Minka Lavery 4716-892 User manual

4716-892
Brand
Minka Lavery
Model
4716-892
Type
User manual

Minka Lavery 4716-892 is a versatile light fixture that offers a traditional design with modern functionality. It features a chain-hung design with a canopy, allowing you to adjust the hanging height to suit your needs. The fixture accommodates six candelabra base bulbs up to 60 watts each, providing ample illumination for your space. With its classic style and adjustable height, the Minka Lavery 4716-892 is a great choice for adding a touch of elegance to any room.

Minka Lavery 4716-892 is a versatile light fixture that offers a traditional design with modern functionality. It features a chain-hung design with a canopy, allowing you to adjust the hanging height to suit your needs. The fixture accommodates six candelabra base bulbs up to 60 watts each, providing ample illumination for your space. With its classic style and adjustable height, the Minka Lavery 4716-892 is a great choice for adding a touch of elegance to any room.

INSTALLATION INSTRUCTIONS
For item #4716-892
READ AND SAVE THESE INSTRUCTIONS
WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.
AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.
PREPARING FOR INSTALLATION (Fig. 1 & Fig. 2)
1. Shut off the power at the fuse box or circuit breaker. If
necessary, remove old xture including mounting hardware.
2. Carefully remove the xture from the carton and check that
all parts are included as shown in the illustration.
3. Pass xture wires up through center stem (M). Screw center
stem (M) to xture body. Pass xture wires up through xture
loop (P). Screw xture loop (P) to center stem (M).
4. Attach all thread (E) with two hex nuts pointing down to
mounting bracket (A) with ground screw pointing down
until you reach the hex nut. Secure with hex nut (X). Screw
canopy loop (W) onto the other end of all thread (E).
5. Secure mounting bracket (A) to junction box with junction
box screws (B).
6. Attach quick link (G) to xture loop (P) and chain (H).
Completely close quick link (G). Determine desired hanging
height of xture. Use chain pliers to open chain links.
Remove excess chain. Weave xture wires through chain
links. Attach quick link (G) and slide canopy ring (F) and
canopy (D) over chain and xture wires. Attach quick link (G)
to canopy loop (W). Ensure quick link is completely closed.
7. Feed wires through canopy loop (W) and all thread (E). Pull
xture wires tight.
CONNECTING THE WIRES (Fig. 3)
8. Connect the electrical wires as shown in Fig. 2, making sure
that all wire connectors are secured. If your junction box has
a ground wire (green or bare copper), connect the xture’s
ground wire to it. Otherwise, connect the xture’s ground wire
directly to the crossbar (A)using the green screw provided.
9. Tuck wire connections neatly into junction box.
INSTALLING THE FIXTURE (Fig. 1)
10. Slide canopy (D) over canopy loop (W) and secure with
canopy ring (F).
11. Slide cups (K) over sockets.
12. Install (6) six candelabra base bulbs up to 60 watts each or
CFL or LED equivalent (not included) in accordance with the
xture specication—DO NOT EXCEED THE MAXIMUM
WATTAGE RATING! (NE PAS DEPASSER LA PUISSANCE
NOMINALE MAXIMALE!)
Fig. 1
FIXTURE
WIRES
Black or
Smooth
HOUSE
WIRES
Black
(Hot)
FIXTURE
WIRES
White or
Ribbed
HOUSE
WIRES
White
(Neutral)
FIXTURE
WIRES
Bare
Copper
(Ground)
HOUSE
WIRES
Green
(Ground)
Fig. 3
M
P
K
BULB (not
included)
SOCKET
Fig. 2
H
A
B
G
G
P
DF
WE
X
Notice: It is important to use proper chain pliers (not included)
To OPEN and CLOSE the chain included with this xture. Do
not open them with other tools that may twist or stress the
chain links. It is important to use proper chain pliers like the
ones shown in the diagram.
Your installation is now complete. Return power to the junction
box and test the xture.
  • Page 1 1

Minka Lavery 4716-892 User manual

4716-892
Brand
Minka Lavery
Model
4716-892
Type
User manual

Minka Lavery 4716-892 is a versatile light fixture that offers a traditional design with modern functionality. It features a chain-hung design with a canopy, allowing you to adjust the hanging height to suit your needs. The fixture accommodates six candelabra base bulbs up to 60 watts each, providing ample illumination for your space. With its classic style and adjustable height, the Minka Lavery 4716-892 is a great choice for adding a touch of elegance to any room.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents