Runtru E4HL5042A1000A Owner's manual

Type
Owner's manual

Runtru E4HL5042A1000A is a split system heat pump designed to provide efficient heating and cooling for residential applications. With a cooling capacity of up to 5°F, this unit ensures comfortable indoor temperatures even in extreme weather conditions. Equipped with a variable-speed compressor, it delivers precise temperature control while maximizing energy savings. The outdoor unit features a durable, weather-resistant construction and is protected by a glossy corrosion-resistant finish. Its low-noise operation ensures a peaceful environment without compromising performance.

Runtru E4HL5042A1000A is a split system heat pump designed to provide efficient heating and cooling for residential applications. With a cooling capacity of up to 5°F, this unit ensures comfortable indoor temperatures even in extreme weather conditions. Equipped with a variable-speed compressor, it delivers precise temperature control while maximizing energy savings. The outdoor unit features a durable, weather-resistant construction and is protected by a glossy corrosion-resistant finish. Its low-noise operation ensures a peaceful environment without compromising performance.

Submittal
Split System Heat Pump
E4HL5042A1000A
E4HL5042A-SUB-1A-EN
NOTE: “Graphics in this document are for
representation only. Actual model may differ
in appearance.”
2
Outline Drawing
Model A B C D E F G H
E4HL5042A1000A 52.40 37.40 13.39 14.76 16.10 4.00 6.37 3.75
All dimensions are in inches
NOTE: ALL DIMENSIONS ARE REFERENCE DIMENSIONS
SOUND POWER LEVEL
Model A-Weighted Sound
Power Level [dB(A)]
Full Octave Sound Power [dB]
63Hz* 125Hz 250Hz 500Hz 1000Hz 2000Hz 4000Hz 8000Hz
E4HL5042A1000A 68 66 62 60 63 67 57 48 38
Note: Rated in accordance with AHRI Standard 270–2015 *For reference only.
3
Product Specifications
OUTDOOR UNIT (a) E4HL5042A1000A
POWER CONNS. — V/PH/HZ (b) 208/230/1/60
MIN. CIR. AMPACITY 31
MAX. OVERCURRENT
PROTECTION 50
COMPRESSOR Rotary
NO. USED — NO. STAGES 1-VARIBLE
VOLTS/PH/HZ 208/230/1/60
R.L. AMPS (c) 21.6
FACTORY INSTALLED
START COMPONENTS (d) NO
INSULATION/SOUND BLANKET YES
COMPRESSOR HEAT NO
OUTDOOR FAN PROPELLER
DIA. (IN.) — NO. USED 20-7/8"-2
TYPE DRIVE — NO. SPEEDS DIRECT — VARIBLE
NO. MOTORS — HP 2-1/10
CFM @ 0.0 IN. W.G. (e) 4200
MOTOR SPEED R.P.M. 850
VOLTS/PH/HZ 208/230/1/60
F.L. AMPS 1.45
OUTDOOR COIL — TYPE PLATE FIN
ROWS — F.P.I. 2-17
FACE AREA (SQ. FT.) 14.34
TUBE SIZE (IN.) 3/8"
REFRIGERANT CONTROL ELEC. EXPANSION
VALVE
REFRIGERANT
LBS. – R-410A (O.D. UNIT) (f) 9 LBS, 14 OZ
FACTORY SUPPLIED YES
LINE SIZE — IN. O.D. GAS 7/8"
LINE SIZE — IN. O.D. LIQ. 3/8"
CHARGING SPECIFICATIONS
SUBCOOLING 5°F
DIMENSIONS H x W x D
CRATED (IN.) 41-3/8"×54"×19-1/8"
UNCRATED (IN.) 37-3/8"×52-3/8"×14-
3/8"
WEIGHT
Shipping 238
Net (Lbs.) 231
(a) Certified in accordance with the Air-Source
Unitary Air-conditioner Equipment certification
program, which is based on AHRI standard
210/240.
(b) Calculated in accordance with Natl. Elec.
Codes. Use only HACR circuit breakers or fuses.
(c) This value shown for compressor RLA on the
unit nameplate and on this specification sheet is
used to compute minimum branch circuit
ampacity and max. fuse size. The value shown
is the branch circuit selection current.
(d) No means no start components.
(e) Standard Air — Dry Coil — Outdoor
(f) This value is approximate. For more precise
value see unit nameplate.
4
Mechanical Specification Options
General
The outdoor condensing units are factory
charged with the system charge required for the
outdoor condensing unit, ten (10) feet of tested
connecting line, and the smallest rated indoor
evaporative coil match. This unit is designed to
operate at outdoor ambient temperatures as high
as 115°F. Cooling capacities are matched with a
wide selection of air handlers and furnace coils
that are AHRI certified. The unit is certified to UL
60335-2-40. Exterior is designed for outdoor
application.
Casing
Unit is painted with a glossy corrosion resistant
finish on all panels. Unit casing is constructed of
heavy gauge, galvanized steel and painted with a
weather-resistant powder paint finish. All panels
are subjected to our 500 hour salt spray test.
Refrigerant Controls
Refrigeration system controls include condenser
fan, compressor drive and low pressure switches.
Compressor
The compressor features external over
temperature and pressure protection. Other
features include: Centrifugal oil pump and low
vibration and noise.
Condenser Coil
The outdoor coil provides low airflow resistance
and efficient heat transfer. The coil is protected
on all four sides by grilles and panels.
Low Ambient Cooling
As manufactured, this system has a cooling
capacity to 5°F.
About Trane and American Standard Heating and Air Conditioning
Trane and American Standard create comfortable, energy efficient indoor environments for residential
applications. For more information, please visit www.trane.com or www.americanstandardair.com
E4HL5042A-SUB-1A-EN 24 Apr 2023
Supersedes (New) ©2023
The AHRI Certified mark indicates company participation in the AHRI Certification program. For
verification of individual certified products, go to ahridirectory.org.
The manufacturer has a policy of continuous data improvement and it reserves the right to change
design and specifications without notice. We are committed to using environmentally conscious print
practices.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Runtru E4HL5042A1000A Owner's manual

Type
Owner's manual

Runtru E4HL5042A1000A is a split system heat pump designed to provide efficient heating and cooling for residential applications. With a cooling capacity of up to 5°F, this unit ensures comfortable indoor temperatures even in extreme weather conditions. Equipped with a variable-speed compressor, it delivers precise temperature control while maximizing energy savings. The outdoor unit features a durable, weather-resistant construction and is protected by a glossy corrosion-resistant finish. Its low-noise operation ensures a peaceful environment without compromising performance.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI