Model
Language
Page
Size(W*H)
Designer
Designer
Confirm
Color(cover/body)
Description
Date
No. Date
Chage Record
Change content
ECO No.
1
2
3
4 add customer name ACTT904024 09.07.03 ZXL CUIYT
5
6
7
8
9
Weight 100g
2009.07.03
V-CQ2*****
6
3828FI2856F
2/1
150 x 220(mm)
Zhang Xianli
Owner's manual
Material
Part No.
English
V-CQ243***
V-CQ253***
V-CQ263***
V-CQ264***
V-CQ273***
V-CQ283***
8
9
3
3
2
1
1
2
2
4
5
27
•Electronic power control(26)
OFF:Power off MIN:Low power
MAX:Full power
Park-System(16)
For short breaks during vacuuming, for
example to move a small piece of furniture
or a rug, use the
Park system to support
the flexible hose and cleaning head.
•
Slide the hook attached to the large cleaning
tool into the slot on the rear of the appliance.
Storage(17)
When you have switched off and unplugged
the appliance, press the button (11) to
automatically rewind the cord.
You can move or store your appliance in a
vertical position by sliding the hook on the
large cleaning head into the clip on the
underside of the appliance.
Changing the dust bag
The dustbag needs changing when the
cleaner is set to maximum power and the
cleaner head is off the floor but the
indicator window(18) is completely coloured
red.
Even if the dustbag does not appear to be
full at this stage, it should be changed, as
very fine dust can clog up the pores of the
dust bag.
• Turn off the appliance and unplug it.
• Open the cover by pressing the hook(19)
and lifting it up until it snaps into place.
Your appliance is equipped with either a
paper dust bag (20) or a cloth paper (28)
or a fabric dust bag (25).
(depending on model)
• Take hold of the dust bag by the handle
and pull. Remove the bag and throw it
away.
• To refit a new bag push the cardboard
support of a new bag into the bag mount
(21) until it will go no further.
If your appliance is fitted with a
fabric dust bag follow the same
instructions as above.
Empty it and replace it(25). Do not wash it.
Note: as the appliance is fitted with a safety
device which checks that the bag is in place
you cannot close the lid if the bag is not
fitted correctly.
Cleaning the motor filter
The motor filter is situated inside the
appliance between the dust bag and the
motor. Each time that you change the air
outlet filter we advise you to remove the
motor filter(22) and to clean it by tapping to
remove the dirt and then replacing it in the
vacuum cleaner.
Changing the air outlet filters
Depending on the model you have chosen
your appliance is equipped with different
types of filters : foam filter or electrostatic
r(24
• To change these filters remove the cover
of the filter compartment(23) situated at
the rear of the appliance.
•The foam filter should be cleaned
regularly by tapping it to remove the dirt.
•
•Wash the washable HEPA filter with water
at least once a year.
Check that the appliance is correctly plugged
in and that the electrical socket is working.
•Stop the appliance and unplug it.
• Check that the tubes, flexible hose and
cleaning tool are not blocked.
•Check that the dust bag is not full.Replace
if necessary.
•Check that the air outlet filter is not
blocked. Replace if necessary.
What to do if your appliance
does not work?
What to do when the suction
performance reduces?
"bag full"
5
.
P/No.: 3828FI2856F
http://www.lge.com/
-
1
-
2
-
3
-
4
-
5
-
6
-
7
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI