MF3000PWR-L

VISUAL COMFORT MF3000PWR-L User manual

  • I have reviewed the assembly instructions for the Table Lamp MF 3000. This document outlines the steps required to assemble the Avedon Small Table Lamp, including installing the harp, shade, and bulb. It also provides care instructions, stating that only a soft dry cloth or feather duster should be used for cleaning. I'm ready to answer your questions about the lamp and its assembly process.
  • What tool is required for assembly?
    What should be used to clean the lamp?
    Is the bulb included with the lamp?
Avedon Small Table Lamp
Item # MF 3000
ASSEMBLY INSTRUCTIONS
This light fixture should be installed in accordance with all applicable,
local installation codes, and by a person familiar with the construction
and operation of it, as well as the hazards involved. Inspect item and
contents carefully. If any damage or defect is found, do not install.
Retain all packaging material until installation is complete and approved.
NOTICE:
TOOLS REQUIRED (NOT INCLUDED):
Scissors
1. Carefully remove all parts from the box. Place on a clean, soft surface.
2. Install harp (C) by squeezing together and inserting into the top of
saddle (D).
3. Remove finial (A) from harp (C).
4. Remove shade (B) from packaging and install to harp (C) using
finial (A).
NOTE: If shade has additional packaging, carefully cut off from
interior of shade to avoid damages.
5. Install light bulb into the socket.
6. Remove protective cover (E) from plug.
7. Plug into electrical outlet and test the fixture.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do
not use abrasive or chemical agents.
US
M
L
I
D
S
E
T
LED
A
C
D
E
Bulb not included
B (Packaged separately)
/