LG RT-42LZ30 User manual

Brand: LG

Model: RT-42LZ30

Category: LCD TVs

Type: User manual

This manual is also suitable for

42LZ30

LCD

Colour Television

OWNER’S MANUAL

Please read this manual carefully before operating your set.

Retain it for future reference.

Record model number and serial number of the set.

See the label attached on the back cover and quote this

information to your dealer when you require service.

Model number :

Serial number :

P/NO : 3828TUL300B (0510-REV02)

Printed in Korea

Contents

Installation 3

Location and function of controls 4

Remote control

Internal generator charge / Front/Side panel / Back panel

Basic operation 8

On and off / Programme selection

Volume adjustment

Quick view / Mute function

On screen language selection

ON SCREEN Menus 9

Menu selection

STATION Menu 10

Auto programme tuning

Manual programme tuning

Assigning a station name/Fine tuning

Programme edit

Favourite programme/Calling the programme table

PICTURE Menu 15

PSM (Picture Status Memory)

Picture adjustment

ACC/ XD

SOUND Menu 17

SSM (Sound Status Memory)

Sound adjustment/SRS WOW

Stereo/Dual reception / NICAM reception

Sound output selection

TIMER menu 20

Clock / On/Off Time / Auto Off / Sleep timer

SPECIAL Menu 22

Main Picture Source Selection

Child lock/Power Indicator/Transparency

Picture Size Zoom/

Reset

SCREEN Menu 25

Picture format

Auto adjustment /Clock and Phase

SCREEN Position

Manual Configure

Screen adjustments

Initializing (Reset to original factory value)

Selecting Wide XGA mode

YNR (Y-signal Noise Reduction) / Split Zoom

PIP/POP/PBP operation 28

PIP/POP/PBP mode / Input mode selection for sub picture

Sub Picture / Size Source

Image / Sound /Moving the sub Picture

Swap / Swapping between main and sub pictures

Programme selection for sub picture

Teletext (This feature is not available in all countries.)32

Switch on/off / SIMPLE text / TOP text (This feature is not avail-

able in all countries.)

FASTEXT / Special teletext functions

Connection of external equipment 35

Aerial socket / Euro scart sockets

S-Video/Audio in sockets (S-Video)

PC in socket / Audio/Video in sockets

Displayable Monitor Specification 37

RGB Mode / DVI Mode

External Control Device Setup 38

RS-232C input socket / D-Sub 9-pin male

Set ID / Communication Parameters

Command Reference List

Transmission/Receiving Protocol

Programming the Remote control 42

Programming Codes 43

Troubleshooting check list 47

Installation

Power

This set operates on an AC mains supply, the voltage is as indicat-

ed on the label on the back cover. Never apply DC power to the set.

In the event of thunderstorms or powercuts, please pull out the aer-

ial and mains plugs.

a. Open the back panel cover.

b. After connecting the power cord to the set, connect the power

cord to an AC mains.

c. Fix cables with the supplied cable tie after collecting connected

cables.

d. Pull the cables through the hole on the set.

e. Close the back panel cover.

Warning

To prevent fire or shock hazard, do not expose the set to rain or mois-

ture. Do not rub or strike the Active Matrix LCD with anything hard as

this may scratch, mar, or damage the Active Matrix LCD permanently.

Service

Never remove the back cover of the set as this can expose you to

high voltage and other hazards. If the set does not operate proper-

ly, unplug it and call your dealer.

Aerial

Connect the aerial cable to the socket marked +75 Ω on the back.

For the best reception an outdoor aerial should be used.

Location

Position your set so that no bright light or sunlight falls directly onto

the screen. Care should be taken not to expose the set to any

unnecessary vibration, moisture, dust or heat. Also ensure that the

set is placed in a position to allow a free flow of air. Do not cover

the ventilation openings on the back cover.

If you intend to mount the TV to a wall, attach

VESA standard mount-

ing interface

(optional parts) to the back of the TV.

When you install

the set to use the wall mounting bracket (optional parts), fix it care-

fully so as not to drop.

Cleaning

Unplug the set before cleaning the face of the LCD Screen. Dust

the set by wiping the screen and the cabinet with a soft, clean cloth.

If the screen requires additional cleaning, use a clean, damp cloth.

Do not use liquid cleaners or aerosol cleaners.

