Sony Série PlayStation SCPH-141 User manual

Instruction Manual

Thank you for purchasing the PlayStation®

(PS one

™

) video game console.

You can play CD-ROM discs which have both

the PlayStation® logo and

designation, as well as audio CDs with this

unit.

Before operating the unit, please read this

manual and retain it for future reference.

Mode d’emploi

Nous vous remercions d’avoir fait l’acquisition

de la console de jeux vidéo PlayStation®

(PS one

™

).

Vous pouvez utiliser avec cet appareil des

disques CD-ROM portant le logo PlayStation®,

la désignation ainsi que des CD

audio.

Avant de faire fonctionner cet appareil, lisez

attentivement le présent mode d’emploi et

conservez-le pour toute référence ultérieure.

Manual de Instrucciones

Gracías por su compra del juego PlayStation®

(PS one

™

).

Con este aparato podrá jugar con discos CD-

ROM que tengan el logotipo PlayStation® y la

designación así como reproducir

discos compactos de audio.

Antes de poner a funcionar este aparato, por

favor lea este manual y consérvelo para

consultarlo en el futuro.

Connector section

?/1 RESET button and

?/1 indicator

Disc cover

A button

MEMORY CARD slots

Controller ports

L2 button, R2 button,

L1 button, R1 button

Directional buttons

f , a , ✕ , s buttons

START button

ANALOG mode button

SELECT button

Left analog stick,

right analog stick,

L3 button, R3 button

SCPH-101 / 94015

Section des connecteurs

Bouton ?/1/RESET et

voyant ?/1

Couvercle du

compartiment à disque

Bouton A

Fentes pour MEMORY CARD

(carte mémoire)

Ports de Manette

Touche L2, touche R2,

touche L1, touche R1

Touches directionnelles

Touches f , a , ✕ , s

Touche START

Touche de mode ANALOG

(analogique)

Touche SELECT

Manche analogique gauche,

manche analogique droit,

touche L3, touche R3

Sección de conectores

Botón ?/1/RESET e

indicador ?/1

Cubierta del disco

Botón A

Ranuras de MEMORY CARD

(tarjeta de memoria)

Puertos del Control

Botón L2, botón R2,

botón L1, botón R1

Botones de dirección

Botones f , a , ✕ , s

Botón START

Botón modo ANALOG

(analógico)

Botón SELECT

Palanca analógica izquierda,

palanca analógica derecha,

botón L3 ,botón R3

US English ES EspañolFR Français

3-072-447-11(1)

2 US WARNING

To prevent fire or shock hazard, do

not expose the unit to rain or

moisture.

To avoid electrical shock, do not

disassemble.

Refer servicing to qualified

personnel only.

Caution

This AC adaptor is not intended to

be serviced. Should the product

cease to function in its intended

manner, it should be returned to

the manufacturer or be discarded.

Caution

The use of optical instruments with

this product will increase eye

hazard.

Caution

TO PREVENT ELECTRIC SHOCK,

MATCH WIDE BLADE OF PLUG TO

WIDE SLOT, FULLY INSERT.

This graphical symbol with

supplemental marking is located on

the bottom of the PlayStation®

(PS one

™

) console.

This symbol is intended to alert the

user to the presence of uninsulated

“dangerous voltage” within the

product’s enclosure that may be of

sufficient magnitude to constitute a

risk of electric shock to persons.

This symbol is intended to alert the

user to the presence of important

operating and maintenance

(servicing) instructions in the

literature accompanying the

appliance.

Information

For Customers in the USA

This equipment has been tested and

found to comply with the limits for a

Class B digital device, pursuant to

Part 15 of the FCC rules. These limits

are designed to provide reasonable

protection against harmful

interference in a residential

installation.

This equipment generates, uses, and

can radiate radio frequency energy

and, if not installed and used in

accordance with the instructions, may

cause harmful interference to radio

communications.

However, there is no guarantee that

interference will not occur in a

particular installation. If this

equipment does cause harmful

interference to radio or television

reception, which can be determined

by turning the equipment off and on,

the user is encouraged to try to

correct the interference by one or

more of the following measures:

– Reorient or relocate the receiving

antenna.

– Increase the separation between the

equipment and receiver.

– Connect the equipment into an

outlet on a circuit different from

that to which the receiver is

connected.

– Consult the dealer or an

experienced radio/TV technician

for help.

You are cautioned that any changes

or modifications not expressly

approved in this manual could void

your authority to operate this

equipment.

Read before operating your

PlayStation

® (PS one

™

)

A few people may experience

epileptic seizures when viewing

flashing lights or patterns in our daily

environment. These persons may

experience seizures while watching

TV pictures or playing video games,

including games played on the

PlayStation® (PS one

™

) console.

Players who have not had any

seizures may nonetheless have an

undetected epileptic condition.

Consult your physician before

playing video games if you have an

epileptic condition or experience any

of the following symptoms while

playing video games: altered vision,

muscle twitching, other involuntary

movements, loss of awareness of your

surroundings, mental confusion,

and/or convulsions.

Use the supplied AC adaptor only. If

you use other types, it may cause fire,

electrical shocks or a malfunction.

Owner’s Record

The model and serial numbers are

located on the bottom of the

PlayStation® (PS one

™

). Record the

appropriate number in the space

provided below. Refer to them

whenever you call for technical

assistance at 1-800-345-7669.

Model No. SCPH-101

Serial No. _________________

Page is loading ...

5Table of Contents / Table des matières / Índice

ESFRUS

2 WARNING

6 Important Safeguards

10 Unpacking / Déballage /

Desempaque

11 Precautions

14 Connecting your PlayStation®

(PS one

™

) to a TV set

18 Playing a game

22 Analog Controller

(DUALSHOCK

®) usage

26 Using the Memory Card

30 Playing an audio CD

36 Enjoying SoundScope

42 Troubleshooting

48 LIMITED WARRANTY

51 Specifications

3 AVERTISSEMENT

10 Unpacking / Déballage /

Desempaque

12 Précautions

15 Raccordement de la console

PlayStation

® (PS one

™

)

à un téléviseur

19 Comment jouer à un jeu vidéo

23 Utilisation de la Manette

Analogique (DUALSHOCK

®)

27 Utilisation de la Memory Card

(carte mémoire)

31 Lecture d’un CD audio

37 Découvrez le SoundScope

42 Dépannage

49 GARANTIE LIMITÉE

51 Fiche technique

4 ADVERTENCIA

10 Unpacking / Déballage /

Desempaque

13 Precauciones

15 Conexión de su PlayStation®

(PS one

™

) a un televisor

19 Para jugar

23 Empleo del Control Analógico

(DUALSHOCK

®)

27 Uso de Memory Card (tarjeta

de memoria)

31 Reproducción de CD de

audio

37 Uso de SoundScope

43 Solución de problemas

50 GARANTÍA LIMITADA

52 Especificaciones

6 Important Safeguards

For your protection, please read these safety instructions completely

before operating the appliance, and keep this manual for future

reference.

Carefully observe all warnings, precautions and instructions on the

appliance, or those described in the Instruction Manual and adhere to

them.

USE

Power Sources

This set should be operated only from the type of

power source indicated on the marking label. If you

are not sure of the type of electrical power supplied to

your home, consult your dealer or local power

company. For those sets designed to operate from

battery power, or other sources, refer to the operating

instructions.

Grounding or Polarization

The set is equipped with a polarized AC power cord

plug (a plug having one blade wider than the other).

This plug will fit into the power outlet only one way.

This is a safety feature. If you are unable to insert the

plug fully into the outlet, try reversing the plug. If the

plug should still fail to fit, contact your electrician to

have a suitable outlet installed. Do not defeat the

safety purpose of the polarized plug by forcing it in.

Overloading

Do not overload wall outlets, extension cords or

convenience receptacles beyond their capacity, since

this can result in fire or electric shock.

Object and Liquid Entry

Never push objects of any kind into the set through

openings as they may touch dangerous voltage points

or short out parts that could result in a fire or electric

shock. Never spill liquid of any kind on the set.

Attachments

Do not use attachments not recommended by the

manufacturer, as they may cause hazards.

Cleaning

Unplug the set from the wall outlet before cleaning or

polishing it. Do not use liquid cleaners or aerosol

cleaners. Use a cloth lightly dampened with water for

cleaning the exterior of the set.

7

INSTALLATION

Water and Moisture

Do not use powerline operated sets near water

– for example, near a bathtub, washbowl, kitchen

sink, or laundry tub, in a wet basement, or near a

swimming pool, etc.

Power-Cord Protection

Route the power cord so that it is not likely to be

walked on or pinched by items placed upon or against

it, paying particular attention to the plugs, receptacles,

and the point where the cord exits from the appliance.

Ventilation

The slots and openings in the cabinet are provided for

necessary ventilation. To ensure reliable operation of

the set, and to protect it from overheating, these slots

and openings must never be blocked or covered.

– Never cover the slots and openings with a cloth or

other materials.

– Never block the slots and openings by placing the

set on a bed, sofa, rug or other similar surface.

Accessories

Do not place the set on an unstable cart, stand, tripod,

bracket, or table. The set may fall, causing serious

injury to a child or an adult, and serious damage to

the set. Use only a cart, stand, tripod, bracket, or table

recommended by the

manufacturer.

An appliance and cart combination should be moved

with care. Quick stops, excessive force, and uneven

surfaces may cause the appliance and cart

combination to overturn.

– Never place the set in a confined space, such as a

bookcase, or built-in cabinet, unless proper

ventilation is provided.

– Do not place the set near or over a radiator or heat

register, or where it is exposed to direct sunlight.

(Continued)

8

ANTENNAS

Outdoor Antenna Grounding – If an outdoor antenna or cable system is

installed, follow the precautions below.

An outdoor antenna system should not be located in the vicinity of overhead

power lines or other electric light or power circuits, or where it can come in

contact with such power lines or circuits.

WHEN INSTALLING AN OUTDOOR ANTENNA SYSTEM, EXTREME CARE

SHOULD BE TAKEN TO KEEP FROM CONTACTING SUCH POWER LINES

OR CIRCUITS AS CONTACT WITH THEM IS ALMOST INVARIABLY FATAL.

Be sure the antenna system is grounded so as to provide some protection

against voltage surges and built-up static charges. Section 810 of the National

Electrical Code provides information with respect to proper grounding of the

mast and supporting structure, grounding of the lead-in wire to an antenna

discharge unit, size of grounding conductors, location of antenna-discharge

unit, connection to grounding electrodes, and requirements for the grounding

electrode.

Lightning

For added protection for this set during a lightning

storm, or when it is left unattended and unused for

long periods of time, unplug it from the wall outlet

and disconnect the antenna or cable system. This will

prevent damage to the set due to lightning and power-

line surges.

SERVICE

Damage Requiring Service

Unplug the set from the wall outlet and refer servicing

to qualified service personnel under the following

conditions:

– When the power cord or plug is damaged or frayed.

– If liquid has been spilled or objects have fallen into

the set.

– If the set has been exposed to rain or water.

Important Safeguards (Continued)

Ground Clamp

Antenna Lead in Wire

Antenna Discharge unit

(NEC Section 810-20)

Electric

Service

equipment

Ground Clamps

Grounding Conductors

(NEC Section 810-21)

Power Service Grounding

Electrode System

(NEC Art 250, Part H)

FRAYED OR TAUT A.C. LINE

CRACKED PLUG

9

– If the set has been subject to excessive shock by

being dropped, or the cabinet has been damaged.

– If the set does not operate normally when following

the Instruction Manual. Adjust only those controls

that are specified in the Instruction Manual.

Improper adjustment of other controls may result in

damage and will often require extensive work by a

qualified technician to restore the set to normal

operation.

– When the set exhibits a distinct change in

performance – this indicates a need for service.

Servicing

Do not attempt to service the set yourself as opening

or removing covers may expose you to dangerous

voltage or other hazards.

Refer all servicing to qualified service personnel.

Replacement parts

When replacement parts are required, be sure the

service technician has used replacement parts

specified by the manufacturer that have the same

characteristics as the original parts.

Unauthorized substitutions may result in fire, electric

shock, or other hazards.

Safety Check

Upon completion of any service or repairs to the set,

ask the service technician to perform routine safety

checks (as specified by the manufacturer) to determine

that the set is in safe operating

condition.

Page is loading ...

11US

On safety

•As the laser beam emitted from the

lens of this unit may be harmful to

the eyes, do not attempt to

disassemble the casing. Refer for

technical assistance. Call 1-800-345-

7669.

