2. Omron
  3. BCM-500
BCM-500

Omron BCM-500 Quick start guide

  • Hello! I am an AI chatbot trained to assist you with the Omron BCM-500 Quick start guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Body Composition Monitor and Scale with Bluetooth®
Model BCM-500
Quick Start Guide
STEP
1
Download the app.
STEP
3
Pair your smart device.
© 2019 OMRON HEALTHCARE, INC. 5022652-7A
HeartAdvisor
Download and install the “OMRON
HeartAdvisor” app onto your smart device.
STEP
2
Insert 4 “AAA” batteries.
1) Turn on the Bluetooth® on your smart
device.
2) Open the app and follow the instructions.
Note: You can ignore STEP 1 & 3, if you don't
want to pair with a smart device.
STEP
4
Set the measurement
unit, date and time.
1. turn on
2. adjust3. confirm
The date and time will be automatically set
when paired with your smart device. To set
manually, follow the instructions below:
1) Press the button and the “inchlb” blinks.
2) Press the button to adjust the measurement
unit.
3) Press the button to confirm the
measurement unit.
When complete, the year will blink.
4) Repeat the same steps to adjust the year,
month, day, hour, and minute.
5) After all of the settings are entered, the
power automatically turns off.
Intended for measuring and displaying the following body composition parameters.
-- Body Weight -- Body Fat -- Visceral Fat
-- Skeletal Muscle -- Resting Metabolism -- BMI
STEP
6
Take a measurement.
1) Take a measurement when the power of the
monitor is off.
2) When your user ID and measurement results
are displayed, the measurement is complete.
3) Press the button to confirm your user ID.
Note: This monitor regularly recalibrates
automatically when it is not in use.
You can also implement the “0 lb”
correction before taking measurement by
flowing 1) -3) of STEP 5. When the “0.0
lb” is displayed, press the button (2
seconds or longer) to turn off the power.
STEP
5
Set-up your personal
data.
1. turn on
2. adjust3. confirm
1) Press the button and the user ID “1”
blinks.
2) Press the button to select your user ID.
3) Press the button to confirm your user ID.
When complete, the year will blink.
4) Repeat the same steps to set your birth
date, gender, and height.
5) Step onto the monitor to take a measurement
when “0.0 lb” is displayed.
Step off the monitor after the measurement
results are displayed.
6) The personal data set-up is complete.
7) Press the button (2 seconds or longer) to
turn off the power.
Note: You can also set your personal data
on your smart device by following
the instructions from the “OMRON
HeartAdvisor” app.
Correct posture during the
measurement:
Step onto the monitor with your
bare feet.
Place the arches of your feet
onto the center of the monitor.
Do not bend your knees
during measurement.
Position monitor on a hard, level
floor.
STEP
7
Check the measurement
results.
After your measurement is complete, your
results will automatically rotate on the display.
Note: You can also confirm your measurement
results on your smart device by following
the instructions from the “OMRON
HeartAdvisor” app.
STEP
8
Press the button
(2 seconds or longer) to
turn off the power.
The power also turns off if the unit is not used
for 3 minutes.
The Bluetooth
®
word mark and logos are
registered trademarks owned by Bluetooth SIG,
Inc. and any use of such marks by OMRON
HEALTHCARE Co., Ltd. is under license. Other
trademarks and trade names are those of their
respective owners.
Apple and the Apple logo, are trademarks of
Apple Inc., registered in the U.S. and other
countries and regions. App Store and App Store
logo are service marks of Apple Inc. The
Google Play logo is a trademark of Google LLC.
OmronHealthcare.com 1-800-634-4350
/