2. Sharp
  3. PN-HW861
PN-HW861

Sharp PN-HW861, PNHW861 Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Sharp PN-HW861 Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What tool do I need to dismantle the Sharp PN-HW861?
    How do I remove the back cover of the Sharp PN-HW861?
    How do I remove the printed circuit boards (PCBs) from the Sharp PN-HW861?
    Where is the battery located in the Sharp PN-HW861?
    How do I remove the LCD module from the Sharp PN-HW861?
    Where are the electrolyte capacitors located in the Sharp PN-HW861?
    What external electric cables come with the Sharp PN-HW861?
PN-HW861 Dismantle Instruction
1
Dismantle Instruction
LCD MONITOR
MODEL
PN-HW861
701
PN-HW861 Dismantle Instruction
2
Table of contents
1. Scope.................................................................................................................. 3
2. Tools for dismantling ............................................................................................... 3
3. Dismantle Procedure .............................................................................................. 3
4. Back covers .......................................................................................................... 4
5. Printed circuit boards ............................................................................................. 5
6. Battery ................................................................................................................ 5
7. LCD Module .......................................................................................................... 6
8. Capacitors ............................................................................................................ 7
9. Parts List ............................................................................................................. 7
PN-HW861 Dismantle Instruction
3
1. Scope
This document describes dismantling instruction according to Annex VII of Directive 2012/19/EU.
2. Tools for dismantling
Below tools are required to dismantle this product.
- Screw Driver
- Nipper
3. Dismantle Procedure
This product can be dismantled by below steps.
1. Remove Back covers (section 4)
2. Remove Printed circuit boards (section 5)
3. Remove Battery (section 6)
4. Dismantle LCD (section 7)
5. Remove Electrolyte Capacitors (section 8)
PN-HW861 Dismantle Instruction
4
4. Back covers
Back cover can be removed by screw driver.
PN-HW861 Dismantle Instruction
5
5. Printed circuit boards
All PWBs can be removed by screw driver.
Main I/F PWB (1pcs) Power PWB A (1pcs) Power PWB B (1pcs)
LED driver PWB (1pcs) T-CON PWB (1pcs)
6. Battery
This model uses only AAA battery for remote control.
Battery can easily be removed.
PN-HW861 Dismantle Instruction
6
7. LCD Module
- LCD Dismantle procedure
1. Remove Rear cover
2. Remove PWBs and Tray
3. Remove the Cables
LCD
PN-HW861 Dismantle Instruction
7
8. Capacitors
Electrolyte Capacitors which diameter/height is larger than 25mm is installed on Power PWB A and B.
These capacitors can be removed by using nipper to cut the leads.
On Power PWB A On Power PWB B
9. Parts List
Parts described in Annex VII of directive 2012/19/EU are as below.
Parts
Note
LCD
86inch LCD module
Printed Circuit Boards
Main I/F PWB
Power PWB A
Power PWB B
LED driver PWB
T-CON PWB
Battery
AAA battery
Electrolyte capacitors
(height >25mm, diameter >25mm)
On Power PWB A
On Power PWB B
External electric cables
2 kinds of Power Cord
- for EU
- for UK
/