On Disposal

The fluorescent lamp used in this product contains a small amount

of mercury.

Do not dispose of this product with general household waste.

Disposal of this product mute be carried out in accordance to the

regulations of your local authority.

a/e

Location and function of controls

All the functions can be controlled with the remote control.

Some functions can also be adjusted with the buttons on the side

panel of the set.

Remote Control

1. POWER

Switches the set on from standby or off to standby.

2. TV/AV

Selects

TV, AV, S-Video, Component1, Component2,

RGB PC

, DVI PC modes.

switches the set on from standby.

3. INPUT

Selects

TV, AV, S-Video, Component1, Component2,

RGB PC

, DVI PC modes.

4. ARC (Aspect Ratio Control)

Changes the picture format.

5. NUMBER BUTTONS

Switches the set on from standby or directly select a number.

6. LIST

Displays the programme table.

7. PSM (Picture Status Memory)

Recalls your preferred picture setting.

8. VOLUME UP/DOWN

Adjusts the volume.

Programme UP/DOWN

Selects a programme.

9. MENU

Selects a menu.

10.

(Up/Down/

Left/Right

) BUTTONS

Selects a menu item.

Adjusts menu settings.

Accepts your selection or displays the current mode.

11.

VCR/DVD BUTTONS

Control some video cassette recorders or DVD player

("RECORD" button is not available for DVD player).

12. SLEEP

Sets the sleep timer.

13. TELETEXT BUTTONS (This feature is not available in all coun-

tries.)

These buttons are used for teletext.

For further details, see the ‘Teletext’ section.

: No function

TV/AV

INPUT

MODE

ARC

PSM

SSM

VOL PR

PIP/POP/PBP

TEXT

EXIT

PIP PR-

PIP PR+ SWAP

PIP INPUT

PLAY PAUSE STOP RECORD

WIN.SIZE

WIN.POSITION

SLEEP I/II

REW FF SKIP

POW

MUTE

Q.VIEWLIST

MIX

REVEAL

SIZE HOLDUPDATE

INDEX

MODE

TIME

(With TELETEXT)

TV/AV

INPUT

MODE

ARC

PSM

SSM

VOL PR

PIP/POP/PBP

EXIT

PIP PR-

PIP PR+ SWAP

PIP INPUT

PLAY PAUSE STOP RECORD

WIN.SIZE

WIN.POSITION

SLEEP I/II

REW FF SKIP

POWER

MUTE

Q.VIEWLIST

Location and function of controls

14.

MODE

Selects the remote operating mode: TV, VCR, DVD, CABLE,

STB or AUDIO. Select other operating modes, for the remote to

operate external devices.

15. MUTE

Switches the sound on or off.

16. Q.VIEW

Returns to the previously viewed programme.

Selects a favorite programme.

17. SSM (Sound Status Memory)

Recalls your preferred sound setting.

18. PIP BUTTONS

PIP/POP/PBP

Switches the sub picture select PIP, POP, PBP or off modes.

PIP PR +/-

Selects a programme for the sub picture.

SWAP

Alternates between main and sub picture.

PIP INPUT

Selects the input mode for the sub picture.

WIN.SIZE

Adjusts the sub picture size.

WIN POSITION

Moves the sub picture to

direction.

19. EXIT

Exits from each mode.

20. I/II

Selects the language during dual language broadcast.

Selects the sound output.

Note: In teletext mode, the PIP PR -/+, SWAP and PIP INPUT but-

tons are used for teletext function.

(Without TELETEXT)

Installing Batteries

• Open the battery compartment cover on the back side and insert

two 1.5V AA size batteries in correct polarity (+ with +, - with -).

• Don’t mix old or used batteries with new ones.

• Close the cover.

VOL

ON/OFF

/ ll

Location and function of controls

1. (ON / OFF)

Switches the set on or off.

2. TV / AV

Selects TV, AV, S-Video, Component1,

Component2, RGB PC

, DVI PC modes

switches the set on from standby.

3. MENU

Selects a menu.

4. OK

Accepts your selection or displays the current

mode.

(Volume Down/Up)

Adjusts the volume.

Adjusts menu settings.

(Programme Up/Down)

Selects a programme or a menu item.

Switches the set on from standby.

7. POWER/STANDBY Indicator

Illuminates red in standby mode.

Illuminates green when the set is switched on.

Illuminates amber in RGB PC/DVI PC mode

(DPM Mode).

8. Remote Control Sensor

Front / Side panel

/ ll

Location and function of controls

1. POWER CORD SOCKET

2. REMOTE CONTROL JACK

3. RS-232C SERIAL PORTS

4. DVI (Digital Visual Interface) PC / RGB PC /

PC AUDIO IN SOCKETS

Connect the set output socket of the PER-

SONAL COMPUTER to this socket.

5. COMPONENT1(DTV, DVD), COMPONENT2

(DVD) IN SOCKETS

Connect the audio/video out sockets of external

equipment to these sockets.

6. AV OUT SOCKETS

7. AERIAL SOCKET

Connect the RF socket of the VCR to the aer-

ial socket.

8. AUDIO/VIDEO IN SOCKETS (AV)

Connect the audio/video out sockets of exter-

nal equipment to these sockets.

S-VIDEO/AUDIO IN SOCKETS (SAV)

Connect the video out socket of an S-VIDEO

VCR to the S-VIDEO socket.

Connects the audio out sockets of the S-

VIDEO VCR to the audio sockets as in AV.

AUDIO

L / MOLO

VIDEO

S-VIDEO

AV3

AUDIO

L / MOLO

VIDEO

S-VIDEO

AC IN

DVI P C

REMOTE

CONTROL

RS-232C

OUT

RS-232C

RGB PC

PC AUDIO IN

VIDEO IN

ANT IN

COMPONENT1

COMPONENT2

(480i/576i)

AUDIO IN

AUDIO

OUT

VIDEO

Back panel

5 6

Basic Operation

On and off

1. Press the main power button to switch the set on.

2. If the set is in standby mode, press the POWER, TV/AV, PR +/-

, INPUT, or NUMBER buttons on the remote control to switch it

on fully.

3. Press the POWER button on the remote control.

The set reverts to standby mode.

4. Press the main power button again to switch the set off.

Note : If, while the set is switched on, the mains plug is discon-

nected the set will switch to standby or power on when the mains

plug is replaced in the mains power socket.

Programme selection

You can select a programme number with the PR +/- or NUMBER

buttons.

Volume adjustment

Press the VOL +/- button to adjust the volume.

Quick view

Press the Q.VIEW button to view the last programme you were

watching.

Note : This function works only when Favourite programme is

set to Off . Otherwise each press of this button will select a stored

favourite programme.

Mute function

Press the MUTE button. The sound is switched off and the display

appears.

You can cancel it by pressing the MUTE, VOL +/-, I/II or SSM but-

ton.

On screen language selection

The menu can be displayed on the screen in your desired lan-

guage. First select your language.

1. Press the MENU button and then

button to select the

SPECIAL menu.

2. Press the

button and then

button to select

Language.

3. Press the

button and then the

button to select your

desired language.

All the on screen displays will appear in the selected language.

4. Press the MENU button to save.

INPUT

SSM

SWAP

PIP INPUT

I/II

POWER

MUTE

Q.VIEW

On Screen Menus

The dialogue between you and your set takes place on screen with

an operator menu.

Menu selection

1. Press the MENU button and then

button to display each

menu.

2. Press the

button and then the

button to select a menu

item.

3. Repeatedly press the MENU button to return to normal TV

viewing.

Note : In the teletext mode, menus are not displayed.

STATION menu PICTURE menu

Auto programme

Manual programme

Programme edit

Favourite programme

PIP/POP/PBP menu

SCREEN menu

SOUND menu

TIMER menuSPECIAL menu

STATION

Prev.

PSM

ACC

PICTURE

Prev.

SSM

Balance

AVL

SRS WOW

SOUND

Prev.

Clock

Off time

On time

Auto off

TIMER

Prev.

Input

Child lock

Language

Power indicator

Transparency

Zoom

Reset

SPECIAL

Prev.

ARC

Auto-configure

Clock

Phase

Position

SCREEN

Prev.

On/Off

Source

Size

Image

Sound

Position

Swap

PIP/POP/PBP

Prev.

STATION Menu

Up to 100 (only china : 200) TV stations can be stored in this set by

programme numbers (0 to 99(only china :0 to 199)). Once you have

preset the stations, you will be able to use the

or NUMBER

buttons to scan the stations you programmed.

