Insignia NS-DPF5SA-09 Quick setup guide

  • Hello! I am an AI chatbot trained to assist you with the Insignia NS-DPF5SA-09 Quick setup guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Setting up your digital picture frame
1 Connect power, then extend the frame stand
and place on a  at surface.
2 Remove the remote control’s plastic battery
insert.
3 Press STAND-BY on the frame. The frame
turns on and enters Demo mode, which
displays photos already stored in the frames
internal memory.
4 Press ENTER on the remote control to exit
Demo mode.
Viewing photos on a memory card
1 Insert the memory card into the appropriate
slot on the frame. The slide show starts
automatically.
Copying all photos to the frame
1 Insert the memory card
into the appropriate
slot on the frame,
then press
on the
remote control. Photo
thumbnails appear.
2 Press DEL COPY. A copy selection menu
appears which indicates Copy All.
3 Press
, then to select YES.
4 Press ENTER on the remote control to
con rm.
Copying selected photos to the frame
1 Insert the memory card into the appropriate
slot on the frame, then press
on the
remote control. Photo thumbnails appear.
2 Press
/ / / to
highlight a thumbnail,
then press SELECT to
mark each selected
photo for copying.
3 Press DEL COPY. A copy selection menu
appears which indicates Copy Selected.
4 Press
, then to select YES.
5 Press ENTER on the remote control to
con rm.
Customer Service: www.insignia-products.com • (877) 467-4289
CF
SD, MMC,
MS, xD
USB
/