Shark HV322 User manual

Brand: Shark

Model: HV322

Category: Fireplaces

Type: User manual

This manual is also suitable for

Page is loading ...

1.800.798.7398

IMPORTANT SAFEGUARDS

FOR HOUSEHOLD USE ONLY

READ ALL INSTRUCTIONS BEFORE USE

When using an electrical appliance, basic safety precautions should

always be observed, including the following:

WARNING

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:

1 DO NOT use outdoors or on wet surfaces.

2 Unplug from electrical outlet when not in use and before servicing.

3 DO NOT use vacuum cleaner with a damaged cord or plug. If vacuum cleaner

is not working as it should, has been dropped, damaged, left outdoors, or

dropped into water, return it to EURO-PRO Operating LLC for examination,

repair, or adjustment.

4 DO NOT pull or carry vacuum cleaner by the cord or use the cord as a handle.

5 DO NOT unplug by pulling on cord; to unplug, grasp the plug, not the cord.

6 DO NOT handle plug or vacuum cleaner with wet hands.

7 DO NOT run the vacuum cleaner over the power cord, close a door on the

cord or pull cord around sharp corners.

8 The use of an extension cord is not recommended.

9 DO NOT leave vacuum cleaner when plugged in.

10 Keep cord away from heated surfaces.

11 Turn off all controls before plugging or unplugging the vacuum cleaner.

12 Always turn off the vacuum cleaner before connecting or disconnecting

motorized nozzle.

13 Store vacuum cleaner with the power cord secured around the two cord

holders - as shown in the STORAGE section.

14 This vacuum does NOT stand upright on its own.

GENERAL USE

15 Use only as described in this manual.

16 DO NOT put any objects into openings. DO NOT use with any opening

blocked; keep free of dust, lint, hair, and anything that may reduce airﬂow.

17 Keep your work area well lit.

18 Keep the vacuum cleaner moving over the carpet surface at all times to

avoid damaging the carpet ﬁbers.

19 DO NOT place vacuum cleaner on unstable surfaces such as chairs or tables.

20 DO NOT allow young children to operate the vacuum cleaner or use as a toy.

Close attention is necessary when used near children.

21 DO NOT use without dust cup and/or ﬁlters in place.

WAND ATTACHMENTS

22 DO NOT use if airﬂow is restricted; if air paths, wand, or accessories become

blocked, turn the vacuum cleaner off. Remove all obstructions before you

turn on the unit again.

23 Keep the end of the wand and accessory openings away from face and body.

24 Keep cleaning tools and wand suction openings away from hair, face,

ﬁngers, uncovered feet, or loose clothing.

25 Use only manufacturer’s recommended attachments.

DUST CUP/FILTERS/ACCESSORIES

Before turning on the vacuum:

26 Make sure all ﬁlters are thoroughly dry after routine cleaning.

27 Make sure dust cup and all ﬁlters are in place after routine

maintenance. Refer to MAINTENANCE section for ﬁlter cleaning instructions.

28 Make sure accessories are free of blockages.

29 Use only ﬁlters and accessories provided by EURO-PRO Operating LLC.

[Failure to do so will void the warranty.]

GENERAL CLEANING

30 DO NOT pick up large-sized objects.

31 DO NOT pick up hard or sharp objects such as glass, nails, screws, or coins

that could damage the vacuum cleaner.

32 DO NOT pick up smoking or burning objects such as hot coals, cigarette

butts, matches or ﬁreplace ash. DO NOT pick up drywall dust.

33 DO NOT pick up ﬂammable or combustible materials such as lighter ﬂuid,

gasoline, or kerosene or use vacuum in areas where they may be present.

34 DO NOT pick up toxic solutions such as chlorine bleach, ammonia, or drain

cleaner.

35 DO NOT use in an enclosed space where vapors are present from paint,

paint thinner, moth-prooﬁng substances, ﬂammable dust, or other explosive

or toxic materials.