•Should any solid objects or liquid

fall into the unit, unplug it and call

1-800-345-7669.

•Unplug the unit from the wall

outlet if you do not intend to use it

for any length of time. When

disconnecting the power cord from

a wall outlet, pull it out by grasping

the plug. Never pull the cord itself.

For your health

To prevent eye strain:

•Be sure to take a break of about 15

minutes during every hour of play.

•Do not play a game when you are

very tired or short of sleep.

•Play in a well-lit room and keep a

safe distance from the TV screen.

On operation

•Operate the unit only on 120V AC,

60 Hz.

•Do not block the air vents or wrap

up the unit since heat may build up

internally.

•Do not handle the unit roughly,

subject it to any mechanical shock,

or place any heavy objects on top of

it. Doing so may damage the unit

and the disc.

Precautions

•Do not leave your PlayStation®

(PS one

™

) near heat sources, or in a

place subject to direct sunlight

(operating temperature: 41˚F-

95˚F(5˚C-35˚C)), excessive dust or

sand, moisture, rain, on an uneven

surface, or in a car with its windows

closed.

•If the unit causes interference to

radio or television reception, turn

off the unit or move it away from

the radio or television.

•Do not touch the lens inside the disc

cover. To protect the lens from dust,

keep the disc cover closed except

when inserting and removing discs.

If the lens is not clean, the unit may

not operate properly.

•Even if the unit is turned off, do not

disconnect the AC adaptor from the

unit while the other end of the cord

is connected to the wall outlet.

•Sony Computer Entertainment Inc.

does not warrant damages caused

by the use of products unlicensed

by Sony Computer Entertainment

Inc.

•This unit does not support SCPH-

1040U Link Cable.

•It is different from PlayStation® how

to reset the unit. For more

information, see “To restart the

game” on page 20.

•Do not touch the AC adaptor or the

console for a long time. This may

cause low temperature burn.

About the discs

•You can use two kinds of discs with

this unit:

CD-ROM discs with both the

PlayStation® logo and

designation, and audio CD discs.

•Some discs sold in foreign countries

cannot be used with this unit.

On handling discs

•Do not leave the discs near heat

sources or expose them to direct

sunlight or excessive moisture.

•Store the discs in their cases when

not using them.

•Do not touch the surface when

handling the discs.

•Do not stick paper or tape on the

discs.

•Do not write on the discs with a

marker.

On moisture condensation

If the unit is taken directly from a

cold to a warm location, or is placed

in a very damp room, moisture may

condense on the lens inside the unit.

Should this occur, the unit may not

operate properly. If this happens,

remove the disc for several hours

until the moisture evaporates. If the

unit still does not operate properly,

please call 1-800-345-7669 for

technical assistance.

Do not connect your

PlayStation

® (PS one

™

) to a

projection TV

Unless your projection TV is an LCD

type, do not connect your

PlayStation® (PS one

™

) to it without

first referring to the user manual for

the TV. Failure to do so may cause

permanent damage to the TV screen.

Never analyze or modify your

PlayStation

® (PS one

™

)

To use your PlayStation® (PS one

™

)

always follow the instructions

provided in this manual. Sony

Computer Entertainment Inc.

expressly prohibits the analysis or

modification of the PlayStation®

(PS one

™

), and also prohibits the

analysis or use of its circuit

configurations without the express

written permission of Sony Computer

Entertainment Inc., to the extent

allowable by law.

Older model TVs

The PlayStation® (PS one

™

) game

console may not be compatible with

some older model televisions and/or

monitors. There is nothing wrong

with your PlayStation® (PS one

™

) or

the way in which it was

manufactured. The problem

technically lies within the TV model.

Contact Customer Services at 1-800-

345-7669 for clarification and

assistance.

Page is loading ...

14 US

IMPORTANT INFORMATION

A few TVs or monitors may experience a

bouncing effect in their pictures when

using the PlayStation

® (PS one

™

) game

console. There is nothing wrong with

the PlayStation

® (PS one

™

) or the way it

is manufactured. The problem

technically lies within the television. If

you encounter such a problem with

your television/monitor, please contact

Consumer Services Technical Support at

1-800-345-7669.

A 1 Connecting to a TV

with audio/video input

Connect your PlayStation®

(PS one

™

) to the TV using the

supplied AV cable (integrated

audio/video) matching the plug

colors.

If your TV is monaural, do not

connect the red plugs.

If you want to hear both left and

right sounds from a monaural TV,

use a commercially available 3-

phono to 2-phono (stereo to

monaural) type audio/video cable.

If your TV has an S VIDEO INPUT

connector, you can connect it by

using the SCPH-1100U S Video

cable (sold separately).

Connecting your PlayStation®

(PS one

™

) to a TV set

After connecting

Set your TV to the appropriate

video input mode. (Refer to the

instruction manual for your TV.)

2 Connecting to a VCR

Connect your PlayStation®

(PS one

™

) to the VCR using the

supplied A V cable (integrated

audio/video) matching the plug

colors.

If your VCR is monaural, do not

connect the red plugs.

After connecting

Set your TV and VCR operation

appropriately. (Refer to the

instruction manuals for your TV and

VCR.)

(Continued)

A

1

2

Page is loading ...

16 US

B

B Connecting to a TV with

an antenna input

Connect your PlayStation®

(PS one

™

) to the antenna input on

the TV using the optional SCPH-

10071 RFU adaptor (sold

separately). In this case, the sound

will be monaural.

After connecting

Set the channel switch on the RFU

adaptor and the channel selector of

your TV to VHF channel CH 3 or

CH 4, whichever is not active in

your area.

Connecting your PlayStation

®

(PS one

™

)

to a TV set (Continued)

CH3

CH4

ANT

Page is loading ...

18 US

1 Press the A (open)

button.The disc cover opens.

2 Insert a disc in the disc

holder with the label side

up.

3 Close the disc cover.

When you close the disc

cover, close it firmly until it

clicks.

4 Press the ?/1/RESET button.

The ?/1 indicator lights up.

After the start-up screen,

screen 1 appears and the

game starts.

Set the supplied analog controller

(DUALSHOCK®) to the

appropriate mode for the software

(see page 22).

• When you close the disc cover, push here firmly until it

clicks.

• Lorsque vous refermez le compartiment à disque, appuyez

fermement ici jusqu'à ce que vous entendiez un clic.

• Cuando cierre la cubierta del disco, presione aquí

firmemente hasta que oiga un “clic”.

Playing a game

Tips

• You can also start the game by

inserting a PlayStation

® format CD-

ROM disc after screen 2 appears.

• If screen 3 appears, the disc that was

inserted may not be a PlayStation

®

format disc. Check to ensure that it

has both the PlayStation® logo and

designation on it.

• You can also play a game using the

optional Mouse (SCPH-1090U).

bWARNING

Before removing a disc, press the A

button and make sure that the disc

completely stops.

Never touch the disc while it is moving.

Otherwise, you may injure yourself and

may cause damage to the disc and/or

the PlayStation

® (PS one

™

).

(Continued)

123

Page is loading ...

20 US

A To restart the game

Press the ?/1/RESET button twice.

Be careful not to press the

?/1/RESET button while playing

the game, or the game will end.

B To remove the disc

Press the A button.

While pressing the pivot gently,

pick up the disc holding the edges.

When you close the disc cover,

close it firmly until it clicks.

C Screens that appear

after the start-up screen

When you turn on your

PlayStation® (PS one

™

), one of the

following screens will appear:

1 A CD-ROM with both the

PlayStation® logo and

designation is

inserted.

2 No disc is inserted.

3 A disc that cannot be played

with the PlayStation®

(PS one

™

) is inserted.

AB

?/1/RESET button

Bouton ?/1/RESET

Botón ?/1/RESET

A button

Bouton A

Botón A

Playing a game (Continued)

• When you close the disc cover, push here firmly until it

clicks.

• Lorsque vous refermez le compartiment à disque, appuyez

fermement ici jusqu'à ce que vous entendiez un clic.

• Cuando cierre la cubierta del disco, presione aquí

firmemente hasta que oiga un “clic”.

123

Page is loading ...

22 US

A Mode switching and the

mode indicator

This analog controller

(DUALSHOCK®) can be switched

between two modes by pressing

the ANALOG mode button.

Each time the ANALOG mode

button is pressed, the mode

changes as follows:

Digital mode (indicator: off)

M m

Analog mode (indicator: red)

Note

After verifying that the “

” icons are present on the

software package, switch to the

appropriate mode for use.

