LG ND8520 Owner's manual

Category
Tuner
Type
Owner's manual
OWNER’S MANUAL
MUSIC IN STYLE
DOCKING SPEAKER
ND8520
Please read this manual carefully before operating
your set and retain it for future reference.
http://www.lg.com
ENGLISH
ND8520-FA.BRUSLLK_ENG.indd 1 12. 6. 26. �� 11:03
1 Getting Started
Safety Information
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK) NO
USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning ash with arrowhead
symbol within an equilateral triangle
is intended to alert the user to the
presence of uninsulated dangerous
voltage within the product’s
enclosure that may be of sucient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature accompanying the
product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING: Do not install this equipment in a
conned space such as a book case or similar unit.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon
a dedicated circuit;
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specication page of this
owners manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or re. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an
exact replacement part by an authorized service
center. Protect the power cord from physical or
mechanical abuse, such as being twisted, kinked,
pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and
the point where the cord exits the appliance. To
disconnect power from the mains, pull out the
mains cord plug. When installing the product,
ensure that the plug is easily accessible.
This device is equipped with a portable battery or
accumulator.
Safety way to remove the battery or the
battery from the equipment: Remove the
old battery or battery pack, follow the steps
in reverse order than the assembly. To prevent
contamination of the environment and bring on
possible threat to human and animal health, the
old battery or the battery put it in the appropriate
container at designated collection points. Do
not dispose of batteries or battery together with
other waste. It is recommended that you use
local, free reimbursement systems batteries and
accumulators. The battery shall not be exposed to
excessive heat such as sunshine, re or the like.
CAUTION: The apparatus shall not be exposed to
water (dripping or splashing) and no objects lled
with liquids, such as vases, shall be placed on the
apparatus.
Getting Started2
Getting Started
1
ND8520-FA.BRUSLLK_ENG.indd 2 12. 6. 26. �� 11:03
Getting Started 3
Getting Started
1
Disposal of your old appliance
1. When this crossed-out wheeled bin
symbol is attached to a product it
means the product is covered by
the European Directive 2002/96/EC.
2. All electrical and electronic products
should be disposed of separately
from the municipal waste stream
via designated collection facilities
appointed by the government or
the local authorities.
3. The correct disposal of your
old appliance will help prevent
potential negative consequences
for the environment and human
health.
4. For more detailed information about
disposal of your old appliance,
please contact your city office,
waste disposal service or the shop
where you purchased the product.
Disposal of waste batteries/accumulators
1. When this crossed-out wheeled
bin symbol is attached to batteries/
accumulators of Your product
it means they are covered by
European Directive 2006/66/EC.
2. This symbol may be combined with
chemical symbols for mercury(Hg),
cadmium(Cd) or lead(Pb) if the
battery Contains more that 0.0005%
of mercury,0.002% of cadmium or
0.004% of lead.
3. All batteries/accumulators should
be disposed separately from
the municipal waste stream via
designated collection facilities
appointed by the government or
the local authorities.
4. The correct disposal of Your old
batteries/accumulators will help
to prevent potential negative
consequences for the environment,
animal and human health.
5. For more detailed information
about disposal of Your old batteries/
accumulators, please contact Your
city office, waste disposal service or
the shop where You purchased the
product.
The equipment complies with requirements of the
Technical Regulation, in terms of restrictions for the
use of certain dangerous substances in electrical
and electronic equipment.
