VISUAL COMFORT KW3932 User manual

Brand: VISUAL COMFORT

Model: KW3932

Type: User manual

Onda Medium Table Lamp

Item # KW3932

ASSEMBLY INSTRUCTIONS

This light fixture should be installed in accordance with all applicable,

local installation codes, and by a person familiar with the construction

and operation of it, as well as the hazards involved. Inspect item and

contents carefully. If any damage or defect is found, do not install.

Retain all packaging material until installation is complete and approved.

NOTICE:

A

B

D

F

E

Bulb not included

C (Packaged separately) TOOLS REQUIRED (NOT INCLUDED):

Scissors

1. Carefully remove all parts from the box. Place on a clean, soft surface.

2. Install harp (D) by squeezing together and inserting into the top of

saddle (E).

3. Remove finial (B) from harp (D).

4. Remove shade (C) from packaging and install to harp (D) using

finial (B).

NOTE: If shade has additional packaging, carefully cut off from

interior of shade to avoid damages.

5. Install light bulb into the socket.

6. Place diffuser (A) on the top of shade (C).

7. Remove protective cover (F) from plug.

8. Plug into electrical outlet and test the fixture.

Care Instructions: Clean only with a soft dry cloth or feather duster. Do

not use abrasive or chemical agents.

US

M

L

I

D

S

E

T

LED

Onda Medium Table Lamp

Item # KW3932

UNPACKING NOTICE

Please follow instructions below to avoid possible damages caused by

improper removal.

NOTICE:

1. Open box and remove top layer of packaging.

2. Carefully lift body by fabric handles while supporting other end of body

until clear of packaging. Place upright on a clean, soft surface.

1
2

VISUAL COMFORT KW3932 User manual

Brand: VISUAL COMFORT

Model: KW3932

Type: User manual

Download PDF

Related papers

Other documents