The wall should be capable of supporting a weight of at least five (5) times the
plasma displays. If not, the ceiling must be reinforced. Proper installation procedure
by qualified personnel as outlined in the installation instructions must be adhered to.
Failure to do so could result in serious personal injury.
Description
A. PSD-VHS Stand
B. PSD-UWFB Universal Wall Flat Bracket
C. Mounting Bracket Hardware
D. Flat Mounting Bracket
E. Plasma Display
F. M10 Slotted Hex Bolts
For further information or ordering assistance
contact us at the address shown on the front of
this page.
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Premier Mounts PSD-BWL User manual
-
-
-
Premier UPD-1072 Installation guide
-
-
-
-
-
-