ICP CAN-Logger200 Quick Start

Brand: ICP

Model: CAN-Logger200

Type: Quick Start

This manual is also suitable for

CAN-Logger100

ICP DAS USA CAN-Logger200 is a device designed for logging CAN bus data, featuring a microSD card slot for data storage, allowing users to record and analyze CAN bus activity. This compact and rugged device supports both CAN 2.0A and 2.0B protocols, providing flexibility for various applications. With its user-friendly configuration utility, users can easily set up CAN bus parameters, filter messages, and configure real-time clock settings, making it a versatile tool for data logging and analysis tasks.

QuickStartfor

CAN‐Logger series

Dec 2015, Version 1.0.2



Congratulations on purchasing CAN‐Logger series‐the most popular automation

solutionforCANBusdatalogging.ThisQuickStartwillprovideinformationneeded

to get started with CAN‐Logger series. Please also consult the User  Manual for

detailedinformationonthesetupanduseofCAN‐Loggerseries.



CAN‐LoggerseriesQuickStart



Inadditiontothisguide,thepackageincludesthefollowingitems:



CAN‐Logger100or

CAN‐Logger200

SoftwareUtilityCD

USBcable

(CA‐USB15)

ScrewDriver

(1C016)



microSD

(3LMSD‐4000‐1)

M12A‐5P‐IP68connector

(4PIO1K0000003)

Core

(4SIO1K0000014)



y CAN‐LoggerseriesUserManual

CD:\fieldbus_cd\can\can‐logger\manual\

ftp://ftp.icpdas.com/pub/cd/fieldbus_cd/can/can‐logger/manual/

y CAN‐LoggerseriesWebsite

http://www.icpdas.com/root/product/solutions/industrial_communication/fieldbus/can_bu

s/specific_device/can‐logger.html

y ICPDASWebsite

http://www.icpdas.com/



1

‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐

HardwareInstallation



BeforeusingCAN‐Loggerdevice,somethingsmustbedone.



Step1:PrepareoneCAN‐Loggerdevice 



Step2:SettheCANbaudrateofCAN‐Loggerdevicebyusingrotary

switch

CAN‐LoggerseriesQuickStart



SwitchValue Meaning

0 Setbaudrateto10kbps

1 Setbaudrateto20kbps

2 Setbaudrateto50kbps

3 Setbaudrateto100kbps

4 Setbaudrateto125kbps

5 Setbaudrateto250kbps

6 Setbaudrateto500kbps

7 Setbaudrateto800kbps

8 Setbaudrateto1Mbps

9

Setbaudratetouser‐definedbaudratewhichisconfiguredby

CAN‐Loggerutility.

A~E N/A

F

SetCAN‐Loggerdeviceintofirmwareupdatemode.Thefirmware

updatetoolisneeded.



Step3:Determineiftheterminatorresistorisneededornot



Checktheapplicationstructure,anddetermineiftheterminatorresistorisneededornot.You

canfinditatthepositionasfollows.



CAN‐LoggerseriesQuickStart







Generally,ifyourapplicationisasfollows,werecommendyoutoenabletheterminatorresistor.



Ifyourapplicationislikethestructureasfollows,theterminatorresistorisnotneeded.



Step4:ConnecttheCANport,powerline,framegroundorUSBportof

theCAN‐Loggerdevice.



Thepinassignmentandwireconnectionareasfollows.Whenfinished,runyourapplicationwith

theCAN‐Loggerdevice.



CAN‐LoggerseriesQuickStart



Pin.No. Name Meaning

1 F.G. FrameGround.

2 +Vs VoltageSourceInput.+10VDC~ +30VDC.

3 GND PowerGround.

4 CAN_H CAN_High,signallineofCANport.

5 CAN_L CAN_Low,signallineofCANport.



 



2

‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐



Utilitytool



Whenuserswanttouseuser‐definedCANbaudrate,CANmessag efilteranddiagnosticfunctiononthe

CAN‐Loggerseries,theCAN‐LoggerUtilitytoolmaybeneeded.



Step1:InstalltheCAN‐LoggerUtility



Thesoftwareislocatedat:

Fieldbus_CD:\CAN\Converter\CAN‐Logger\Software\Utility

http://www.icpdas.com/products/Remote_IO/can_bus/can‐logger.htm

CAN‐LoggerseriesQuickStart



Step2:SettinguptheCAN‐Loggermodule



1. ConnectthePCavailableUSBportwiththeUSBportoftheCAN‐Loggerdevice.Userscan

findthecommunicationcable(CA‐USB15)intheproductbox.



2. ExecutetheCAN‐LoggerUtilitytool.



Step3:ConfiguretheCAN‐Loggerseries



WhenexecutingtheUtility,thetoolwilltrytoscanallthenecessaryCAN‐Loggermodulesand

listallscannedmoduleinformationontheleft‐bottomoftheUtilitymainframe.Usercanpress

the“Refresh”buttomtore‐scanthenewerinsertedCAN‐Loggermodule.

CAN‐LoggerseriesQuickStart



ViatheCAN‐LoggerUtility, usercansettheCANportoperationmodeandfilterparameterof

themodule.Pleaseref ertothefollowingstepstoconfiguretheCAN‐Loggerseries.



1. SelectthenecessaryCAN‐Loggermoduleandthenpressthe“Configurate”buttom.

Thenthe“DeviceConfiguration”windowwillbepoppedup.

CAN‐Logger seriesQuickStart 

2. Onthe“DeviceConfiguration”windows,usercansettheCANBusparameter,andother

prarameters.Thedetailfunctionsoftheseparametersarelistbelow.

[CANBusParameters]

“PortEnable” : Enable/DisabletheCAN1/CAN2port.



“SilentMode”: SettheCANportintosilentmode.WhensettingtheCANportintosilent

mode,theCANportwilljustreceiveCANmessages,noCANAckcommand

besenttotheCANBus.



“BaudRate”:CANBusbaudrateinused.Viasettingtherataryswitchfrom‘0’~‘8’,usercan

changetheCANBusbaudratefrom‘10kbps’to‘1Mbps’.Ifyouwanttouse

user‐definedCANbaudrate,usercansettherataryswitchto‘9’,andthensetthe

“DefinedBaudRate”parametertotheCANbaudratethatyouneed.



“DefinedBaudRate”: CANBusbaudrateusedforuser‐defined.AftersettheCANrotaryswitch

to‘9’,youcansetthisparametertothebaudrateyouneed.



“SamplePoint”: SamplepointofCANbaudratebittiming.



“CANIDFilter”: CANmessageIDfilter.

[Mode]: ModeofCANID,canbesetto2.0A(11‐bitCANID)and2.0B(29‐bitCANID).

[Mask]: MaskCANIDbits.Beusewith[Arbitration]parameter.Bitvalueof0meandoes

notcarethebitofcorresponding“ArbitrationCANID”andbitvalueof1means

thisbitneedbematchedwiththecorrespondingbitof“ArbitrationCANID”.

[Arbitration]: ArbitrationCANIDbit.TheCANIDthatyouwanttousefortheCANIDfilter.



[Example]

1. AllCANIDpassed.

[Mode]=“2.0A”

[Mask]=“000”

[Arbitration]=“000”



2. Filterallmessagesex ceptIDof0x123.

[Mode]=“2.0A”

[Mask]=“7FF”

[Arbitration]=“123”



3. Filterallmessagesex ceptIDfrom0x100~0x10F.

[Mode]=“2.0A”

[Mask]=“7F0”

[Arbitration]=“100”



[OtherParameters]

“DeviceReal‐timeclock”: RTCtimeoftheCAN‐Loggerdevice.Thisparameterisusedfor

CAN‐LoggerdevicetologthereceivedCANmessagesintoSDcard.

“RTCBatteryVoltage”: CrrentbatteryvoltagethatRTCused.Thebatteryvaltagemustbe

thevaluebetween2.2V

to3.6V



Step4:Transmit,receiveCANmessagesandcheckCANBusstate



ByusingtheCAN‐LoggerUtiltiytool,usercantransmit,receiveCANmessagesandchecktheCAN

BusstateoftheCAN‐Loggerdevices.

1. ConnectwiththeselectedCAN‐Loggerdevice.



2. TransmitCANmessages,checkreceivedCANmessagesandCANBusstate.



CAN‐LoggerseriesQuickStart



3



‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐



Core’sapplicationandwiring



Core(Ferrite)isusefultoreduce

ElectroMagnetic

Interference(EMI)andanti‐noise,itmainlyusesfor

communicationinterfacelikeCANBusandDCpowersupplyline.



ThebelowphotosarethewiringofthecoreonCANBusside.

1 2



ICP CAN-Logger200 Quick Start

Brand: ICP

Model: CAN-Logger200

Type: Quick Start

This manual is also suitable for

CAN-Logger100

Download PDF

report

ICP CAN-Logger200 Quick Start

This manual is also suitable for

ICP CAN-Logger200 Quick Start

Related papers

Other documents