Philips 109S User manual

Category
TVs & monitors
Type
User manual
Philips 109S Electronic User's Manual
file:///C|/rita wu/gs3LF/ENGLISH/109S/Index.htm [10/12/2000 1:57:27 AM]
Safety and Troubleshooting Information
Safety Precautions and MaintenanceTroubleshootingRegulatory InformationOther
Related Information
Safety precautions and maintenance
WARNING: Use of controls, adjustments, or procedures other than those
specified in this documentation may result in exposure to shock, electrical
hazards, and/or mechanical hazards.
Read and follow these instructions when connecting and using your computer monitor:
Disconnect the monitor from the power supply if the monitor is not to be used for an extended period
of time.
Do not attempt to remove the back cover, as you will be exposed to a shock hazard. The back cover
should only be removed by qualified service personnel.
Do not place objects on top of the monitor cabinet, objects could fall into vents or cover them and
prevent proper cooling of the monitor's electronic devices.
To avoid the risk of shock or permanent damage to the set, do not expose the monitor to rain or
excessive moisture.
Do not use alcohol or ammonia-based liquid to clean the monitor. If necessary, clean with a slightly
damp cloth. Disconnect the monitor from the power supply before cleaning.
When positioning the monitor, make sure the power plug and outlet are easily accessible.
Consult a service technician if the monitor does not operate normally when operating instructions of this
manual are followed.
RETURN TO TOP OF THE PAGE
Safety & Troubleshooting
file:///C|/rita wu/gs3LF/ENGLISH/109S/safety/safety.htm [10/12/2000 2:00:18 AM]
About This Electronic User's Manual
About This GuideOther Documents You May NeedNotational Descriptions
About This Guide
This electronic user's guide is intended for anyone who uses the Philips 109S Color Monitor. It describes the
monitor's features, setup, operation and all other information, which is the same exact information described
in our printed version.
The sections are as follows:
Safety and Troubleshooting Information provides tips and solutions for common problems, and other
related information you may need.
About This Electronic User's Manual gives overview of what information are included as well as
notation icon descriptions and other documentation you can refer to.
Product Information gives an overview of the monitor's features and as well as the technical
specifications for this monitor.
Installing Your Monitor describes the initial setup process and gives an overview of how to use the
monitor.
On Screen Display provides information on adjusting the settings on your monitor.
Customer Care and Warranty is a list of worldwide Philips consumer information centers along with
the help desk phone numbers and information on the applicable warranty of your product..
Glossary provides more information for technical terms.
Download Option allows you to consumer keep a copy of the entire manual in your hard drive.
RETURN TO TOP OF THE PAGE
Other Documents You May Need
In addition to this Electronic User's Guide, you may need to refer to the following documentation:
Philips Color Monitor Quick Start Guide which summarizes the steps for setting up the monitor. This is
included with this product.
RETURN TO TOP OF THE PAGE
Notational Descriptions
The following subsections describe notational conventions used in this document.
About This Electronic User's Manual
file:///C|/rita wu/gs3LF/ENGLISH/109S/about/about.htm (1 of 2) [10/12/2000 2:00:19 AM]
Notes, Cautions, and Warnings
Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type.
These blocks are notes, cautions, and warnings, and they are used as follows:
NOTE: This icon indicates important information and tips that help you make better
use of your computer system.
CAUTION: This icon indicates information that tells you how to avoid either potential
damage to hardware or loss of data.
WARNING: This icon indicates the potential for bodily harm and tells you how to
avoid the problem.
SMART HELP: This icon indicates helpful information when adjusting the On Screen
Display of your monitor.
Some warnings may appear in alternate formats and may be unaccompanied by an icon. In such cases, the
specific presentation of the warning is mandated by regulatory authority.
RETURN TO TOP OF THE PAGE
©1999 Koninklijke Philips Electronics N.V.
All rights reserved. Reproduction, copying, usage, modifying, hiring, renting, public performance, transmission and/or broadcasting in whole or in
part is prohibited without written consent of Philips Electronics N.V.
About This Electronic User's Manual
file:///C|/rita wu/gs3LF/ENGLISH/109S/about/about.htm (2 of 2) [10/12/2000 2:00:19 AM]
Product Information
Product FeaturesLightFrame™ for WindowsTechnical SpecificationsAutomatic Power
SavingPhysical SpecificationPin AssignmentProduct Views
Product Features
109S20:
19-inch (18.0" VIS) color monitor with excellent front of screen performance for use with MACs and
PCs
Autoscan covers horizontal frequencies up to 92 kHz offering a maximum resolution of 1920 x 1440
with flicker free display of 1280 x 1024 up to 86 Hz
Flat square High Contrast CRT with 0.27 mm pitch (0.23 hdp)LightFrame™ for brightest and sharpest display of movie and photo windowsXSD-Xtra Space Design for large screen display in a small footprint: World's shortest 19-inch
conventional monitor with maximum depth of only 440 mm/17.3"
Multimedia Base and USB Hub option
FCC, CE (in selected countries only) and ISO9241, ISO14001 certified
RETURN TO TOP OF THE PAGE
LightFrame™ for Windows
Introduction
Philips LightFrame™ feature enriches the experience of pictures and video on a Philips CRT monitor. This
highlighting is done by boosting the brightness and sharpness on a selected region of the monitor screen.
Since high brightness and sharpness are not preferred for most standard Windows applications, this special
feature will only be active in certain circumstances. So that you can control these circumstances, a special
program and icons will be installed in your Windows operating systems.
Notes
Philips LightFrame™ will only work with monitors that have been built to use this software. Earlier Philips
monitors or other manufacturers' monitors will not work with this special software. It is recommended that
you install this software only on a Philips monitor designed to use it. These monitors can be identified by the
LightFrame™ logo on the front of the monitor.
This software is not designed for use with LCD flat screen monitors.
LightFrame™ will work with true Windows-based programs and DOS-based programs that operate in a
Window 's environment. It will not work with DOS-based programs operating only in a DOS environment.
Definitions
The following list contains definitions for frequently used words.
Highlighted window: The selected window on which LightFrame™ is active.
Highlighted area: The selected rectangle (area) on which LightFrame™ is active.
109S Product Information
file:///C|/rita wu/gs3LF/ENGLISH/109S/product/product.htm (1 of 7) [10/12/2000 2:00:19 AM]
Compatibility
This version of LightFrame™ is compatible with
Windows 95
Windows 98
Windows NT
Windows 2000 Professional Edition.
Language Selection
While English is the default language of LightFrame™, the User Interface can be set up to operate in Dutch,
French, German, Italian, Portuguese, or Spanish.
Installation
To install LightFrame™, place the CD in the CD-ROM drive.1. Next, when the menu of items on the CD appears on your screen, click on 'Install LightFrame™'.2. Now, follow the on-screen prompts to properly install the program. The software checks to see if you
have a compatible monitor. You must say yes to the license agreement for the software to install.
3.
After installation, LightFrame™ automatically loads and the icon appears in the taskbar.4.
Notes
LightFrame™ is installed in the Start menu, under Programs. Unless otherwise selected during installation,
LightFrame™ is installed in "C:\Program Files\Philips\LightFrame. " A shortcut is installed in the StartUp
folder and on the desktop. (If needed, LightFrame™ can be operated manually from the StartUp folder.)
If LightFrame™ detects that your monitor is not LightFrame™ compatible, an message appears on the
monitor screen. See Error Message number 1 under the heading Error Messages. If you see this message,
you can select to abort or continue the installation. However, if you continue the installation, LightFrame™
will probably not work on the monitor.
Uninstall
Should you need to remove the LightFrame™ software, please follow these steps.
