FAQs How do I pair my phone User manual

Hello! I have read the user manual for the Alpine CD Receiver, Digital Media Receiver, and NAVI head units. This document provides instructions on how to pair your phone with your Alpine head unit using Bluetooth, with or without Secure Simple Pairing (SSP). I understand the steps involved and can assist you with any questions.
What Bluetooth devices can be paired?

What is the PIN code for Bluetooth pairing without SSP?

What should I do if "PAIR NO" is selected during pairing with SSP?

How do I pair my phone with my Alpine head unit?

Rating: 1/5 from 1 votes | Last Updated: Mon, Oct 9, 2017 at 11:52 PM

Pairing a BLUETOOTH compatible device with SSP (Secure Simple Pairing)

1 Using your BLUETOOTH compatible device, search for available Bluetooth devices. Then select

the“Alpine CD Receiver”, “Alpine Digital Media Receiver” or “Alpine NAVI ”for pairing.

2 Turn the Rotary encoder to change the head unit display from “PAIR NO” to “PAIR YES”, and then

press ENTER.

If “PAIR NO” is selected, the connection will be canceled.

3 If the pairing was successful, “CONNECTED” is displayed for a few seconds. The head unit then

returns to its previous state.

Pairing a BLUETOOTH compatible device without SSP (Secure Simple Pairing)

1 Using your BLUETOOTH compatible device, search for available Bluetooth devices. Then select

the“Alpine CD Receiver” or “Alpine Digital Media Receiver” or “Alpine NAVI ”for pairing.

2 Input the PIN code (“0000”) in a BLUETOOTH compatible device.

Note

• The PIN code is fixed as “0000”.

3 If the pairing was successful, “CONNECTED” is displayed

for a few seconds. The head unit then returns to its

previous state.

Posted by: Alpine KB - Mon, Oct 9, 2017 at 11:52 PM. This article has been viewed 160877 times.

Online URL: /article/how-do-i-pair-my-phone-with-my-alpine-head-unit.html