Ticor TR1410 Dimensions Guide
- Category
- Sanitary ware
- Type
- Dimensions Guide
This manual is also suitable for
TR1410
Bradford Series
Undermount Kitchen Corner Sink
Features
• 16 Gauge 304 Stainless Steel Construction
• Satin Brushed Finish
• Non-Porous Corrosion-Resistant Surface
• Equipped with SoundShield™ Noise
Deadening Pads (85% Bottom Basin Coverage)
• Protected with a Non-Toxic Anti-Condensation
Coating
• Limited Lifetime Warranty
Compatible Accessories
TG108 Stainless Steel Custom Fit Basin Rack
CB8 Cutting Board
DT15 Stainless Steel Drying Tray
RSR16.7512 Stainless Steel Rolling Rack
SC1 Deluxe Sink Caddy
TBASK Stainless Steel Basket Strainer
MF1 FuFu Microber Sink Loofah
MIB-U Mounting and Installation Brackets
T1410 Sink Cut-Out Template
Installation Instructions
Codes/Standards
ASME A112.19.3/CSA B45.4
1 of 2
1-(503) 455-8336
Sink specications may change without notice. Please visit www.ticorsinks.com for the most current
information. Updated 04/5/2019
2 of 2
3⁄”
24⁄”
16”
14”
14”
12”
33”
9”
21⁄” 19¼”
10½”
1⁄”
11½”
10¾”
1”
7⁄”
5”
TR1410
R
Technical Information
• Sink Collection: Bradford Series
• Sink Model Number: TR1410
• Corner Style: Tight Radius
• Sink Length (inches): 33
• Sink Width (inches): 21 ¼
• Sink Basin Depth (inches): 9
• Drain Opening (inches): 3.5
• Drain Position: Rear
• Bowl Conguration: Double
• Bowl Ratio: 50/50
• Faucet Holes: Single 1 ½” Hole
• Installation Type: Undermount
• Minimum Sink Base Corner Cabinet Width Required: 33”
(Cabinet May Require Additional Modications at Minimum Size. Consult an Installer for Conrmation)
TR1410
Bradford Series
Undermount Kitchen Corner Sink
1-(503) 455-8336
Sink specications may change without notice. Please visit www.ticorsinks.com for the most current
information. Updated 04/5/2019
-
1
-
2
Ticor TR1410 Dimensions Guide
- Category
- Sanitary ware
- Type
- Dimensions Guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
