2. Fisher & Paykel
  3. CPV3-485GD-L
CPV3-485GD-L

Fisher & Paykel CPV3-485GD-L User guide

  • Hello! I'm a chat assistant ready to help you with information about the Fisher & Paykel Gas Rangetop Professional CPV3-485. This document provides detailed product dimensions, cutout specifications, required clearances for installation, and electrical and gas requirements. I've reviewed the datasheet and can answer your questions about it.
  • What is the minimum width of the ventilation hood installed above the cooktop?
    What is the minimum clearance from the left and right edge of the cooktop to the nearest vertical combustible surface?
    What is the minimum vertical distance between countertop and cabinet extending above counter?
DATA SHEET
Gas Rangetop, 48", Professional
8"
A
FRONT VIEW
PLAN VIEW
PROFILE VIEW
47 7/8"
c
g
d
f
H
e
K
L
I
J
b
28 1/8"
INDICATES CABINETRY ---------------------------------------------------
INDICATES CABINETRY / PRODUCT DATUM -------------------------
INDICATES COOK SURFACE REFERENCE -----------------------------
DATE: 14.6.2021
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Please read the installation manual for detailed information on installing the
product. For full installation instructions & specifications visit fisherpaykel.com
0 5 10 20
inches
m
Model no:
CPV3-485
(refer page  for metric measurements)
Product Dimensions
in
a Height below countertop datum to bottom of chassis
8"
B Overall height of product (bottom of chassis to top of grates)
9 15/16"
c Overall width of cooktop
47 7/8"
D Overall depth of cooktop
28 1/8"
e Height from countertop datum to top of grates
2"
f Height from countertop datum to cook surface
/8"
g Height of chassis
8 /8"
h Depth from rear of chassis to cabinetry datum - projecting
24 /16"
i Depth from rear of chassis to cabinetry datum - flush
26 5/8"
j Depth of control panel
2 1/2"
k Distance from left edge of chassis to centreline of gas inlet
 5/16"
l Distance from left edge of chassis to centreline of power cord
10 1/2"
m Distance from rear edge of chassis to centreline of gas/power
1 11/16"
n Height of gas regulator assembly
4 /8"
o Height from cook surface to top of control panel
2"
Cutout Dimensions
in
Overall height of cutout
8"
Overall width of cutout
48"
Overall depth of cutout for projecting control panel
Overall depth of cutout for flush control panel
max 24 /16"
max 26 11/16"
n
o
DATUM :
CABINET SURFACE
BELOW COOKTOP
DATUM :
TOP OF
COUNTERTOP
COOK SURFACE
REFERENCE
CABINET FACE
FOR FLUSH
CONTROL PANEL
CABINET FACE
FOR PROJECTING
CONTROL PANEL
CABINET FACE FOR
FLUSH CONTROL PANEL
CABINET FACE FOR
PROJECTING CONTROL PANEL
Model no:
CPV3-485
(refer page 4 for metric measurements)
Clearance Dimensions
in
a Minimum width of ventilation hood installed above cooktop
- not shown*
48"
B Minimum vertical distance between countertop and cabinet
extending above counter
18"
c Minimum clearance from left and right edge of cooktop to
nearest vertical combustible surface
12"
D Minimum clearance from rear edge of cutout to nearest
combustible surface
2"
e Minimum clearance from cook surface to:
- combustible surface centered above the cook surface
- ventilation hood centered above the cook surface
- non-combustible surface centered above the cook surface
54"
6"
0"
f Maximum overall depth of overhead cabinetry
1"
Specifications
Electrical
Supply
120 VAC, 60 Hz
Service
15 amp circuit
Gas - Natural
Connection
1/2" NPT Minimum 5/8" dia. flex line
Supply Pressure
Supply Pressure 6" to 9" W.C.
Gas - LP
Connection
1/2" NPT Minimum 5/8" dia. flex line
Supply Pressure
Supply Pressure 11" to 14" W.C.
DATA SHEET
Gas Rangetop, 48", Professional
0 5 10 20
inches
INDICATES CABINETRY ---------------------------------------------------
INDICATES CABINETRY / PRODUCT DATUM -------------------------
INDICATES CABINETRY CLEARANCES --------------------------------
INDICATES COOK SURFACE REFERENCE -----------------------------
DATE: 14.6.2021
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Please read the installation manual for detailed information on installing the
product. For full installation instructions & specifications visit fisherpaykel.com
FRONT VIEW
PLAN VIEW
PROFILE VIEW
DATUM :
CABINET SURFACE
BELOW COOKTOP
DATUM :
TOP OF COUNTERTOP
COOK SURFACE REFERENCE
CABINET FACE
FOR FLUSH
CONTROL PANEL
CABINET FACE
FOR PROJECTING
CONTROL PANEL
CABINET FACE FOR
FLUSH CONTROL PANEL
CABINET FACE FOR
PROJECTING CONTROL PANEL
B
F
CLEARANCE:
ADJACENT OVERHEAD
CABINET
DEPTH OF
OVERHEAD CABINET
E
E
E
CLEARANCE:
NON-COMBUSTIBLE
SURFACE
CLEARANCE:
VENTILATION HOOD
CLEARANCE: COMBUSTIBLE SURFACE
CLEARANCE: COMBUSTIBLE SURFACE
CLEARANCE: NON-COMBUSTIBLE SURFACE
CLEARANCE: COMBUSTIBLE SURFACE
CLEARANCE: COMBUSTIBLE SURFACE
D D
D
CLEARANCE: NON-COMBUSTIBLE SURFACE
D
c
CLEARANCE: COMBUSTIBLE SURFACE
c
Model no:
CPV3-485
(refer page 1 for imperial measurements)
Product Dimensions
mm
a Height below countertop datum to bottom of chassis
20
B Overall height of product (bottom of chassis to top of grates)
25
c Overall width of cooktop
1216
D Overall depth of cooktop
714
e Height from countertop datum to top of grates
50
f Height from countertop datum to cook surface
10
g Height of chassis
21
h Depth from rear of chassis to cabinetry datum - projecting
614
i Depth from rear of chassis to cabinetry datum - flush
677
j Depth of control panel
64
k Distance from left edge of chassis to centreline of gas inlet
84
l Distance from left edge of chassis to centreline of power cord
267
m Distance from rear edge of chassis to centreline of gas/power
4
n Height of gas regulator assembly
111
o Height from cook surface to top of control panel
51
Cutout Dimensions
mm
Overall height of cutout
20
Overall width of cutout
1219
Overall depth of cutout for projecting control panel
Overall depth of cutout for flush control panel
max 614
max 677
DATA SHEET
Gas Rangetop, 48", Professional
0 100 200 400
millimetres
INDICATES CABINETRY ---------------------------------------------------
INDICATES CABINETRY / PRODUCT DATUM -------------------------
INDICATES COOK SURFACE REFERENCE -----------------------------
DATE: 14.6.2021
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Please read the installation manual for detailed information on installing the
product. For full installation instructions & specifications visit fisherpaykel.com
203
A
FRONT VIEW
PLAN VIEW
PROFILE VIEW
1216
c
g
d
f
H
e
K
L
I
J
b
714
m
DATUM :
CABINET SURFACE
BELOW COOKTOP
DATUM :
TOP OF
COUNTERTOP
COOK SURFACE
REFERENCE
CABINET FACE
FOR FLUSH
CONTROL PANEL
CABINET FACE
FOR PROJECTING
CONTROL PANEL
CABINET FACE FOR
FLUSH CONTROL PANEL
CABINET FACE FOR
PROJECTING CONTROL PANEL
n
o
Model no:
CPV3-485
(refer page 2 for imperial measurements)
Clearance Dimensions
mm
a Minimum width of ventilation hood installed above cooktop
- not shown*
1219
B Minimum vertical distance between countertop and cabinet
extending above counter
457
c Minimum clearance from left and right edge of cooktop to
nearest vertical combustible surface
05
D Minimum clearance from rear edge of cutout to nearest
combustible surface
51
e Minimum clearance from cook surface to:
- combustible surface centered above the cook surface
- ventilation hood centered above the cook surface
- non-combustible surface centered above the cook surface
172
914
762
f Maximum overall depth of overhead cabinetry
0
Specifications
Electrical
Supply
120 VAC, 60 Hz
Service
15 amp circuit
Gas - Natural
Connection
1/2" NPT Minimum 5/8" dia. flex line
Supply Pressure
Supply Pressure 6" to 9" W.C.
Gas - LP
Connection
1/2" NPT Minimum 5/8" dia. flex line
Supply Pressure
Supply Pressure 11" to 14" W.C.
DATA SHEET
Gas Rangetop, 48", Professional
0 100 200 400
millimetres
INDICATES CABINETRY ---------------------------------------------------
INDICATES CABINETRY / PRODUCT DATUM -------------------------
INDICATES CABINETRY CLEARANCES --------------------------------
INDICATES COOK SURFACE REFERENCE -----------------------------
DATE: 14.6.2021
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Please read the installation manual for detailed information on installing the
product. For full installation instructions & specifications visit fisherpaykel.com
FRONT VIEW
PLAN VIEW
PROFILE VIEW
DATUM :
CABINET SURFACE
BELOW COOKTOP
DATUM :
TOP OF COUNTERTOP
COOK SURFACE REFERENCE
CABINET FACE
FOR FLUSH
CONTROL PANEL
CABINET FACE
FOR PROJECTING
CONTROL PANEL
CABINET FACE FOR
FLUSH CONTROL PANEL
CABINET FACE FOR
PROJECTING CONTROL PANEL
B
F
CLEARANCE:
ADJACENT OVERHEAD
CABINET
DEPTH OF
OVERHEAD CABINET
E
E
E
CLEARANCE:
NON-COMBUSTIBLE
SURFACE
CLEARANCE:
VENTILATION HOOD
CLEARANCE: COMBUSTIBLE SURFACE
CLEARANCE: COMBUSTIBLE SURFACE
CLEARANCE: NON-COMBUSTIBLE SURFACE
CLEARANCE: COMBUSTIBLE SURFACE
CLEARANCE: COMBUSTIBLE SURFACE
D D
D
CLEARANCE: NON-COMBUSTIBLE SURFACE
D
c
CLEARANCE: COMBUSTIBLE SURFACE
c
/