Note however, that some software

makes this adjustment automatically. In

such cases, the ANALOG mode button

is overridden by the software. For

details, refer to the software manual.

ANALOG mode button

Touche de mode ANALOG (analogique)

Botón modo ANALOG (analógico)

Mode indicator

Voyant de mode

Indicador de modo

SELECT button

Touche SELECT

Botón SELECT

L2 button

Touche L2

Botón L2

L1 button

Touche L1

Botón L1

Directional button

Touche directionnelle

Botón de dirección

ANALOG mode button

Touche de mode ANALOG

(analogique)

Botón modo ANALOG

(analógico)

Indicator: off

Voyant: éteint

Indicador: apagado

f button

Touche f

Botón f

s button

Touche s

Botón s

✕ button

Touche ✕

Botón ✕

a button

Touche a

Botón a

R1 button

Touche R1

Botón R1

R2 button

Touche R2

Botón R2

Analog Controller

(DUALSHOCK

®) usage

B Digital mode

(indicator: off)

You can operate this controller in

the same manner as the SCPH-

1080U Controller.

(Continued)

A

B

START button

Touche START

Botón START

Page is loading ...

24 US

C Analog mode

(indicator: red)

Supports software with the

“ ” icon.

Before using the controller, rotate

the sticks once with your thumbs

as if drawing a circle, as shown in

the diagram at left. Do not twist

the sticks (D).

Vibration function

This analog controller

(DUALSHOCK®) features a

vibration function. The vibration

function can be set to ON or OFF

on the monitor with the software.

The function of each button may

vary depending on the software

used. Refer to individual software

manuals for further details.

Notes

• When the analog controller

(DUALSHOCK

®) is not being used,

turn the PlayStation® (PS one

™

) off or

unplug the controller from the

PlayStation

® (PS one

™

).

• Before using the vibration function of

this controller, please read the

following notes on safety.

• The vibration function is designed for

power saving different from

PlayStation

® (SCPH-1001, SCPH-

5001, SCPH-5501, SCPH-7001, SCPH-

7501, SCPH-9001).

SELECT button

Touche SELECT

Botón SELECT

L2 button

Touche L2

Botón L2

L1 button

Touche L1

Botón L1

Directional button

Touche directionnelle

Botón de dirección

Left analog stick / L3 button *

Manche analogique gauche / Touche L3 *

Palanca analógica izquierda / Botón L3 *

ANALOG mode button

Touche de mode ANALOG (analogique)

Botón modo ANALOG (analógico)

Indicator: red

Voyant: rouge

Indicador: rojo

Right analog stick /

R3 button *

Manche analogique droit /

Touche R3 *

Palanca analógica derecha

/ Botón R3 *

R1 button

Touche R1

Botón R1

R2 button

Touche R2

Botón R2

START button

Touche START

Botón START

* The R3 button and the L3 button function when the stick is pressed.

* La touche R3 et la touche L3 fonctionnent lorsque la manette est enfoncée.

* Los botones R3 y L3 funcionan al oprimir la palabra de control.

Analog Controller (DUALSHOCK®) usage

(Continued)

For safety

• Stop using this unit immediately if

you begin to feel tired or if you

experience an unpleasant sensation

or pain in your hands and/or arms

while operating the controller. If

the condition persists, consult a

doctor.

• Do not attempt to operate the

controller in any way except with

your hands. Do not bring the

controller into close contact with

your head, face or near the bones of

any other part of your body.

• Do not use the vibration function

of the analog controller

(DUALSHOCK

®) if you have any

ailment in the bones or joints of

your hands or arms.

• Do not use the vibration function

of the analog controller

(DUALSHOCK

®) when your

fingers, hands, wrists, or arms are

broken, dislocated, or sprained; or

if you have a pulled muscle. These

ailments may become worse due to

the vibration of the controller.

• Avoid prolonged use of the analog

controller (DUALSHOCK

®). Take a

break at about 30 minute intervals.

C

f button

Touche f

Botón f

s button

Touche s

Botón s

✕ button

Touche ✕

Botón ✕

a button

Touche a

Botón a

D

Page is loading ...

26 US

You can save and load game data

using the optional SCPH-1020U

memory card (sold separately). You

can also copy data from one

memory card to another or delete

unnecessary data.

Each memory card has 15 memory

blocks, and you cannot save game

data which requires more blocks

than there are empty blocks on

your memory card.

Before you begin playing, check

how many memory blocks the

game requires.

Refer to the software manual of the

individual game for the required number of

memory blocks.

Set the supplied analog controller

(DUALSHOCK®) to digital mode

(indicator: off).

To start memory card operation

1 Turn on the power without

inserting a disc.

2 Insert the memory card.

3 Select “MEMORY CARD”

with the directional buttons

and press the a button.

MEMORY CARD 1

MEMORY CARD

(Carte mémoire) 1

MEMORY CARD

(Tarjeta de memoria) 1

MEMORY CARD 2

MEMORY CARD

(Carte mémoire) 2

MEMORY CARD

(Tarjeta de memoria) 2

Using the Memory Card

To cancel the memory card

operation

Select “EXIT “ (9) on the screen

with the directional buttons and

press the a button.

A Memory card screen

1 Contents of card 1. The game

data is displayed as icons.

2 Copy the game data onto the

card.

3 Copy entire game data

onto the card.

4 Delete unnecessary game

data.

5 Move with the directional

buttons to select icons.

6 Name of the game data.

7 “YES”

8 “NO”

9 Exit from the memory card

operation.

0 Icons. The number of icons

shows the number of used

memory blocks.

qz Contents of card 2.

(Continued)

A

1

2

3

4

5

6

789

0

qz

Page is loading ...

28 US

B Memory card operation

How to use the Controller for

the memory card screen

• To move the arrow: Press the

directional buttons.

• To select the items: Press the a

button.

• You can also operate the memory

card screen with the optional

SCPH-1090U Mouse.

To copy game data

1 Check that the card has

enough memory blocks, then

select “COPY”.

2 Select the card that has the

data to be copied.

3 Select the icon of the data to

be copied.

4 Press the a button.

To cancel copying, select

“NO”.

Notes

• You cannot copy the data to a card

that does not have enough empty

memory blocks. You may need to

delete unnecessary data.

• Do not remove the card until the

icons stop moving.

To copy all the game data

1 Check that the card has

enough memory blocks, then

select “COPY ALL”.

2 Select the card to be copied .

3 Press the a button.

To cancel copying, select

“NO”.

Notes

• Do not remove the card until the

icons stop moving.

• If the data you are trying to copy

already exists on the card, the data

will not be copied.

To delete the game data

1 Select “DELETE”.

2 Select the card that has the

data you want to delete.

3 Select the icon of the game

data you want to delete.

4 Select “YES”.

To cancel deleting, select

“NO”.

B

Directional buttons

Touches directionnelles

Botones de dirección

a button

Touche a

Botón a

Using the Memory Card (Continued)

Page is loading ...

30 US

You can also listen to audio CDs

with your PlayStation® (PS one

™

).

There are two ways to play CDs:

• Selecting the buttons on the

screen

• Pressing the buttons on the

controller (direct key operation)

Set the supplied analog controller

(DUALSHOCK®) to digital mode

(indicator: off).

Note

Both of the methods above function

simultaneously, so be sure not to

confuse them.

To start audio CD operation

1 Press the A button.

The disc cover opens.

2 Insert a disc in the disc holder

with the label side up.

3 Close the disc cover.

When you close the disc

cover, close it firmly until it

clicks.

Playing an audio CD

4 Press the ?/1/RESET button.

The ?/1 indicator lights up.

After the start-up screen, the

CD operation screen appears.

You can play an audio CD

after turning the power on.

To cancel the CD operation

Select “EXIT ” on the screen with

the directional buttons and press

the a button.

(Continued)

B

• When you close the disc cover, push here firmly until it

clicks.

• Lorsque vous refermez le compartiment à disque, appuyez

fermement ici jusqu'à ce que vous entendiez un clic.

• Cuando cierre la cubierta del disco, presione aquí

firmemente hasta que oiga un “clic”.

Page is loading ...

32 US

A CD operation screen

1 Displays the elapsed or

remaining playback time.

Press the “TIME” button to

switch the display.

2 Displays the selected

playback mode.

3 “CONTINUE”: Play all tracks

on the disc in order.

