Copyright © 2022 Open Text. All Rights Reserved. Trademarks owned by Open Text.
For more information, visit: https://www.opentext.com/about/copyright-information • 03.22 | 20113.EN
opentext.com/contact
For SATA Drive Use a Tableau SATA/SAS Signal & Power cable [TC4-8-R2]
For IDE Drive Use a Tableau IDE Data cable [TC6-8] and Tableau IDE Power
cable [TC2-8-R2]
For USB Drive Use cable supplied with USB drive enclosure or directly connect
For SAS Drive* Use a Tableau SATA/SAS Signal & Power cable [TC4-8-R2]
For Power(DC In) Use a Tableau Power Supply [TP5]
For Firmware
Updates
Use a Tableau USB cable [TC8]
* Tableau Duplicator SAS Expansion Module [TDP6] (sold separately) is needed
for SAS drives.