36 DO NOT vacuum up any liquids.

37 DO NOT immerse vacuum cleaner in water or other liquids.

38 DO NOT use outdoors or on wet surfaces; use only on dry surfaces.

39 Use extra care when cleaning on stairs.

SAVE THESE INSTRUCTIONS

POLARIZED PLUG

To reduce the risk of electric shock, this vacuum cleaner has a polarized plug (one blade is wider than the other). As a safety feature, this plug will ﬁt into a polarized outlet only one

way. If the plug does not ﬁt fully into the outlet, reverse the plug. If it still does not ﬁt, contact a qualiﬁed electrician. DO NOT force into outlet or try to modify to ﬁt.

English

www.sharkrocket.com

Dust Cup

Release

Wand

Release

MAIN UNIT

1 Power/LO/HI Switch

2 LED Light

3 Wand Release

4 Cord Hooks (not visible)

5 On-Board Tool Clip

6 Hand Vac Storage Hook

7 Floor Nozzle Release Pedal

8 Headlights

9 Dust Cup Release

GETTING TO KNOW YOUR SHARK

ROCKET

ULTRA-LIGHT UPRIGHT

Stora

ge Hook

STEP 1 STEP 2 STEP 3

ASSEMBLY

STORAGE

1 Insert the wand into the ﬂoor nozzle connector until

you hear a “click”.

2 Insert the handheld portion into the top of the wand

until you hear a “click”.

3 This vacuum comes with a detachable clip to store

up to 2 accessories on board. Snap clip on to the

wand. Store one accessory on top holder and one

accessory on bottom holder.

OPTION 1 OPTION 2

1.800.798.7398

Recommended ways to store vacuum.

OPTION 1: Press the WAND RELEASE button on the top of

the wand to release the handheld vacuum. There is a catch

on the bottom of the handheld vacuum. Hang it from the

hook located on the bottom portion of the wand. Wrap the

cord around the two cord hooks.

OPTION 2: Use the wall mount that is included. Drill two

5/16” holes and insert plastic anchors provided into the

wall. Using a Philips head screwdriver, screw the wall

mount into the plastic anchors. There is a catch on the

bottom of the handheld vacuum. Hook it onto wall mount.

CLICK

English

STEP 1 STEP 2 STEP 3

www.sharkrocket.com

1 Plug the unit in and pull it back. 2 Slide the POWER switch to the ﬁrst position to clean

bare ﬂoor surfaces and delicate area rugs. The brush

roll will spin slowly to help with debris pick-up.

3 Slide the POWER switch to the second position to

clean carpets. The brush roll will spin faster to help

pick up debris below the surface.

1 Slip two tabs between the nozzle and the duster base and attach them to the front

fasteners. Then pull the other two tabs tightly around to the back fasteners. Ensure that

the pad is ﬂat against the bottom surface and tightly secured.

2 Slide the POWER switch to the ﬁrst position and use the Dust-Away

™

Hard Floor

Attachment to clean hard ﬂoor surfaces. Do not use to clean damp ﬂoors or wet/sticky

messes. Only use pads provided by Shark

, which are designed to work with the Dust-

Away

™

Hard Floor Attachment.

MICROFIBER PAD CARE

Machine or hand wash the pads separately in warm water with liquid detergent.

Do not use bleach or fabric softeners as they may damage or leave a coating that will

reduce the cleaning performance of the pads.

Tumble dry low or line dry to extend the life of the microﬁber fabric.

For best results, we recommend replacing your microﬁber pads every 3 to 4 months.

NOTE: This vacuum does not stand up on its own, so when taking a break, rest it against furniture, on the wall, or lay it ﬂat on the ﬂoor.

This vacuum has a 2-speed POWER slider switch, optimized for bare ﬂoor, delicate area rug and carpet cleaning.

The ﬂoor nozzle has headlights that illuminate the ﬂoor surface. The lights turn on in either speed setting.

USING THE MOTORIZED FLOOR NOZZLE

USING THE DUST-AWAY

™

HARD FLOOR ATTACHMENT

Wand

Release

STEP 1 STEP 2

1.800.798.7398

1 Stand the vacuum upright. Step on the foot pedal and

pull the wand up to disconnect from the ﬂoor nozzle.

Attach desired cleaning accessory.

NOTE: Both power settings provide the same suction

power.

2 Press the WAND RELEASE button on the top of the

wand to disconnect it from the handheld portion.

Attach desired cleaning accessory. The LED light in

the handheld vacuum turns on automatically when

the power is on.

TIP: You can attach the handheld vacuum directly to

the ﬂoor nozzle for convenient cleaning on stairs.

Videos of helpful tips on how to use accessories can be found in the Support section on www.sharkrocket.com

This vacuum has the reach to clean above ﬂoors or in tight spaces by using the wand.

It’s also a convenient handheld vacuum when using it without the wand.

ABOVE FLOOR CLEANING

English

DO NOT SCALE DRAWING

650_motorized_5_asm

SHEET 1 OF 1

UNLESS OTHERWISE SPECIFIED:

SCALE: 1:5

WEIGHT:

REV

DWG. NO.

SIZE

TITLE:

NAME

DATE

COMMENTS:

Q.A.

MFG APPR.

ENG APPR.

CHECKED

DRAWN

FINISH

MATERIAL

INTERPRET GEOMETRIC

TOLERANCING PER:

DIMENSIONS ARE IN INCHES

TOLERANCES:

FRACTIONAL

ANGULAR: MACH

BEND

TWO PLACE DECIMAL

THREE PLACE DECIMAL

APPLICATION

USED ON

NEXT ASSY

PROPRIETARY AND CONFIDENTIAL

THE INFORMATION CONTAINED IN THIS

DRAWING IS THE SOLE PROPERTY OF

<INSERT COMPANY NAME HERE>. ANY

REPRODUCTION IN PART OR AS A WHOLE

WITHOUT THE WRITTEN PERMISSION OF

<INSERT COMPANY NAME HERE> IS

PROHIBITED.

CREVICE TOOLS

a - 12” Crevice Tool

Clean in between tight spaces or

reach baseboards and ceilings with

this slim crevice tool. (163FLIHV3)

b - 18” Flexible Crevice Tool

Extend and ﬂex to an 18” length to

access corners, baseboards, tight

spaces or ceilings. The rubberized

tip prevents scratches on surfaces.

(228FFJV300)

c - Duster Crevice

Two cleaning tools in one. The

crevice tool gives you extended

cleaning reach for small spaces,

while the dusting brush cleans a

multitude of surfaces. (164FLIHV3)

a b c

DUSTING BRUSHES

d - Upholstery Tool

Perfect for grabbing pet hair

and lint from furniture and other

upholstered surfaces.

(166FLIHV3)

e - Wide Upholstery Tool

Perfect for grabbing pet hair and

lint from furniture, mattresses and

other upholstered surfaces.

(165FLIHV3)

f - Dusting Brush

Great for dusting a multitude of surfaces

such as shelves, tables, baseboards,

window/door frames, and much more.

Turn the brush head to adjust the

angle to the surface you’re cleaning.

(229FFJV300)

d e

Multi-Angle Dusting Brush

5-position soft dusting brush for

cleaning shelves (straight out/

downward orientation), blinds,

walls, ceiling fans and lights

(upward and downward orientation).

Adjust the angle of this brush to the

desired cleaning surface. (137FLIV300)

TruePet

™

Motorized Brush

The power of a full size upright in the

palm of your hand. Picks up pet hair, loose

debris, and powerfully cleans dander out

of upholstery and surfaces.

(168FLV322B)

Pet Multi Tool

Two cleaning tools in one. The stiff

bristle brush gets stuck-on debris

off a multitude of surfaces. Remove

the bristles to reveal an upholstery

tool for removing stubborn pet hair

from upholstery and more. (1126FT323)

Flexible Hose

Stretch and ﬂex this extension hose to clean around

objects and get into hard to reach spaces. Attach the

crevice tool or another accessory depending on what

you are cleaning. (290FFJ321)

Dust-Away

™

Hard Floor Attachment with Washable

Microﬁber Pad

Direct suction for big crumbs and debris while microﬁber pad

dusts hard wood and tile ﬂoors.

(XHFGV321, P200W)

Appliance Wand

Clean under and behind hard to move appliances and furniture with this adjustable 36” tool. Flip the extension

piece over to clean the underside of appliances. (138FLIV300)

Home and Car Detail Kit

Extension wands and micro tools to clean the tightest spaces. (XCDV300).

www.sharkrocket.com

Select cleaning accessories are included.

LOOKING FOR MORE? To enhance your cleaning experience, additional accessories are available for purchase at www.sharkrocket.com or by calling 1.800.798.7398.

For a list of what is included with this model, refer to inside ﬂap of box.

ACCESSORIES

Empty

Monthly

STEP 1

STEP 2

1.800.798.7398

To keep your vacuum’s suction power optimal, follow these instructions.

Make sure unit is off and cord unplugged.

EMPTY THE DUST CUP

1 Press the WAND RELEASE button on the top of the

wand to disconnect it from the handheld portion.

Remove the dust cup from the handheld vacuum by

squeezing the two DUST CUP RELEASE buttons on

both sides of the base at the same time and pulling it

out.

2 Hold dust cup over a trash bin and press the EMPTY

button on the front of the dust cup. The bottom lid

will open, allowing the debris to fall out.

NOTE: Clean the dust screen inside the dust cup as

required.

3 Once dust cup is empty, close the bottom lid and

insert dust cup back into handheld and you will hear it

click into place.

NOTE: Empty dust cup when debris reaches the MAX

ﬁll line.

CLEAN THE FILTERS

1 Access the Pre-Motor foam and felt ﬁlters by lifting

the latch on the top of the handheld vacuum. Remove

and hand wash them every month. Let air dry

completely before replacing. Tap loose dirt off ﬁlters

between washes as needed. Insert the felt ﬁlter ﬁrst

and then place the foam ﬁlter on top of it.

2 Access the Post-Motor ﬁlter under the handle.

Remove and hand wash once a year. Let air dry

completely before replacing.

TO CHECK FOR BLOCKAGES, REMOVE AND INSPECT:

HANDHELD AND WAND

1 Remove the wand from the handheld portion and

check all dust cup intake openings.

2 Remove the ﬂoor nozzle from the wand and check the

wand for blockages.

BOTTOM OF FLOOR NOZZLE

1 Use a coin to unlock the three locks on the bottom of

the ﬂoor nozzle.

2 A portion of the base is removable to allow for better

access to the brushroll and exposure to the airway.

Shine a ﬂashlight from the bottom to check for

possible blockage in the airway.

3 Remove any string, carpet ﬁbers or hair that may be

wrapped around the brushroll. There is a groove along

the brush bar that allows a pair of scissors to cut

across it to loosen up the debris.

4 To re-assemble, replace base by lining it up along the

front of the nozzle. Push down to snap into place until

you hear a click. Lock the three locks.

Post-Motor ﬁlter

(1084FTV320)

Pre-Motor ﬁlters

(1080FTV320)

Foam

Felt

English

MAINTENANCE

www.sharkrocket.com

Vacuum is not picking up dirt. No suction or light suction • Check ﬁlters to see if they need cleaning. Follow instructions for rinsing and drying the ﬁlters before re-

inserting back into the vacuum.

• Dust cup may be full; empty dust cup.

• Check wand, wand connections, nozzles, and accessories for blockages; clear blockages if required.