“SHUFFLE”: Play the tracks

in random order.

“PROGRAM”: Play the

desired tracks in a specified

order.

“REPEAT”: Play a track or all

the tracks repeatedly.

4 Change the playback time

display.

5 Move with the directional

buttons to select the button.

6 “N”: Start playing.

“X”: Pause.

“x”: Stop playing.

“.”: Find the beginning of

the current or previous track.

“>”: Find the beginning of

the next track.

“m”: Rewind.

“M”: Fast Forward.

Playing an audio CD (Continued)

7 Cancel the audio CD

operation.

8 Sound effect buttons.

Select “DIRECT” to cancel the

sound effect you chose.

9 Select a track number higher

than 20. (Appears only when

there are more than 20 tracks

on a CD.)

0 Select the track number you

want to play.

(Continued)

1

2

3

4

5

6

7

8

9

0

A

Page is loading ...

34 US

B Various playback modes

How to use the controller for

the CD operation screen

• To move the arrow: Press the

directional buttons.

• To select the items: Press the a

button.

• You can also operate with the

optional SCPH-1090U Mouse.

To play a CD until the end once

Select “N”.

To play tracks repeatedly

• To repeat the current track, select

“REPEAT” until “REPEAT 1”

appears, then select the number

of the specific track you want to

repeat.

• To repeat all the tracks, select

“REPEAT” until “REPEAT ALL”

appears, then select “N”.

To resume normal play, select

“REPEAT” until the “REPEAT”

indication disappears.

Start SoundScope

(see page 36)

Démarrez SoundScope

(voir page 37)

Inicie SoundScope

(consulte la página 37)

Playing an audio CD (Continued)

To play specific tracks

1 Select “PROGRAM”.

2 Select the number of the

specific track you want to

play.

Repeat this step until you

have selected all the tracks

you want to play.

3 Select “N”.

To resume normal play, select

“CONTINUE”.

To play the tracks in random

order

1 Select “SHUFFLE”.

2 Select “N”.

To resume normal play, select

“CONTINUE”.

C To operate the CD using

the controller

Using the buttons on the controller,

you can control basic CD

operations without looking at the

screen.

Directional buttons

Touches directionnelles

Botones de dirección

a button

Touche a

Botón a

B

C

>

M

.

m

N,X

Page is loading ...

36 US

Playing Audio CDs on your

PlayStation® (PS one

™

) will activate

the SoundScope feature, a

graphical representation of the

music you are playing (A). Using

the buttons on the controller, you

can choose your favorite image

from 24 patterns, change the color

of the image or add the effect of an

afterimage. You can also save and

load your SoundScope settings

using the memory card.

When enjoying SoundScope, set

the supplied analog controller

(DUALSHOCK®) to digital mode

and operate the CD directly with

the controller (indicator: off).

To start SoundScope operation

Press the SELECT button when the

CD operation screen is displayed.

To return to the CD operation

screen

Press the SELECT button.

* : Press these buttons while holding down the ✕ button to save the operation or

change the size of the image. For details, see “D Additional operations”.

* : Appuyez sur ces touches tout en maintenant la touche ✕ enfoncée pour

sauvegarder l’opération ou pour changer le format de l’image. Pour plus de détails,

voir “D Opérations complémentaires”.

* : Oprima estos botones mientras mantiene oprimido el botón ✕ para guardar la

operación o cambiar el tamaño de la imagen. Para más información, consulte “D

Operaciones adicionales”.

Enjoying SoundScope

B SoundScope operation

1–5 Audio CD operation:

1 Find the beginning of the

current or previous track.

2 Rewind.

3 Play / Pause.

4 Fast Forward.

5 Find the beginning of the

next track.

6 Decrease length of time image

is displayed.

7 Change the pattern of the

image.

8 Increase length of time image

is displayed.

9 Return to the CD operation

screen.

0 Add an afterimage effect to

the image.

qz Select the pattern of the image

in random order.

qs Use this button with others

for additional operations.

qd Change the color of the image.

(Continued)

A

B

34* 5*

6*

7

8*

9

0

qa

qs

qd

1*

2*

Page is loading ...

Sony Série PlayStation SCPH-141 User manual

Sony Série PlayStation SCPH-141 User manual

in other languages

Related papers

Other documents