Vestil LSC-2448-PT User manual

Type
User manual

Vestil LSC-2448-PT is a platform cart with a deck measuring 24in. x 48in. (61cm x 122cm) and a uniform static capacity of 500 pounds (227.3kg). It features 10in. 3½in. (25cm x 9cm) pneumatic tires, a molded plastic handle coupler, and an easy-to-assemble design. This cart is suitable for various material handling tasks, including transporting loads in warehouses, factories, and other industrial settings. Its compact size and maneuverability make it ideal for navigating narrow aisles and congested areas. The pneumatic tires provide a smooth ride, even on uneven surfaces.

Vestil LSC-2448-PT is a platform cart with a deck measuring 24in. x 48in. (61cm x 122cm) and a uniform static capacity of 500 pounds (227.3kg). It features 10in. 3½in. (25cm x 9cm) pneumatic tires, a molded plastic handle coupler, and an easy-to-assemble design. This cart is suitable for various material handling tasks, including transporting loads in warehouses, factories, and other industrial settings. Its compact size and maneuverability make it ideal for navigating narrow aisles and congested areas. The pneumatic tires provide a smooth ride, even on uneven surfaces.

Rev. 1/31/2014 LSC-2448-PT, manual.doc
Copyright 2014 Vestil Manufacturing Corp. Page 1 of 7
LSC2448PTLANDSCAPECART
A
SSEMBLYINSTRUCTIONS
Receivinginstructions:
Afterdelivery,immediatelyremovethepackagingfromtheproductinamannerthatpreservesthepackagingand
maintainstheorientationoftheproductinthepackaging;theninspecttheproductcloselytodeterminewhetherit
sustaineddamageduringtransport.Ifdamageisdiscoveredduringtheinspection,immediatelyrecordacomplete
descriptionofthedamageonthebilloflading.Iftheproductisundamaged,discardthepackaging.
NOTES:
1)Compliancewithlaws,regulations,codes,andnonvoluntarystandardsenforcedinthelocationwheretheproduct
isusedisexclusivelytheresponsibilityoftheowner/enduser.
2)Vestilisnotliableforanyinjuryorpropertydamagethatoccursasaconsequenceoffailingtoapplyeither:
a)Instructionsinthismanual;or
b)Informationprovidedonlabelsaffixedtotheproduct.NeitherisVestilresponsibleforanyconsequential
damagessustainedasaresultoffailingto
exercisesoundjudgmentwhileassembling,i nstalling,usingormaintaining
thisproduct.
VESTILMANUFACTURINGCORP.
2999NorthWayneStreet,P.O.Box507,Angola,IN46703
Telephone:(260)6657586‐or‐TollFree(800)3480868
Fax:(260)6651339
www.vestilmfg.comemail:sales@vestil.com
Table of Contents
Hazard identification: explanation of signal words…………………………………………………………………… 2
Product Specifications by Model…………………... …………………………………………………………………. 2
Safety Guidelines………………………………………………………………………………………………………... 2
Components………………………………………….………………………………………………………………….. 3
Assembly instructions………………………………………………………………………………………………….. 4 - 6
Limited warranty…………………………………………………………………………………………………………. 7
Rev. 1/31/2014 LSC-2448-PT, manual.doc
Copyright 2014 Vestil Manufacturing Corp. Page 2 of 7
HazardIdentification‐‐ExplanationofSIGNALWORDS
ThismanualusesSIGNALWORDStoindicate thelikelihoodofpersonalinjuries,aswellastheprobable
seriousnessofthoseinjuries,iftheproductismisusedinthewaysdescribed.Othersignalwordscallattentionto
usesoftheproductlikelycausepropertydamage.Thesignalwordsusedappearbelowalong
withthemeaningof
eachword:
Identifiesahazardoussituationwhich,ifnotavoided,WILLresultinDEATHorSERIOUS
INJURY.Useofthissignalwordislimitedtothemostextremesituations.
Identifiesahazardoussituationwhich,ifnotavoided,COULDresultinDEATHorSERIOUS
INJURY.
Indicatesahazardoussituationwhich,ifnotavoided,COULDresultinMINORorMODERATE
injury.
Identifiespracticeslikelytoresultinproduct/propertydamage,suchasoperationthatmight
damagetheproduct.
Eachpersonwhoassembles,installs,uses,ormaintainsthisproductshouldreadtheentiremanualinadvance
andfullyunderstandthedirections.Ifafterreadingthemanualyoudonotunders tandaninstruction,askyour
supervisororemployerforclarification,becausefailuretoadheretothedirectionsinthismanualmight
resultin
seriouspersonalinjury.
ProductSpecifications:
Model Description
Deck
Dimensions
Heightof
Sides
Deck
Elevation
UniformStatic
Capacity
Wheel
dimensions
Net
Weight
LSC24484SD
Folddown
sides
24in.x48in.
(61cmx122cm)
12in.
(30½in.)
28¼in.
(72in.)
1,000pounds
(454.5kg)
13in.x4¾in.
(33cmx12cm)
95 lb.
43.2kg
LSC2448TC
Lowprofile
tiltingcart
24in.x48in.
(61cmx122cm)
1in.
(2.5cm)
3in.
(7.6cm)
500pounds
(227.3cm)
16in.x4in.
(40.6cmx10cm)
58 lb.
(26.4kg)
LSC2448PT
Platform
cart
24in.x48in.
(61cmx122cm)
½in.
(1.3cm)
12¾in.
(32.4cm)
500pounds
(227.3cm)
10in.3½in.
(25cmx9cm)
55 lb.
(25kg)
LSC2448SC
Double
deckercart
24in.x48in.
(61cmx122cm)
1¾in.
(4.4cm)
33in.
(84cm)
300pounds
(136.4cm)
10x3½in.
(25cmx9cm)
98 lb.
(44.5kg)
LSC3052PCW
Composite
cratecart
30in.x46¼in.
(76cmx117½cm)
14in.
(35½cm)
42in.
(107cm)
1,000pounds
(454.5kg)
13in.5in.
(33cmx13cm)
64 lb.
(29.1kg)
SafetyGuidelines:
Vestildiligentlystrivestoidentifyforeseeablehazardsassociatedwiththeuseofitsproducts.However,material
handlingisinherently dan gerous andnomanualcanaddresseveryconceivablerisk.Theenduserultimatelyis
responsibleforexercisingsoundjudgmentatalltimes.
Failuretoreadandunderstandtheentiremanualbeforeassembling,usingandservicingthecart
is a misuse of the product. If this product is used improperly or carelessly, the user and/or bystanders might
sustainseriouspersonalinjuries.Toreducethelikelihoodofinjury:
DO NOT modify the product in any way UNLESS you first obtain written approval from Vestil. Unauthorized
modificationsautomaticallyvoidtheLimitedWarrantyandmightmaketheproductunsafetouse.
DO NOT attempt to carry or transport loads that exceed the capacity of the cart. Secure loads to the deck.
Alwayscenterandevenlydistribute allloadsplacedonthecart.
DONOTstand,sitorrideonthecart.
DONOTusethecartifyouhearunusualsoundswhileraisingorloweringthedeck.
Alwayswatchtheloadcarefullywhilethecartismoving.
Alwayscontrolthecartfromtheuphillsidewhilemovingupordownslopes.
Properuse,maintenance,andstorageareessentialforthisproducttofunctionproperly.
o Regularlycheckallfasteners.Tightenloosenutsandlubricatepivotpointsasnecessary.
o Checktireinflation.Airpressureshouldequalthere commendedinflationpressurethatappearsonthesidewalls
ofthetires.
Rev. 1/31/2014 LSC-2448-PT, manual.doc
Copyright 2014 Vestil Manufacturing Corp. Page 3 of 7
Components:
G:Deck
H:Handle
Hardware:
A:Molded
plastic
handle
coupler
D:M8x15mmhexboltsand
correspondingflatwashersand
hexnuts
E:Axlelocknuts
C:axleflat
washers
B:Handle
bolt,flat
washer,and
hexnut
Wheelassemblylinkages:
Rearend
Frontend
N:Steering
assembly
P:Rearaxle
weldment
I:Right
rearlink
arm
J:Leftrear
linkarm
K:Steeringassembly
stabilizerlink
L:Wheel
linkage
F:Pneumatictires
M:Steeringyoke
Item Quantity Item Quantity
A 1 I 1
B 1 J 1
C 4 K 1
D 13 L 1
E 4 M 1
F 4 N 1
G 1 P 1
H 1
Rev. 1/31/2014 LSC-2448-PT, manual.doc
Copyright 2014 Vestil Manufacturing Corp. Page 4 of 7
Assemblyinstructions:
1. Assemblethesteeringmechanism:
a) Attachthewheellinkage(L)tothesteeringassembly(N)with2bolts(D)showninFIG.1(loca tionof
boltsmarkedwith“a”);then
b) Slidetheboltholeintheupperarmoftheyoke(M)ontothepegoftheassembly(N)
andthenslidea
cotterpinthroughthepinholeinthepeg.TheseconnectionsarecircledinFIG.1below;
c) Fastenthebottomlegoftheyoketothesteeringassembly(N)withahexboltsasshowninFIG.1.
Boltlocationismarkedwith“c”;and
then
d) Connectthesteeringassemblystabilizerlink(K)totheyoke(M)andthesteeringassembly(N)witha
bolt.Thelocationoftheboltismarked“d”.
2. Slidetheaxlereceiversoftwowheels(seeFIG.2B)ontothewheelpostsofthesteeringassembly(N);then
securethewheelsinplacewithaxlelocknuts(E).
3. Puttogethertherearwheel
assembly:
a) Slidetherightandleftrearlinkarms
ontotheendsof
therearaxle
weldment(P)asshowninFig.2;then
b) Slidetheaxlereceiverofawheelonto
eachendoftheaxle.Besuretoorient
thewheelssuchthatthev alvestems
areontheoutersidesofthewheels
(seeFIG.2B).
FIG.1:Steeringmechanism
a
a
c
d
Stabilizerlink(K)
Steering
assembly(N)
Wheellinkage(L)
Yoke(M)
FIG.2A:Rearwheelassembly
Rearaxleweldment(P)
Leftrearlinkarm(J)
Right rearlinkarm(I)
Pneumatictire(F)
FIG.2B:Wheels

OuterfaceInnerface
Axle
receiver
Wheel
post
Valve
stem
Rev. 1/31/2014 LSC-2448-PT, manual.doc
Copyright 2014 Vestil Manufacturing Corp. Page 5 of 7
4. Fastenthesteeringmechanismandtherearwheelassemblytotheundersideofthedeck(G).
a) Aligntheboltholesintherearaxleweldment(P)withtheboltholesintheformedstrap(labeled“a”in
FIG.3below);thenfastentheweldmenttostrapawith2
bolts,flatwashersandhexnuts(identifiedwith
greyarrowsinFIG.3).
b) Aligntheboltholesintherightandleftrearlinkarmswiththeboltholesintheformedstraplabeled“b”.
Fastenthelinkarmstostrapbwith4bolts,flatwashersandhex
nuts(.
c) Next,aligntheboltholesinthesteeringassembly(N)withtheboltholesinstrap“c”(indicatedby white
arrowsbelow)andtheboltholesinthestabilizerlink(K)withtheholesinstrap“d”(seeFIG.3C).Use
FIG.3:Attachsteeringassemblyandrearwheelassemblytodeck
a
b
c
d
FIG.3C:Fastenstabilizerarmtodeck
Bolt
Hexnut
Flat
washer
Fastenleftandri
g
htlinkarmstodeck
FIG.3B:Linkarmconnection
tostrapb
Flat
washer
Hex
nut
Bolt
Rearwheel
assembly
Steering
assembly
Leftlinkarm
Handle
bracketof
yoke
Rev. 1/31/2014 LSC-2448-PT, manual.doc
Copyright 2014 Vestil Manufacturing Corp. Page 6 of 7
5. Attachthehandletothesteeringassembly(refertoFIG.4below).
a) Slidetheendofthehandleintothehandlecoupler(A)andaligntheboltholesinthehandlewiththe
boltholesinthecoupler;then
b) Slidethehandleboltthroughonesideofthe
handlebracketoftheyoke(alsoidentifiedinFIG.3on
p.5),throughthecouplerandhandle,andthroughtheothersideofthebracket;
c) Securethehandleboltwithaflatwasherandhexnut.
FIG.4:Attachhandletosteeringassembly

Handle
coupler (A)
Handle
bracket
Hex
nut
Flat
washer
Handle
bolt
Handle
Rev. 1/31/2014 LSC-2448-PT, manual.doc
Copyright 2014 Vestil Manufacturing Corp. Page 7 of 7
LIMITED WARRANTY
Vestil Manufacturing Corporation (“Vestil”) warrants this product to be free of defects in material and workmanship
during the warranty period. Our warranty obligation is to provide a replacement for a defective original part if the part is
covered by the warranty, after we receive a proper request from the warrantee (you) for warranty service.
Who may request service?
Only a warrantee may request service. You are a warrantee if you purchased the product from Vestil or from an
authorized distributor AND Vestil has been fully paid.
What is an “original part”?
An original part is a part used to make the product as shipped to the warrantee.
What is a “proper request”?
A request for warranty service is proper if Vestil receives: 1) a photocopy of the Customer Invoice that displays the
shipping date; AND 2) a written request for warranty service including your name and phone number. Send requests
by any of the following methods:
Mail Fax Email
Vestil Manufacturing Corporation (260) 665-1339 [email protected]
2999 North Wayne Street, PO Box 507 Phone
Angola, IN 46703 (260) 665-7586
In the written request, list the parts believed to be defective and include the address where replacements should be
delivered.
What is covered under the warranty?
After Vestil receives your request for warranty service, an authorized representative will contact you to determine
whether your claim is covered by the warranty. Before providing warranty service, Vestil may require you to send the
entire product, or just the defective part or parts, to its facility in Angola, IN. The warranty covers defects in the following
original dynamic components: motors, hydraulic pumps, electronic controllers, switches and cylinders. It also covers
defects in original parts that wear under normal usage conditions (“wearing parts”): bearings, hoses, wheels, seals,
brushes, batteries, and the battery charger.
How long is the warranty period?
The warranty period for original components is 30 days. The warranty period begins on the date when Vestil ships the
product to the warrantee. If the product was purchased from an authorized distributor, the period begins when the
distributor ships the product. Vestil may extend the warranty period for products shipped from authorized distributors
by up to 30 days to account for shipping time.
If a defective part is covered by the warranty, what will Vestil do to correct the problem?
Vestil will provide an appropriate replacement for any covered part. An authorized representative of Vestil will contact
you to discuss your claim.
What is not covered by the warranty?
1. Labor;
2. Freight;
3. Occurrence of any of the following, which automatically voids the warranty:
Product misuse;
Negligent operation or repair;
Corrosion or use in corrosive environments;
Inadequate or improper maintenance;
Damage sustained during shipping;
Collisions or other incidental contacts causing damage to the product;
Unauthorized modifications: DO NOT modify the product IN ANY WAY without first receiving written
authorization from Vestil. Modification(s) might make the product unsafe to use or might cause excessive and/or
abnormal wear.
Do any other warranties apply to the product?
Vestil Manufacturing Corp. makes no other express warranties. All implied warranties are disclaimed to the extent
allowed by law. Any implied warranty not disclaimed is limited in scope to the terms of this Limited Warranty.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

Vestil LSC-2448-PT User manual

Type
User manual

Vestil LSC-2448-PT is a platform cart with a deck measuring 24in. x 48in. (61cm x 122cm) and a uniform static capacity of 500 pounds (227.3kg). It features 10in. 3½in. (25cm x 9cm) pneumatic tires, a molded plastic handle coupler, and an easy-to-assemble design. This cart is suitable for various material handling tasks, including transporting loads in warehouses, factories, and other industrial settings. Its compact size and maneuverability make it ideal for navigating narrow aisles and congested areas. The pneumatic tires provide a smooth ride, even on uneven surfaces.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI