RETROFITLAB DRL Operating instructions

Hello! I've reviewed the provided instructions for the LED Shrouds wire harness. These instructions detail the wiring connections for daytime running lights (DRL), turn signals and low-beam functionality. I'm ready to assist you with any questions you may have about the device or its installation, just ask.
What does wire 1 connect to?

What does wire 2 connect to?

What does wire 3 connect to?

What does wire 4 connect to?

Instructions

WIRE HARNESS LAYOUT - LED SHROUDS

(DRL + TURN SIGNAL)

WWW.RETROFITLAB.COM

1. Connect to positive (12v+) of the daytime running light

2. Connect to negative (-) of the daytime running light

3. Connect to positive (12v+) of the turn signal

4. Connect to the Positive (12V+) of the low-beam signal*

*T    DRL  -  . I  

HID/   ,  +      .