Stations can be tuned using automatic or manual modes.

Auto programme tuning

All stations that can be received are stored by this method. It is rec-

ommended that you use auto programme during installation of this set.

1. Press the MENU button and then

button to select the

STATION menu.

2. Press the

button and then

button to select Auto

Programme

3. Press the

button. Select a TV system with the

button and

then

button on the System menu;

BG : (Asia/New Zealand/M.East/Africa/Australia)

I : (Hong Kong/South Africa)

DK : (East Europe/China/Africa/CIS)

M : (USA/Korea/Philippines) (This feature is not available in

all countries.)

4. Press the OK button.

5. Press the

button to select Storage from. And press the

button. Select the beginning programme number with the

button or NUMBER buttons on the Storage from menu.

6. Press the OK button.

7. Press the

button to select Start.

8. Press the

button to begin auto programming.

All receivable stations are stored. The station name is stored for

stations which broadcast VPS (Video Programme Service),

PDC (Programme Delivery Control) or TELETEXT data. If no

station name can be assigned to a station, the channel number

is assigned and stored by a number as shown below.

To stop auto programming, press the MENU button.

When auto programming is completed, the

Programme edit

menu appears on the screen. See the ‘Programme edit’ section

to edit the stored programme.

9. Repeatedly press the MENU button to return to normal TV

viewing.

STATION menu

STATION

Prev.

Auto programme

Manual programme

Programme edit

Favourite programme

System

Storage from

Start

Prev.

11 CO5 17%

V/UHF

1 ~ 75

1 ~ 69

2 ~ 83

Cable

2 ~ 44

1 ~ 47

1 ~ 71

V/UHF

1 ~ 69

1 ~ 62

2 ~ 83

Cable

1 ~ 47

1 ~ 41

1 ~ 71

V/UHF

1 ~ 69

2 ~ 83

Cable

1 ~ 47

1 ~ 71

AUSTRALIA CHINA ELSE

STATION menu

STATION

Prev.

Auto programme

Manual programme

Programme edit

Favourite programme

STATION Menu

Manual programme tuning

Manual programme lets you manually tune and arrange the sta-

tions in whatever order you desire. Also you can assign a station

name with five characters to each programme number.

1. Press the MENU button and then

button to select the

STATION menu.

2. Press the

button and then

button to select

Manual

Programme

3. Press the

button and then

button to select

System

4. Select a TV system with the

button and then

button on

the System menu;

BG : (Asia/New Zealand/M.East/Africa/Australia)

I : (Hong Kong/South Africa)

DK : (East Europe/China/Africa/CIS)

M : (USA/Korea/Philippines) (This feature is not available in

all countries.)

5. Press the OK button.

6. Press the

button to select Storage.

And press the

but-

ton.

Select the beginning programme number with the

button or NUMBER buttons on the Storage menu.

7. Press the OK button.

8. Press the

button to select Channel.

9. Press the

button and then

button to select VHF/UHF

or Cable on the Channel menu.

Then press the

button.

You can select the desired channel number with the NUMBER

buttons. If possible, select the channel number directly with the

number buttons. Refer to page 10.

10. Press the OK button.

11. Press the

button to select Search.

12. Press the

button.

13. Press the OK button to store it.

14. To store another station, repeat steps 3 to 12.

15. Repeatedly press the MENU button to return to normal TV

viewing.

System

Storage

Channel

Name

Fine tune

Prev.

System

Storage

Channel

Name

Fine tune

Prev.

System

Storage

Channel

Name

Fine tune

Prev.

V/UHF

STATION menu

STATION

Prev.

Auto programme

Manual programme

Programme edit

Favourite programme

STATION Menu

Assigning a station name

1. Repeat the ‘Manual programme tuning’ steps 1 to 2.

2. Press the

button and then

button to select Name.

3. Press the

button and then use the

. You can use a blank,

+, -, the number 0 to 9 and the alphabet A to Z.

With the

button you can select in the opposite direction.

4. Select the position by pressing the

button and then make

your choice of the second character, and so on.

5. Press the OK button to store it.

6. Repeatedly press the MENU button to return to normal TV

viewing.

Fine tuning

Normally fine tuning is only necessary if reception is poor.

1. Repeat the ‘Manual programme tuning’ steps 1 to 2.

2. Press the

button and then

button to select Fine tune.

3. Press the

button to fine tune for the best picture and sound.

4. Press the OK button.

5. Repeatedly press the MENU button to return to normal TV

viewing.

The finely tuned programme will be indicated by yellow number

during programme selection.

System

Storage

Channel

Name

Fine tune

Prev.

C 0 1

System

Storage

Channel

Name

Fine tune

Prev.

GG GG GG

STATION menu

STATION

Prev.

Auto programme

Manual programme

Programme edit

Favourite programme

STATION Menu

Programme edit

This function enables you to delete or skip the stored programmes.

Also you can move some stations to other programme numbers or

copy a blank station data into the selected programme number.

1. Press the MENU button and then use

button to select the

STATION menu.

2. Press the

button and then

button to select

Programme edit.

3. Press the

button to display the Programme edit menu.

Deleting a programme

1. Select a programme to be deleted with the

but-

ton.

2. Press the RED button twice.

The selected programme is deleted, all the following pro-

grammes are shifted up one position.

Copying a programme

1. Select a programme to be copied with the

but-

ton.

2. Press the GREEN button.

All the following programmes are shifted down one position.

Moving a programme

1. Select a programme to be moved with the

but-

ton.

2. Press the YELLOW button.

3. Move the programme to the desired programme number with

the

button.

4. Press the YELLOW button again to release this function.

Skipping a programme number

1. Select a programme number to be skipped with the

button.

2. Press the BLUE button. The skipped programme turns to blue.

3. Press the BLUE button again to release the skipped pro-

gramme.

When a programme number is skipped it means that you will be

unable to select it using the

button during normal TV

viewing. If you want to select the skipped programme, directly

enter the programme number with the NUMBER buttons or

select it in the programme edit or table menu.

Repeatedly press the MENU button to return to normal TV viewing.

PIP PR-

PIP PR+ SWAP

PIP INPUT

0 C 05 1 C 05 2 C 05 3 C 05

4 - - - - - 5 - - - - - 6 - - - - - 7 - - - - -

9 - - - - - 10 C 05 11 C 05 12 C 05

13 C 05 14 C 05 15 - - - - - 16 - - - - -

16 - - - - - 17 - - - - - 18 - - - - - 19 - - - - -

Prev.

Delete

Copy

Move

Skip

STATION Menu

Favourite programme

This function lets you select your favourite programmes directly.

Press the MENU button and then

button to select the

STATION menu.

2. Press the

button and then

to select

Favourite pro-

gramme

3. Press the

button a

nd then

button to select

Off

4. Press the

button to select -- -----.

5. Select a desired programme with the

button.

6. To store another programme, repeat steps 4 to 5.

You can store up to 8 programmes.

Press the MENU button to return to normal TV viewing.

Repeatedly press the Q.VIEW button to select stored favourite pro-

grammes.

Calling the programme table

You can check the programmes stored in the memory by displaying

the programme table.

Displaying programme table

Press the LIST button to display the Programme table menu.

The programme table appears on the screen.

Note :

a. You may find some blue highlighted programmes shown. They

have been set up in the programme edit mode.

b. Some programmes with the channel number shown in the pro-

gramme table indicate there is no station name assigned.

Selecting a programme in the programme table

Select a programme with the

button.

Then press the OK button.

The set switches to the chosen programme number.

Paging through a programme table

There are 10 programme table pages in which contain 199 pro-

grammes.

Pressing the

button repeatedly turns the pages.

Repeatedly press the MENU button to return to normal TV viewing.

Q.VIEWLIST

STATION menu

STATION

Prev.

Auto programme

Manual programme

Programme edit

Favourite programme

-- -----

0 C 05 1 C 05 2 C 05 3 C 05

4 - - - - - 5 - - - - - 6 - - - - - 7 - - - - -

9 - - - - - 10 C 05 11 C 05 12 C 05

13 C 05 14 C 05 15 - - - - - 16 - - - - -

16 - - - - - 17 - - - - - 18 - - - - - 19 - - - - -

PROGRAMME LIST

PICTURE Menu

PSM (Picture Status Memory)

1. Press the MENU button and then

button to select the PIC-

TURE menu.

2. Press the

button and then

button to select PSM.

3. Press the

button and then

button to select a picture set-

ting on the PSM menu.

4. Press the MENU button to save.

You can also recall a desired picture (Dynamic, Standard,

Mild, Game or User) with PSM button on the remote control. The

picture

Dynamic, Standard, Mild and Game are programmed

for optimum picture reproduction at the factory and cannot be

changed.

Picture adjustment

You can adjust picture contrast, brightness, colour intensity, sharp-

ness and tint (NTSC only) to the levels you prefer.

1. Press the MENU button and then

button to select the

PICTURE menu.

2. Press the

button and then

button to select PSM.

3. Press the

button and then

button to select User.

4. Press the

button and then

button to select the desired

picture option. (

Contrast, Brightness, Color, Sharpness

and Tint)

5. Press the

button to make appropriate adjustments.

6. Press the MENU button to save.

PSM

PICTURE menu

PICTURE

Prev.

PSM

ACC

Dynamic

Standard

Mild

Game

User

PICTURE

Prev.

PSM

ACC

Dynamic

Standard

Mild

Game

User

PICTURE

Prev.

PSM

ACC

Contrast

Brightness

Color

Sharpness

Tint

Contrast 100 FG

ACC

To initialize values (reset to default settings), select the Normal

option.

1. Press the MENU button and then

button to select the

PICTURE menu.

2. Press the

button and then

button to select ACC.

3. Press the

button and then

button to select Warm,

Normal

or Cool.

4. Press the MENU button to save.

XD is LG Electronic’s unique picture improving technology to dis-

play a real HD source though an advanced digital signal process-

ing algorithm.

XD Demo - Use to see the difference between XD Demo On and

XD Demo Off.

1. Press the MENU button and then

button to select the

PICTURE menu.

2. Press the

button and then

button to select XD.

3. Press the

button and then

button to select Off, On or

XD Demo.

4. Press the MENU button to save Off or On.

Press the EXIT button to stop XD Demo.

PICTURE

Prev.

PSM

ACC

PICTURE Menu

PICTURE menu

Off

XD Demo

PICTURE

Prev.

PSM

ACC

Warm

Normal

Cool

PICTURE

Prev.

PSM

ACC

SOUND menu

SSM

Balance

AVL

SRS WOW

SOUND

Prev.

SOUND Menu

SSM (Sound Status Memory)

You can select your preferred sound setting; Flat, Music, Movie or

Speech and you can also adjust the sound frequency of equalizer.

1. Press the MENU button and then

button to select the

SOUND menu.

2. Press the

button and then

button to select SSM.

3. Press the

button and then

button to select a sound set-

ting on the

SSM menu.

Sound Frequency Adjustment

a. Press the OK button in

User.

b. Select a sound band by pressing the

button.

c. Make appropriate sound level with the

button.

d. Press the OK button to store it for the sound

User.

4. Press the MENU button to save.

You can also recall a desired sound setting (

Flat, Music, Movie,

Speech or User) with SSM button on the remote control. The

sound settings

Flat, Speech, Movie and Music are programmed

for optimum sound reproduction at the factory and cannot be

changed.

Note : If you press the SSM button after making appropriate adjust-

ment on the User sub menu, the display User automatically

appears even though you have already set a factory preset setting;

Flat, Music, Movie or Speech.

SSM

Flat

Music

Movie

Speech

User

SOUND

Prev.

SSM

Balance

AVL

SRS WOW

Equalizer

0.1 0.5 1.0 5 .0 10.0

Khz

Prev.

Sound adjustment

You can adjust balance, AVL (Auto Volume Leveler). AVL automat-

ically keeps on an equal volume level even if you change pro-

grammes.

1. Press the MENU button and then

button to select the

SOUND menu.

2. Press the

button and then

button to select the desired

sound item; Balance or AV L .

3. Balance: Make desired adjustment with the

and then

press the OK button.

AV L : Press the

button to select Off or On.

4. Press the MENU button to save.

SRS WOW

The SRS WOW function plays back the mono or stereo sound input

with the dynamic surround effects. It will provide rich and profound

sound tone. If you set the SRS WOW on, user audio setting can not

be adjusted.

1. Press the MENU button and then

button to select the

SOUND menu.

2. Press the

button and then

button to select SRS WOW.

3. Press the

button and then

button to select Off or On.

4. Press the MENU button to save

SOUND menu

SSM

Balance

AVL

SRS WOW

SOUND

Prev.

SOUND Menu

Off

SOUND

Prev.

SSM

Balance

AVL

SRS WOW

Off

SOUND

Prev.

SSM

Balance

AVL

SRS WOW

is a trademark of SRS Labs, Inc.

technology is incorporated under license from SRS Labs, Inc.

SOUND menu

SSM

Balance

AVL

SRS WOW

SOUND

Prev.

SOUND Menu

Stereo/Dual reception

When a programme is selected, the sound information for the sta-

tion appears after the programme number and station name disap-

pear.

Mono sound selection

In stereo reception if the stereo signal is weak, you can switch to

mono by pressing the I/II button twice. In mono reception the depth

of sound is improved. To switch back to stereo, press the I/II button

twice again.

Language selection for dual language broadcast

If a programme received in two languages (dual language), you can

switch to DUAL I, DUAL II or DUAL I+II by pressing the I/II but-

ton repeatedly.

DUAL I sends the primary broadcast language to the loudspeak-

ers.

DUAL II sends the secondary broadcast language to the loud-

speakers.

DUAL I+II sends a separate language to each loudspeaker.

NICAM reception

If your set is equipped with the receiver for NICAM reception, the

high quality NICAM (Near Instantaneous Companding Audio

Multiplex) digital sound can be received.

Sound output can be selected according to the type of received

broadcast as follows by pressing the I/II button repeatedly.

1. When NICAM mono is received, you can select NICAM

MONO

or FM MONO.

2. When NICAM stereo is received, you can select NICAM

STEREO

or FM MONO. If the stereo signal is weak, switch to

FM mono.

3. When NICAM dual is received, you can select NICAM DUAL

, NICAM DUAL II or NICAM DUAL I+II or MONO.

Sound output selection

Component1, Component2 mode, you can select output sound for

the left and right loudspeakers.

Repeatedly press the I/II button to select the sound output.

L+R : Audio signal from audio L input is sent to the left loud

speaker and audio signal from audio R input is sent to the

right loud speaker.

L+L : Audio signal from audio L input is sent to left and right loud-

speakers.

R+R : Audio signal from audio R input is sent to left and right loud-

speakers.

I/II

Broadcast

Mono

Stereo

Dual

On Screen Display

MONO

STEREO

DUAL I

Clock

You must set the time correctly before using on/off time function.

1. Press the MENU button and then

button to select the

TIMER menu.

2. Press the

button and then

button to select Clock.

3. Press the

button and then

button to adjust the hour.

4. Press the

button and then

button to adjust the minute.

5. Press the

button and then

button to select AM or PM.

6. Press the MENU button to save.

On/Off time

The off timer automatically switches the set to standby at the pre-

set time.

1. Press the MENU button and then

button to select the

TIME menu.

2. Press the

button and then

button to select Off time or

On time.

3. Press the

button and then

button to adjust the hour.

4. Press the

button and then

button to adjust the minute.

5. Press the

button and then

button to adjust the morn-

ing(AM)or afternoon(PM).

6. Press the

button and then

button to select On or Off.

To cancel Off/On time function, press the

button to

select Off.

7. Only On Time function: Press the

button and then

button to select the programme at turn-on and then press the

button and then

button to adjust volume level.

8. Press the MENU button to save.

Note :

a. In the event of power interruption (disconnection or power fail-

ure), the clock must be reset.

b. Two hours after the set is switched on by the on time function it

will automatically switch back to standby mode unless a button

has been pressed.

c. Once the on or off time is set, these functions operate daily at

the preset time.

d. Off Time function overrides On Time function if they are set to

the same time.

e. The set must be in standby mode for the On Time to work.

TIMER menu

Clock

Off time

On time

Auto off

TIMER

Prev.

TIMER Menu

TIMER

Prev.

Clock

Off time

On time

Auto off

Time

561 AM

TIMER

Prev.

Clock

Off time

On time

Auto off

Time

Volume

__ __

Off

Pr.

__ __

Page is loading ...

LG RT-42LZ30 User manual

Brand: LG

Model: RT-42LZ30

Category: LCD TVs

Type: User manual

This manual is also suitable for

42LZ30

Download PDF

report

LG RT-42LZ30 User manual

This manual is also suitable for

LG RT-42LZ30 User manual

Related papers

Other documents