• Remove any string, carpet ﬁbers or hair that may be wrapped around the brushroll.

Vacuum lifts area rugs • Suction is powerful. Take care when vacuuming area rugs or rugs with delicately sewn edges.

• Turn off the unit and disengage the area rug from the brushroll and restart the unit.

Brush roll does not spin • If brush roll indicator light on the ﬂoor nozzle turns red, the brush roll has stopped spinning. Immediately turn

off and unplug vacuum, disconnect the nozzle and remove blockage before reconnecting and turning vacuum

back on.

• If brush roll indicator light on the ﬂoor nozzle is green, the blockage has been successfully cleared. If the light

is still red, please contact customer service at 1.800.798.7398.

Vacuum turns off on its own • This vacuum cleaner is equipped with a motor protective thermostat. If for some reason your vacuum

overheats, the thermostat will automatically turn the suction motor off. Should this occur, perform the

following steps to restart the thermostat:

1. Turn the unit off.

2. Unplug the vacuum.

3. Empty the dust cup and clean ﬁlters (see page previous page)

4. Check for blockages in wand, accessories and inlet openings.

5. Allow the unit to cool for a minimum of 45 minutes.

6. Plug in the vacuum.

7. Restart the unit by turning the power on.

EURO-PRO Operating LLC warrants this product to be free from material defects and workmanship for a period of ﬁve (5) years from the date of purchase when utilized for normal household use, subject

to the following conditions, exclusions and exceptions.

The liability of EURO-PRO Operating LLC is limited solely to the cost of the repair or replacement of the unit at our option. This Limited Warranty does not cover normal wear of parts and does not apply

to any unit that has been tampered with or used for commercial purposes. This Limited Warranty does not cover damage caused by misuse, abuse, negligent handling or damage due to faulty packaging

or mishandling in transit. This Limited Warranty does not cover damage or defects caused by or resulting from damages from shipping or repairs, service or alteration to the product or any of its parts,

which have been performed by a repair person not authorized by EURO-PRO Operating LLC.

If your appliance fails to operate properly while in use under normal household conditions within the warranty period, you may return the complete appliance and accessories with proof of purchase and

date, freight prepaid. For assistance with warranty service options or customer support, please call our customer care and product specialists at 1-800-798-7398 or visit our website at www.sharkrocket.

com.

If the appliance is found by EURO-PRO Operating LLC to be defective, in EURO-PRO Operating LLC’s sole discretion, we will repair or replace it free of charge. Proof of purchase is required and a fee

of $19.95 will apply to cover the cost of return freight.*

Non-durable parts including, without limitation, ﬁlters, brushes and electrical parts which normally require replacement are speciﬁcally excluded from warranty.

This Limited Warranty is extended to the original purchaser of the unit and excludes all other legal, implied and/or conventional warranties. The responsibility of EURO-PRO Operating LLC if any, is limited

to the speciﬁc obligations expressly assumed by it under the terms of this Limited Warranty. In no event is EURO-PRO Operating LLC liable for incidental or consequential damages to anyone of any nature

whatsoever. Some states do not permit the exclusion or limitation of incidental or consequential damages, so the above may not apply to you.

This Limited Warranty gives you speciﬁc legal rights, and you may also have other rights which vary from state to state or province to province.

*IMPORTANT: Carefully pack item to avoid damage in shipping. Be sure to include proof of purchase date and to attach a tag to item before packing including your name, complete address and phone

number with a note giving purchase information, model number and what you believe is the problem with the item. We recommend you insure the package (as damage in shipping is not covered by your

warranty). Mark the outside of your package “ATTENTION CUSTOMER SERVICE”.

Euro-Pro, Shark and Rocket are registered trademarks of Euro-Pro Operating LLC.

TruePet and Dust-Away are trademarks of Euro-Pro Operating LLC.

TROUBLE-SHOOTING GUIDE

FIVE-YEAR (5) LIMITED WARRANTY

Page is loading ...