2. NewLine
  3. q series
q series

NewLine q series Installation guide

  • Hello! I've reviewed the user manual for installing the Wi-Fi Module on the newline Q Series displays. This manual provides step-by-step instructions, along with a caution about not hot-plugging the module. I'm ready to answer any questions you might have about the installation process.
  • What do I need to do before installing the Wi-Fi Module?
    How do I install the Wi-Fi Module?
    Can I insert or remove the Wi-Fi Module while the display is powered on?
Q Series How To
1. Unscrew the 2 screws on the Wi-Fi Module port and remove the shielding cover.
Perform the following steps to install the Wi-Fi Module on the Q Series.
2. Insert the Wi-Fi Module into the port on the rear of the panel until rmly seated, using the 2 screws to secure it.
Contact Us
Still need additional assistance? Contact our Technical Support Team at 833-469-9520, ext 5000
or suppor[email protected].
How to Install Wi-Fi Modules
Caution
The Wi-Fi Module does not support hot plugging. Therefore, you must
insert or remove the Wi-Fi Module when the display is powered off.
Otherwise, the displays or Wi-Fi Module may be damaged.
/