Honda 08P08SMG601 Installation guide

JAN. 2006

INSTALLATION

INSTRUCTIONS

2006

FRONT MUD GUARD

Parts List

Tool Required

Before You Begin

Customer Information

• These instructions are for the left front mud guard. The same procedure applies to the right front mud guard.

Left front mud guard Right front mud guard Tapping screws (2)

Screws (4)

• Stubby Phillips screwdriver

08P08-SMG-6000-962 / 2

Installation

1. Turn the steering wheel clockwise fully.

2. Remove the three washer-screws from the left

inner fender.

5420011K

LEFT INNER

FENDER

WASHER-

SCREW (3)

3. Secure the mud guard with two screws and one

tapping screw.

• Secure in the order of 1, 2 and 3.

4. Repeat the procedure on the other side.

5420023K

MUD

GUARD

TAPPING

SCREW

SCREW (2)