ND8520-FA.BRUSLLK_ENG.indd 3 12. 6. 26. �� 11:03
Table of Contents4
Table of Contents
1 Getting Started
2 Safety Information
5 Main Features
5 Made for iPod/iPhone/iPad
5 – AirPlay®
5 Portable In
5 USB Playback
5 – Alarm
5 – Radio(FM)
5 Time Sync
5 LG Bluetooth Remote
5 Accessories
5 Introduction
5 Symbol Used in This Manual
6 Playable File Requirement
6 MP3/WMA Music File Requirement
6 Compatible USB Devices
6 USB Device Requirement
7 Remote Control
8 Front Panel
8 Back Panel
9 Top Panel
9 How to Affix the Ferrite Core
10 Control Panel
11 Setting the Clock
11 Setting the Clock Automatically
11 Setting the Clock Manually
2 Operating
12 Basic Operations
12 – iPod/iPhone/iPad Operation
12 Compatible iPod/iPhone/iPad
13 Using AirPlay
23 USB Operation
24 Listening to Music from Your External
Device
25 Radio Operations
25 Antenna Connection
25 Listening to the Radio
25 Presetting the Radio Stations
25 Deleting All the Saved Stations
25 Improving Poor FM Reception
26 Using a Bluetooth Wireless Technology
26 Listening to Music of a Bluetooth
Device
27 Using Bluetooth App
29 Other Operations
29 Using Your Unit as an Alarm Clock
29 Activate and Deactivate the Alarm
Timer
29 Stop Alarm Ring
29 – Snoozing
29 Resume Playback
30 Playing Repeatedly or Randomly
(USB only)
30 – Dimmer
30 Sleep Timer Setting
30 Setting the Sound Mode
30 Turning off the Sound Temporarily
3 Troubleshooting
31 Troubleshooting
4 Appendix
32 Trademarks and Licenses
32 Handling the Unit
33 Specifications
ND8520-FA.BRUSLLK_ENG.indd 4 12. 6. 26. �� 11:03
Getting Started 5
Getting Started
1
Main Features
Made for iPod/iPhone/iPad
Enjoys music from iPod/iPhone/iPad with simple
connection.
AirPlay®
Portable In
Listens to music from your portable device.
USB Playback
Enjoys music from USB with simple connection.
Alarm
Sets alarm which go o at desired time.
Radio(FM)
Listens to the radio.
Time Sync
Sets this unit’s clock automatically by connecting
iPod/iPhone/iPad or by activating Bluetooth
connection through “LG Bluetooth Remote” app.
LG Bluetooth Remote
You can control this unit with your iPod touch/
iPhone/iPad or Android device via Bluetooth. This
unit and your device must be paired for Bluetooth.
Visit Apple App Store” or “Google Android Market
(Google Play Store)” or use the QR code shown
below to search for “LG Bluetooth Remote app. For
detailed information, refer to page 27-28.
(Android OS) (Apple iOS)
Accessories
Please check and identify the supplied accessories.
Remote control (1) Battery (1)
FM antenna (1) Stand for iPad (1)
Ferrite Core (1)
Introduction
Symbol Used in This Manual
,
Note
Indicates special notes and operating features.
>
Caution
Indicates cautions for preventing possible damages
from abuse.
ND8520-FA.BRUSLLK_ENG.indd 5 12. 6. 26. �� 11:03
Getting Started6
Getting Started
1
Playable File
Requirement
MP3/WMA Music File
Requirement
MP3/ WMA le compatibility with this unit is limited
as follows :
• Samplingfrequency:within32to48kHz(MP3),
within 32 to 48 kHz (WMA)
• Bitrate:within32to320kbps(MP3),
40 to 192 kbps (WMA)
• Maximumles:Under999
• Maximumfolders:Under99
• Fileextensions:.mp3”/.wma”
Compatible USB Devices
• MP3Player:FlashtypeMP3player.
• USBFlashDrive:
Devices that support USB1.1.
• TheUSBfunctionofthisunitdoesnotsupport
all USB devices.
USB Device Requirement
• Deviceswhichrequireadditionalprogram
installation when you have connected it to a
computer, are not supported.
• DonotextracttheUSBdevicewhilein
operation.
• ForalargecapacityUSB,itmaytakelongerthan
a few minutes to be searched.
• Topreventdataloss,backupalldata.
• IfyouuseaUSBextensioncableorUSBhub,the
USB device is not recognized.
• UsingNTFSlesystemisnotsupported.(Only
FAT(16/ 32) le system is supported.)
• Thisunitisnotsupportedwhenthetotal
number of les is 1 000 or more.
• ExternalHDD,Cardreaders,Lockeddevices,or
hard type USB devices, mobile phone are not
supported.
• USBportoftheunitcannotbeconnectedto
PC. The unit cannot be used as a storage device.
• SomeUSBmaynotworkwiththisunit.
• ThisunitcanchargeiPod/iPhonebyconnecting
it to USB port in power on.
• ThisunitcannotchargeiPadbyconnectingitto
USB port even in power on.
• WhenyouconnectsmartphonebyusingUSB
port, you can only charge it in power on. (Some
smart phone may not be charged.)
ND8520-FA.BRUSLLK_ENG.indd 6 12. 6. 26. �� 11:03
Getting Started 7
Getting Started
1
Remote Control
1
(POWER) : Switches the unit ON or OFF.
SLEEP : Sets the sleep timer.
P
FUNCTION : Selects the function and input
source.
+/- (Volume) : Adjusts speaker volume.
SOUND EFFECT : Chooses sound impressions.
/ (Skip/Search) :
-
Skips Fast backward or Forward.
-
Searches for a section within a le.
(Play/Pause) : Starts or pauses playback.
@
: Mutes the sound.
h
: Selects a play mode. (ONE/DIR/ALL/
RAND(RANDOM)/OFF) (USB only)
FOLDER/PRESET
W
/
S
:
-
Selects the folder or le you want to play.
(USB only)
-
Chooses a preset number for a radio station.
MEMORY :
-
Stores the preset stations.
-
Deletes the preset stations.
The battery used in this device may present a
re or chemical burn hazard if mistreated. Do
not recharge, disassemble, incinerate, or heat
above 100 °C (212 °F). Replace the battery part
no. CR2025 only. Use of another battery may
present a risk of re or explosion. Dispose of
used battery. Keep battery away from children.
Do not disassemble or dispose of in re.
>
Caution
Battery Installation
1. Turn the battery compartment lid
counterclockwise by using a coin. Then take the
battery compartment lid out.
2. Insert and fix the battery with the plus(+) facing
in the same direction as the plus(+) on the
battery compartment lid.
3. Put the battery compartment lid on the remote
control and turn it clockwise to close.
Do not open the battery compartment lid by
using your nger. Or else, your nail would be
broken.
>
Caution
ND8520-FA.BRUSLLK_ENG.indd 7 12. 6. 26. �� 11:03
Getting Started8
Getting Started
1
Front Panel
Back Panel
a 1
Switches the unit ON or OFF.
b
Remote Sensor
c
Control panel
d
Speaker
This unit has a built-in subwoofer at the
bottom.
a
Speaker duct
Be careful to make sure children not to put
their hands or any objects into the speaker
duct.
>
Caution
b
AC power cord
c
FM ANT.
d
PORT.IN (3.5 mm)
Listens to music from your portable device.
e
USB Port
Plays music le by connecting the USB device.
f
Alarm On/O
- Sets the alarm timer.
- Turns o the alarm.
- Displays alarm setting.
g
Clock
Sets the clock and checks the time.
ND8520-FA.BRUSLLK_ENG.indd 8 12. 6. 26. �� 11:03
Getting Started 9
Getting Started
1
Top Panel
a
iPod/iPhone/iPad Dock
Connects an iPod/iPhone/iPad.
How to Affix the Ferrite Core
You must affix a core (supplied with the model you purchased) in order to reduce or eliminate electrical
interference.
1. Pull the stopper [a] of the ferrite core to open.
2. Wind the power cord around the ferrite core once.
3. Close the ferrite core until it clicks.
ND8520-FA.BRUSLLK_ENG.indd 9 12. 6. 26. �� 11:03
Getting Started10
Getting Started
1
Control Panel
y
Switch function :
Taps
P
or swipes left or right with your nger.
Selects the function and input source.
(IPOD/BT(Bluetooth)/PORT/FM/USB/AIR)
y
Skip/Search :
-
Skips Fast backward or Forward.
-
Searches for a section within a le.
y
Up/Down :
-
Selects the folder or le you want to play.
(USB only)
-
Chooses a preset number for a radio station.
y
:
-
Connects this unit to a Wi-Fi network.
-
Appears only in AIR mode.
y
Play/Pause :
-
Taps the center position to play back or pause.
-
Selection.
y
-/+ (Volume) :
Adjusts speaker volume.
ND8520-FA.BRUSLLK_ENG.indd 10 12. 6. 26. �� 11:03
Getting Started 11
Getting Started
1
Setting the Clock
If the power has been interrupted or the
power plug has been disconnected, the clock
setting is erased.
,
Note
Setting the Clock
Automatically
y
Make sure that your iPod/iPhone/iPad
or your Android device has set the clock
correctly.
y
In standby mode, the clock will not
synchronize with your iPod/iPhone/iPad or
your Android device.
y
In auto clock synchronization, “LG Bluetooth
Remote” app has priority over the docking
system.
y
The 24 hour format can be set only for
Android OS.
,
Note
Setting the Clock by Synchronizing
with Your iPod/iPhone/iPad
Connect the iPod/iPhone/iPad rmly. Then the
clock setting in the control panel will synchronize
with your iPod/iPhone/iPad.
The synchronized time may be slightly
different from that of your iPod/iPhone/iPad.
,
Note
Setting the Clock through “LG
Bluetooth Remote” App
Install “LG Bluetooth Remote app on your iPod
touch/iPhone/iPad or your Android device. (see
page 27-28)
Your unit’s clock will be automatically synchronized
with your device by activating Bluetooth
connection through “LG Bluetooth Remote” app.
Setting the Clock Manually
If necessary, you can set the clock manually.
1. Press and hold Clock on the back panel for two
seconds.
-
The clock digits begin to blink.
2. Press / to select the 12/24 hour format.
-
12:00 (for a PM display) or 0:00 (for a 24 hour
display)
3. Press .
-
The hour digits begin to blink.
4. Press / to set the hour.
5. Press .
-
The minutes digits begin to blink.
6. Press / to set the minute.
7. Press .
If you want to reset the clock, repeat steps 1-7.
,
Note
ND8520-FA.BRUSLLK_ENG.indd 11 12. 6. 26. �� 11:03
2 Operating
Operating12
Operating
2
Basic Operations
iPod/iPhone/iPad Operation
You can enjoy the sound from your iPod/iPhone/
iPad through this unit. For details about iPod/
iPhone/iPad, refer to the iPod/iPhone/iPad User
Guide.
y
You are recommended to remove the case
for your iPod/iPhone/iPad before you place
your iPod/iPhone/iPad into the dock.
y
Install the supplied stand for iPad to keep
iPad stable before you place the iPad.
,
Note
1. Connect the iPod/iPhone/iPad firmly. When this
unit is connected to power, your iPod/iPhone/
iPad is automatically turned on and starts
recharging even in standby mode.
2. Press
P
FUNCTION or
P
to select IPOD
function.
To Do this
Play
Press
Pause
During playback, Press
Skip
During playback, press /
to go to the next le or to return
to the beginning of the current
le.
During playback, press twice
briey to step back to the
previous le.
To Do this
Search
Press and hold / during
playback and release it at the
point you want to listen to.
Compatible iPod/iPhone/iPad
The unit supports the models as follows ;
y
iPod touch 1G, 2G, 3G, 4G
y
iPod nano 2G, 3G, 4G, 5G, 6G
y
iPhone 3G / iPhone 3GS
y
iPhone 4 / iPhone 4S
y
iPad / iPad 2
y
An error message “ERROR” appears when :
-
your iPod/iPhone/iPad is not connected
rmly.
-
this unit recognizes your iPod/iPhone/iPad
as an unknown device.
-
your iPod/iPhone/iPad is exceptionally low
in power.
/
The battery needs to be charged.
/
If you charge the battery while iPod/
iPhone/iPad is extremely low in power,
it may take longer to be charged.
y
You may not control your iPod/iPhone/iPad
from this unit due to malfunction of iPod/
iPhone/iPad.
y
Depending on your iPod/iPhone/iPad’s
software version, it may not be possible to
control your iPod/iPhone/iPad from this
unit. We recommend installing the latest
software version.
y
If you use an application, make a call, or
send and receive SMS text message, etc. on
iPod touch/iPhone/iPad, disconnect it from
iPod touch/iPhone/iPad dock of this unit
and then use it.
y
If you have a problem with your iPod/
iPhone/iPad, please visit www.apple.com/
support.
y
iPod touch, iPhone and iPad have any
dierence in operation other than iPod.
