Automate 7115A Owner's manual

Brand: Automate

Model: 7115A

Type: Owner's manual

4115A

Compatible with the

following models:

REPLACEMENT TRANSMITTER

P/N 7115A

REPLACEMENT TRANSMITTER

1-Button Remote Control

The following Learn Routine is used to program this replacement

remote control to your system.

Prepare the vehicle system for pairing

1. Turn the key to the On position.

2. Within 5 seconds, press and release the Control Center/Valet

button the number of times that corresponds to the selected

channel listed below. After you select the channel, press the

Control Center/Valet button again and HOLD it. The LED on the

control center flashes the same number of times as the corre-

sponding selected channel.* Do NOT release the Control Center/

Valet button.

3. While holding the Control Center/Valet button, press the button

on the remote control.* Once the code is learned you can

release the Control Center/Valet button and remove the key.

* The horn honks as confirmation, if connected.

Note: Refer to owner’s guide for remote control operation.

Channel # Function

Auto learn standard conﬁguration

Delete all remotes

FCC/ID Notice

This device complies with Part 15 of FCC rules. Opera-

tion is subject to the following conditions: (1) This

device may not cause harmful interference, and (2) This

device must accept any interference received, including

interference that may cause undesired operation.

CAUTION! Changes or modiﬁcations not expressly

approved by the party responsible for compliance could

void the user’s authority to operate this device.

WWW.DIRECTED.COM

MADE IN TAIWAN

P/N 7115A

01/19

WARNING: This product can expose you to

chemicals including DEHP, which is known to

the State of Califotrnia to cause cancer and birth

defects or other reproductive harm. For more

information, go to www.P65Warnings.ca.gov

560-10150 (R1.0)

Automate 7115A Owner's manual

Automate 7115A Owner's manual

Automate 7115A Owner's manual

Related papers

Other documents