
R
AUDIO
VIDEO
S-VIDEO 3
COMPONENT IN
COMPONENT IN
ANTENNA CONNECTION
AV IN 3
L/ MONO
R
AUDIO
VIDEO
S-VIDEO HDMI IN 3
For optimum picture quality, adjust antenna direction.
An antenna cable and converter are not supplied.
To prevent damage do not connect to the mains outlet until all connections are made between the devices.
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
Outdoor
Antenna
(VHF, UHF)
Wall
Antenna
Socket
RF Coaxial Wire (75 ohm)
Antenna
UHF
Signal
Amplifier
VHF
In poor signal areas, to achieve better picture quality it may be necessary to install a signal amplifier to the
antenna as shown above.
If signal needs to be split for two TVs, use an antenna signal splitter for connection.
13
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
HD RECEIVER SETUP
To avoid damaging any equipment, never plug in any power cords until you have finished connecting all equipment.
This section on EXTERNAL EQUIPMENT SETUP mainly uses diagrams for the 42/50PQ6
***
models.
Image shown may differ from your TV.
Connecting with a component cables
AV IN 1 AV OUT
L/MONO
R
AUDIO
VIDEO
L
R
AUDIO
VIDEO
COMPONENT IN
COMPONENT IN
1
2
1
2
Signal
480i/576i
480p/576p
720p/1080i
108 0 p
Component
O
O
O
O
(50Hz/60Hz only)
HDMI
X
O
O
O
(24Hz/30Hz/50Hz/60Hz)
This TV can receive Digital RF/Cable signals without an external digital set-top box. However, if you do receive
Digital signals from a digital set-top box or other digital external device, refer to the diagram as shown below.
Connect the video outputs
(
Y, PB, P
R
)
of the digital set
top box to the
CCOOMMPPOONNEENNTT IINN VVIIDDEEOO
jacks on the
TV.
Connect the audio output of the digital set-top box to
the
CCOOMMPPOONNEENNTT IINN AAUUDDIIOO
jacks on the TV.
Turn on the digital set-top box.
(
Refer to the owner’s manual for the digital set-top box.
)
Select
CCoommppoonneenntt 11
input source using the
IINNPPUUTT
button on the remote control.
If connected to
CCOOMMPPOONNEENNTT IINN 22
input, select
CCoommppoonneenntt 22
input source.
2
3
4
1
14
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
Connecting a set-top box with an HDMI cable
2
1
AV IN 1 AV OUT
L/MONO
R
AUDIO
VIDEO
L
R
AUDIO
VIDEO
COMPONENT IN
COMPONENT IN
1
Connecting with an HDMI to DVI cable
AV IN 1 AV OUT
L/MONO
R
AUDIO
VIDEO
L
R
AUDIO
VIDEO
AV
AUDIO IN
(RGB/DVI)
VIDEO
R-AUDIO-L(MONO)
IN1 OUT
R - AUDIO - L VIDEO
COMPONENT IN
1
2
1
COMPONENT IN
1
2
Connect the digital set-top box to
HHDDMMII//DDVVII IINN 11
,
HHDDMMII IINN 22
or
HHDDMMII IINN 33
jack on the TV.
Turn on the digital set-top box.
(
Refer to the owner’s manual for the digital set-top box.
)
Select
HHDDMMII11
,
HHDDMMII22
or
HHDDMMII33
input source using
the
IINNPPUUTT
button on the remote control.
2
3
1
Connect the digital set-top box to
HHDDMMII//DDVVII IINN 11
jack on the TV.
Connect the audio output of the digital set-top box to
the
AAUUDDIIOO IINN ((RRGGBB//DDVVII))
jack on the TV.
Turn on the digital set-top box.
(
Refer to the owner’s
manual for the digital set-top box.
)
Select
HHDDMMII11
input source using the
IINNPPUUTT
button
on the remote control.
2
3
4
1
NOTE
!
G
Check your HDMI cable is over version 1.3.
I
f the HDMI cables don’t support HDMI version 1.3, it can
cause flickers or no screen display. In this case use the latest
cables that supprot HDMI version 1.3.
15
EXTERNAL EQUIPMENT SETUP
DVD SETUP
Connecting with a component cables
AV IN 1 AV OUT
L/MONO
R
AUDIO
VIDEO
L
R
AUDIO
VIDEO
COMPONENT IN
COMPONENT IN
1
2
Component Input ports
To achieve better picture quality, connect a DVD player to the component input ports as shown below.
Component ports on the TV
YPB PR
Video output ports
on DVD player
Y
Y
Y
Y
P
B
B-Y
Cb
Pb
P
R
R-Y
Cr
Pr
1
2
Connect the video outputs
(
Y, PB, PR
)
of the DVD to the
CCOOMMPPOONNEENNTT IINN VVIIDDEEOO
jacks on the TV.
Connect the audio outputs of the DVD to the
CCOOMMPPOONNEENNTT IINN AAUUDDIIOO
jacks on the TV.
Turn on the DVD player, insert a DVD.
Select
CCoommppoonneenntt 11
input source using the
IINNPPUUTT
button on the remote control.
If connected to
CCOOMMPPOONNEENNTT IINN 22
input, select
CCoommppoonneenntt 22
input source.
Refer to the DVD player's manual for operating
instructions.
2
3
4
5
1
16
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
Connecting with a S-Video cable
L R
S-VIDEOVIDEO
OUTPUT
SWITCH
ANT IN
ANT OUT
2
HDMI IN 3
Connect the S-VIDEO output of the DVD to the
SS --
VVIIDDEEOO
input on the TV.
Connect the audio outputs of the DVD to the
AAUUDDIIOO
input jacks on the TV.
Turn on the DVD player, insert a DVD.
Select
AAVV22
input source using the
IINNPPUUTT
button on
the remote control.
Refer to the DVD player's manual for operating
instructions.
2
3
4
5
1
1
2
17
EXTERNAL EQUIPMENT SETUP
2
1
2
Connecting the HDMI cable
Connect the HDMI output of the DVD to the
HHDDMMII//DDVVII IINN 11
,
HHDDMMII IINN 22
,or
HHDDMMII IINN 33
jack on
the TV.
Select
HHDDMMII11
,
HHDDMMII22
or
HHDDMMII33
input source using
the
IINNPPUUTT
button on the remote control.
Refer to the DVD player's manual for operating
instructions.
2
3
1
1
GG
The TV can receive video and audio signals simultaneously
when using a HDMI cable.
GG
If the DVD does not support Auto HDMI, you must set the
output resolution appropriately.
GG
Check that your HDMI cable is version 1.3 or higher.
If the HDMI cables don’t support HDMI version 1.3, flicker-
ing or no screen display can result. Please use the latest
cables that support at least HDMI version 1.3.
NOTE
!
18
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
VCR SETUP
To avoid picture noise (interference), allow adequate distance between the VCR and TV.
AV IN 1 AV OUT
L/MONO
R
AUDIO
VIDEO
L
R
AUDIO
VIDEO
OUTPUT
SWITCH
ANT IN
R
S-VIDEO VIDEO
ANT OUT
L
2
2
R
A
U
D
IO
L
(M
O
N
IN1 OUT
R - AUDIO - L
COMPONENT IN
12
Wall Jack
Antenna
1
2
Connecting with a RF Cable
Connect the
AANNTT OOUUTT
socket of the VCR to the
AANNTTEENNNNAA IINN
socket on the TV.
Connect the antenna cable to the
AANNTT IINN
socket of the VCR.
Press the
PPLLAAYY
button on the VCR and match the appropriate channel between the TV and VCR for
viewing.
2
3
1
/