Saxby 94430 User manual

Instruction manual

94430, 94431

IkonPRO CCT

Installation

94430

94431

Note that the switch is turned off before installation. Please refer to the drawings and images shown below:

Thank you for purchasing this light ﬁtting. Please

read the instruction carefully before use to ensure

safe and satisfactory operation of this product.

Please retain these instruction for future reference.

These units are used with existing IkonPro CCT Kit item below respectively:

94430-25mm is suitable for use with 73347 IkonPro CCT 25mm Kit;

94431-35mm is suitable for use with 73348 IkonPro CCT 35mm Kit.

Kit Layout Diagram

Add-on head

The add-on head is connected

at the end of kit

* Max. 10 add-on heads, Max. 20 heads per kit

73347 IkonPro CCT 25mm Kit

73348 IkonPro CCT 35mm Kit

94430-25mm

94431-35mm

Saxby Lighting. BH17 7BY

V1 13/08/2020