You may need any additional control to use
them with this unit. (e.g. “slide to unlock”)
,
Note
ND8520-FA.BRUSLLK_ENG.indd 12 12. 6. 26. �� 11:03
Operating 13
Operating
2
Using AirPlay
Apple AirPlay technology enables you to play your
iTunes music library, hosted on a Mac, PC, iPhone,
iPod touch, or iPad on any AirPlay-enabled device
(for example, your ND8520) connected to the Wi-Fi
network.
To stream audio wirelessly by AirPlay, you need :
y
A Wi-Fi certified router
y
A host for your iTunes music library, for example,
an iPod touch/iPhone/iPad installed with iOS
4.3.3 (or later) or a Wi-Fi enabled PC/Mac installed
with iTunes 10.2.2 (or later)
Compatible iPod/iPhone/iPad
The unit supports the models as follows ;
y
iPod touch 3G, 4G
y
iPhone 3GS
y
iPhone 4 / iPhone 4S
y
iPad / iPad 2
This unit should be connected to the same local
network as your iTunes host device through the
Wi-Fi router.
Connect to your home Wi-Fi network
for AirPlay
To connect this unit to your existing home
Wi-Fi network, you need to apply your home Wi-Fi
setting to this unit.
Once connected successfully, this unit will
remember your home Wi-Fi settings. Then you
can enjoy AirPlay whenever this unit is powered
on and connected to your home Wi-Fi network
automatically.
Before connection of this unit to your home Wi-Fi
network, check the points below.
1. Make sure that your Wi-Fi router is powered on
and working properly.
2. Make sure that this unit has been powered on
and booted up successfully.
Connecting to your home Wi-Fi
router
To connect this unit to a Wi-Fi router, you need
access to this unit’s built-in configuration web page
for change of its internal Wi-Fi settings. To do so,
you need a Wi-Fi enabled device with an Internet
browser for temporary Wi-Fi connection to this unit.
The Wi-Fi enabled device can be an iPod touch/
iPhone/iPad or a Wi-Fi enabled PC/Mac.
Follow the sequence below for connection of
this unit to your home Wi-Fi router
1. Collect settings of your home Wi-Fi router and
write down on paper for use during this unit Wi-
Fi setup (see “Collect settings of your home Wi-
Fi router on page 14).
2. Switch this unit to Assisted Wi-Fi Setup mode
(see “Switch this unit to Assisted Wi-Fi Setup
mode” on page 14).
-
A new Wi-Fi network created by this unit will
appear, with the network name (SSID) of “LG
AUDIO Setup XXXXXX”.
3. Connect your Wi-Fi enabled device to the
created new Wi-Fi network temporarily (see
“Connect your Wi-Fi enabled device to the
newly created Wi-Fi network” on page 15).
4. Open the built-in web page of this unit with the
Internet Browser of your Wi-Fi enabled device
(see “Open the built-in web page of this unit” on
page 17).
5. Connect your unit (ND8520) to the available
Wi-Fi network based on the settings you wrote
on paper at step 1 (see “Connect your unit
(ND8520) to the available Wi-Fi network” on
page 18).
6. Restore your Wi-Fi enabled device back to your
existing home Wi-Fi settings (see “Restore your
Wi-Fi enabled device back to your existing
home Wi-Fi setting on page 20).
ND8520-FA.BRUSLLK_ENG.indd 13 12. 6. 26. �� 11:03
Operating14
Operating
2
Collect settings of your home Wi-Fi
router
Always consult the user guide of your home
Wi-Fi router for detailed instructions.
,
Note
1. Connect your Wi-Fi enabled device to your
existing home Wi-Fi network.
2. Launch the Internet browser (for example,
Apple Safari or Microsoft Internet Explorer) on
your Wi-Fi enabled device.
3. Open the configuration page of your home
Wi-Fi router.
4. Find the Wi-Fi settings tab and write down the
following information on paper :
-
Network name (SSID)
-
Wi-Fi security mode (usually WEP, WPA or
WPA2 if enabled)
-
If the security mode of your home Wi-Fi
router is WEP, this unit supports only “OPEN”.
-
Wi-Fi password (if Wi-Fi security is enabled)
-
DHCP mode (enabled or disabled)
-
Static IP address settings (if DHCP mode is
disabled)
Switch this unit to Assisted Wi-Fi
Setup mode
1. Press
P
FUNCTION or
P
to select AIR
function.
2. Press and hold, and release on the control
panel of this unit until “STEP1” message appears.
-
Airplay icon blinks and “STEP1” message
appears on the control panel of this unit.
-
A new Wi-Fi network of this unit itself is
created, with the network name (SSID) of
“LG AUDIO Setup XXXXXX”.
-
It takes about 30 seconds and more for
successful creation of this new Wi-Fi network.
After you finish manual Wi-Fi setting for this
unit, this new Wi-Fi network disappears.
,
Note
ND8520-FA.BRUSLLK_ENG.indd 14 12. 6. 26. �� 11:03
Operating 15
Operating
2
Connect your Wi-Fi enabled device
to the newly created Wi-Fi network
The new Wi-Fi network created by this unit only
allows access of one Wi-Fi enabled device. To avoid
interference from any other Wi-Fi devices, you are
recommended to temporarily disable the Wi-Fi
function on your other Wi-Fi devices.
y
“LG AUDIO Setup XXXXXX” is the temporary
and assistant Wi-Fi network for connection
of this unit to your home Wi-Fi router.
y
While your iPod touch/iPhone/iPad or your
Wi-Fi enabled PC/Mac is connecting to “LG
AUDIO Setup XXXXXX” network, you can not
be able to use the Internet on them.
,
Note
Option 1 : Use your iPod touch/iPhone/iPad
1. Select “Settings” -> Wi-Fi” on your iPod touch/
iPhone/iPad.
2. Select “LG AUDIO Setup XXXXXX” from the list of
available networks.
-
“STEP2” message appears on the control
panel of this unit.
3. Wait until successful Wi-Fi connection on your
iPod touch/iPhone/iPad.
-
is displayed at the upper left corner of
your iPod touch/iPhone/iPad.
-
During this procedure, AirPlay icon keeps
blinking.
If “LG AUDIO Setup XXXXXX” is not in the list,
try to scan the available Wi-Fi networks again.
,
Note
ND8520-FA.BRUSLLK_ENG.indd 15 12. 6. 26. �� 11:03
Operating16
Operating
2
Option 2 : Use your Wi-Fi enabled PC/Mac
y
See the user guide of your PC/Mac for how
to connect your PC/Mac to a Wi-Fi network.
y
During Wi-Fi network connection, do not
connect any network cable to your PC/Mac.
,
Note
1. Open the Wi-Fi setup tool or control panel on
your PC/Mac.
2. Scan the available Wi-Fi networks.
3. Select “LG AUDIO Setup XXXXXX” from the list of
available networks.
-
“STEP2” message appears on the control
panel of this unit.
4. Wait until successful Wi-Fi connection on your
PC/Mac.
-
During this procedure, AirPlay icon keeps
blinking on the control panel of this unit.
If “LG AUDIO Setup XXXXXX” is not in the list,
try to scan the available Wi-Fi networks again.
,
Note
ND8520-FA.BRUSLLK_ENG.indd 16 12. 6. 26. �� 11:03
Operating 17
Operating
2
Open the built-in web page of this
unit
1. Launch Apple Safari browser or Microsoft
Internet Explorer browser on your Wi-Fi enabled
device.
2. Type in “192.168.1.111” at the browser address
bar and confirm.
-
This unit conguration web page is displayed.
If you use Safari on your Wi-Fi enabled PC/Mac,
you can also select “LG AUDIO XXXXXX“ from
the Bonjour pull-down list to enter the this unit
configuration web page directly.
1. Click “Safari” -> “Preferences”. (Mac)
Click “ “ -> “Preferences”. (PC)
-
The Bookmarks menu is displayed.
2. Tick “Include Bonjour for “Bookmarks bar.
3. Select “LG AUDIO XXXXXX“ from the Bonjour
pull-down list shown at the bookmarks bar.
-
This unit conguration web page is displayed.
ND8520-FA.BRUSLLK_ENG.indd 17 12. 6. 26. �� 11:03
Operating18
Operating
2
Connect your unit (ND8520) to the
available Wi-Fi network
1. Select your network name (SSID) from Wireless
Network.
2. Enter the network key if required.
3. Tap or click “OK to proceed with network
settings change.
-
Follow the on-screen instructions to change
and conrm the internal Wi-Fi settings of this
unit.
-
Please wait about 30 seconds and more.
4. If this unit is connected to your selected home
Wi-Fi network successfully,
-
AirPlay icon stops blinking and stays.
-
“CONN” message appears for a moment and
then AIR message appears on the control
panel.
If there’s any problem during network
connection, if this unit is failed to connect to
the Wi-Fi network, or if you enter the wrong
password, AirPlay icon blinks green and
“ERROR” message appears for a moment and
then AIR message appears on the control
panel of this unit. In these cases, try the
network connection from “Switch this unit to
Assisted Wi-Fi Setup mode” again.
,
Note
ND8520-FA.BRUSLLK_ENG.indd 18 12. 6. 26. �� 11:03
Operating 19
Operating
2
Change the internal Wi-Fi
settings of this unit
On this unit configuration web page, you can
change the internal Wi-Fi settings of this unit
for connection of this unit to your existing
home Wi-Fi network.
Make sure that the settings on the
configuration web page match your home
Wi-Fi network settings that you wrote on
paper.
A
Select a language for the configuration
web page.
B
Current Network : Display the current
connected network name (SSID).
Current IP Address : Display the current
connected IP address.
Software Version : Display the current
software version of this unit.
C
Device Name : If you like, you can keep the
default device name or modify the device
name by modifying the text in the text box.
Tap or click Apply to proceed with device
name change.
D
Wireless Network : Select your wireless
network and enter your network password
if applicable.
,
Note
E
If you want to enter the network name
(SSID) manually (for example, if you want
to hide your SSID), select “CONFIGURE
MANUALLY of Wireless Network.
F
If you want to set the advanced manual
settings, tap or click “[+] Advanced
Settings”.
G
Tap or click “OK to proceed with network
settings change.
ND8520-FA.BRUSLLK_ENG.indd 19 12. 6. 26. �� 11:03
Operating20
Operating
2
Restore your Wi-Fi enabled device
back to your existing home Wi-Fi
setting
y
“LG AUDIO Setup XXXXXX” is the temporary
and assistant Wi-Fi network for connection
of this unit to your home Wi-Fi router.
y
Your iTunes host device should be
connected to the same local network as this
unit through the Wi-Fi router.
y
Make sure that the settings at steps 2 to
3 below match your home Wi-Fi network
settings you wrote on paper.
,
Note
1. Select “Settings” -> Wi-Fi” on your iPod touch/
iPhone/iPad.
y
Or open the list of available Wi-Fi networks
on your PC/Mac.
2. Select your network name (SSID) from the list of
available wireless networks.
3. Enter the network key if required.
4. Wait until successful Wi-Fi connection to your
home Wi-Fi network.
Stream audio from your iTunes
music library to this unit
Make sure that your iTunes host device is
connected to the same Wi-Fi network as this
unit. Your iTunes device can be an iPod touch/
iPhone/iPad installed with iOS 4.3.3 (or later) or
a Wi-Fi enabled PC/Mac installed with iTunes
10.2.2 (or later).
,
Note
ND8520-FA.BRUSLLK_ENG.indd 20 12. 6. 26. �� 11:03
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34

LG ND8520 Owner's manual

Category
Tuner
Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI