MB3667_Manual_R2_Final.indd 3 12/01/2018 4:18 PM
1) Connect to charger, blue green indicator light
flashes once, then turns to solid green in standby
mode.
2) Place wireless charging enabled smartphone
on charger, LED indicator will switch from green to
blue. Phone is charging.
3) Once smartphone is fully charged, LED
indicator will switch from blue to solid green.
4) Remove smartphone device from charger, LED
indicator will remain green, enter standby mode.
5) FOD function or other error: blue green LED
indicator light will flash when foreign matter is
detected or any other error is noticed.