First, click on the Start Menu.1. Next, highlight Settings.2. Then, click on Control Panel.3. Now, click on Add/Remove Programs 4. Finally, select LightFrame from the list and then click on the Add/Remove button. 5.
Operating LightFrame™
After installation, LightFrame™ starts up automatically whenever the computer is started. At system start
up, LightFrame™ checks the selected resolution of the monitor and if the monitor is LightFrame™ capable.
Icon and Colors
An icon of a monitor represents LightFrame™ on your desktop. This icon appears as a shortcut on the
Windows desktop. LightFrame™ has three (3) modes of operation: Active, Inactive, and Suspended. The
same icon with a different color in its center represents each mode.
Active = LightFrame™ icon has bright green center.
Inactive = The icon has a gray center.
109S Product Information
file:///C|/rita wu/gs3LF/ENGLISH/109S/product/product.htm (2 of 7) [10/12/2000 2:00:19 AM]
Suspended = The icon has a yellow center with a red cross.
Notes
An active window must be 100% visible, i.e. it must be on top of all other windows or areas. If any part of
another window or area overlaps a highlighted window, LightFrame™ automatically suspends operation.
That means the icon goes from a green center to a yellow on with a red cross and the feature ceases. Once
that window or area is removed and the original highlighted window is on top again, LightFrame™
automatically re-engages and the icon regains its bright green center.
An active window must also be 100% on the monitor 's viewing area. If part of a highlighted window moves
off the monitor 's viewing area, LightFrame™ automatically goes into the Suspended mode. If part of a
window is off the viewing area, you will not be able to use LightFrame™ on that window.
Only one window or area at a time can be highlighted.
How To Activate LightFrame™
Click on the LightFrame™ icon in the systemtray (the area to the far right in the taskbar). . The icon
will turn from gray to a green center.
1.
Guide the mouse to the window you want displayed. As you move the mouse, the cursor changes to
a small arrow with a light bulb.
2.
3a) Click on the window you want to have highlighted. The brightness and sharpness are
automatically adjusted.
3b) If you want to highlight only an area of a window, click on the left mouse button and drag the
cursor over the area to be highlighted while holding the mouse button. A rectangle forms around the
area. When the area is encompassed by the rectangle, release the mouse button and the area
becomes highlighted.
3.
How to Deactivate LightFrame™
To deactivate, click on the LightFrame™ icon in the System Tray of the Taskbar. The light in the middle of
the icon turns gray and LightFrame™ is deactivated.
Note
If a highlighted window is closed before LightFrame™ is deactivated, LightFrame™ is automatically
deactivated.
Right-Click Features
On the LightFrame™ icon in the taskbar, click the right-side mouse button to bring up a menu from which
you can select:
About...which tells you something about LightFrame™
Help which takes you to the Help screen where you can find additional information
Exit which exits the LightFrame™ Program.
If you select exit and the color in the center of the icon is green, it will turn gray and LightFrame™ is
deactivated. If you select exit an Exit message appears asking you if are sure you want to exit. Select "Yes "
to exit or "No " to abort the exit. If you select Yes, you can always restart LightFrame™ by clicking on the
desktop shortcut icon.
LightFrame™ is Suspended When . . .
109S Product Information
file:///C|/rita wu/gs3LF/ENGLISH/109S/product/product.htm (3 of 7) [10/12/2000 2:00:19 AM]
Screensaver, Sleep mode, Deep Sleep (Power Off) mode is Activated
LightFrame™ goes into the Suspended mode as soon as a screensaver becomes active on your computer.
This is true even though the monitor icon may still have a green center. LightFrameä>> becomes active
again as soon as the screen is reawakened and the screensaver quits.
The same is true when the computer goes into Sleep mode or Deep Sleep (Power Off) mode.LightFrame™
goes into Suspended mode and reawakens when the monitor is reawakened.
Screen or Area is Minimized
LightFrame™ suspends when a highlighted window is minimized. LightFrame™ reactivates when the
highlighted window is again maximized or restored to its previous size.
Another Window or Area Overlaps Highlighted Window or Area
LightFrame™ suspends if a window that is not highlighted overlaps a highlighted window. LightFrame™
reactivates once the highlighted window is again on top.
Miscellaneous
Monitor Turned Off
If the monitor is "hard powered off " while a window or area is highlighted and then hard powered on again,
LightFrame™ is no longer active. The icon may still show the feature as still active. In this case, you have to
exit LightFrame™ and restart it via the icon on the desktop or the Start menu.
If the Monitor is Detached and Another Monitor is Attached
If the monitor is detached from the computer while a highlighted window or area is displayed and then
another monitor is attached, the system will have to be rebooted so that Philips ' LightFrame™ can detect
the monitor 's LightFrame™ capabilities and store the setup information about the new monitor. If the
monitor is not LightFrame™ capable, an Error message appears. See Error Message 2 under the heading
Error Messages. You can abort or continue the set up. However, if you continue, LightFrame™ may not
work with the monitor.
Error Messages
You may see this message when you install LightFrame™.
Error Message 1 dialog box here
LightFrame™ cannot detect a monitor which supports this feature. You can still proceed with the software
installation but LightFrame™ might not run on your system.
You may see this message when you try to switch monitors.
Error Message 2 dialog box here
LightFrame™ cannot detect a monitor which supports this feature. You can still start the software but
LightFrame™ may not work.
RETURN TO TOP OF THE PAGE
109S Product Information
file:///C|/rita wu/gs3LF/ENGLISH/109S/product/product.htm (4 of 7) [10/12/2000 2:00:19 AM]
Technical Specifications*
CRT
• Size and deflection 19 inch / 46 cm ; 90° deflection angle
• Dot pitch 0.27 mm
• Horizontal pitch 0.23 mm
• Tube type Shadow mask, flat square, high contrast, anti-glare, anti-static,
anti reflection, light transmission 46%
• Phosphor P22
• Recommended display area 14.0" x 10.4" / 355 x 265 mm
• Maximum display area 14.4" x 10.8" / 365 x 274 mm
SCANNING
• Horizontal scanning 30 - 92 KHz
• Vertical scanning 50 - 160 Hz
VIDEO
• Video dot rate 234 MHz
• Input impedance
- Video 75 ohm
- Sync 2.2 kOhm
• Input signal levels 0.7 Vpp
• Sync input signal Separate sync
Composite sync
• Sync polarities Positive and negative
WHITE COLOR TEMPERATURE
Chromaticity CIE coordinates:
• at 9300 K degrees x = 0.283 / y = 0.297
• at 6500 K degrees x = 0.313 / y = 0.329
* These information are subject to change without notice.
RETURN TO TOP OF THE PAGE
Automatic Power Saving
109S Product Information
file:///C|/rita wu/gs3LF/ENGLISH/109S/product/product.htm (5 of 7) [10/12/2000 2:00:19 AM]
If you have VESA's DPMS compliance display card or software installed in your PC, the monitor can
automatically reduce its power consumption when not in use. And if an input from a keyboard, mouse or
other input device is detected, the monitor will automatically "wake up". The following table shows the power
consumption and signaling of this automatic power saving features:
Power Management Definition
VESA's Mode Video H-sync V-sync Power Used Power
Saving (%) LED color
ON Active Yes Yes Typical 89W 0 % Green
Stand-by Blanked No Yes < 7W 93% Yellow
Suspend Blanked Yes No < 7W 93% Yellow
OFF Blanked No No < 3W 97% Amber
This monitor is ENERGY STAR® compliant. As an ENERGY STAR® Partner, PHILIPS has
determined that this product meets the ENERGY STAR® guidelines for energy efficiency.
RETURN TO TOP OF THE PAGE
Physical Specifications
• Dimensions 17.3" x 17.6" x 17.3" / 440 x 447 x 440 mm (including base)
17.3" x 15.7" x 17.3" / 440 x 399 x 440 mm (excluding base)
• Weight 19.7 kg
• Power supply 90 - 264 VAC, 50/60Hz
• Temperature (operating) 0° to 40°C / 32° to 104°F
• Temperature (storage) -25° to +65°C / -13° to +149°F
• Relative humidity 5% to 95%
* Resolution 1280 x 1024, standard size, contrast max., brightness 50%, 9300°, full white pattern.
* These information are subject to change without notice.
RETURN TO TOP OF THE PAGE
Pin Assignment
The 15-pin D-sub connector (male) of the signal cable (IBM systems):
109S Product Information
file:///C|/rita wu/gs3LF/ENGLISH/109S/product/product.htm (6 of 7) [10/12/2000 2:00:19 AM]
Pin
No. Assignment
Pin
No. Assignment
1 Red video input 9 No pin
2 Green video input 10 Logic ground
3 Blue video input 11 Identical output - connected
to pin 10
4Identical output - connected
to pin 10 12 Serial data line (SDA)
5 Ground 13 H. Sync / H+V
6 Red video ground 14 V. Sync (VCLK for DDC)
7 Green video ground 15 Data clock line (SCL)
8 Blue video ground
RETURN TO TOP OF THE PAGE
Views
Follow the links to see various views of the monitor and its components.
Front View
Rear View
RETURN TO TOP OF THE PAGE
109S Product Information
file:///C|/rita wu/gs3LF/ENGLISH/109S/product/product.htm (7 of 7) [10/12/2000 2:00:19 AM]
Installing your Monitor
Front ViewRear View6G3B11 Multimedia Base (option)PCUH411 USB Hub (option)
Front View
Power button switches your monitor on.
OK button which when pressed will take you to the OSD controls
Contrast hotkey. When the UP arrow is pressed, the adjustment controls
for the CONTRAST will show up.
UP and DOWN buttons are used when adjusting the OSD of your monitor
Installing your Monitor
file:///C|/rita wu/gs3LF/ENGLISH/109S/install/install.htm (1 of 3) [10/12/2000 2:00:21 AM]
Brightness hotkey. When both the LEFT and RIGHT arrows are pressed
at the same time, then the adjustment controls for BRIGHTNESS will
show up.
LEFT and RIGHT buttons, like the UP and DOWN buttons, are also used
in adjusting the OSD of your monitor.
RETURN TO TOP OF THE PAGE
Rear View
Installing your Monitor
file:///C|/rita wu/gs3LF/ENGLISH/109S/install/install.htm (2 of 3) [10/12/2000 2:00:21 AM]
Power in - attach power cable here.1.
Video In - this is a cable which is already attached to your monitor. Connect the other
end of the cable to your PC.
2.
RETURN TO TOP OF THE PAGE
Installing your Monitor
file:///C|/rita wu/gs3LF/ENGLISH/109S/install/install.htm (3 of 3) [10/12/2000 2:00:21 AM]
On-Screen Display
Description of the On-Screen DisplayThe OSD TreeThe OSD Controls
Description of the On Screen Display
What is the On-Screen Display?
This is a feature in all Philips monitors which allows an end-user to adjust screen performance of monitors
directly though an on-screen instruction window. The user interface provides user-friendliness and
ease-of-use when operating the monitor.
Basic and simple instruction on the control keys.
On the front controls of your monitor, once you press the button, the On Screen Display (OSD) Main
Controls window will pop up and you can now start making adjustments to your monitor's various features.
Use the or the keys to make your adjustments within.
On-Screen Display
file:///C|/rita wu/gs3LF/ENGLISH/109S/osd/osddesc.htm (1 of 4) [10/12/2000 2:00:22 AM]
RETURN TO TOP OF THE PAGE
The OSD Tree
Below is an overall view of the structure of the On-Screen Display. You can use this as reference when you
want to later on work your way around the different adjustments.
On-Screen Display
file:///C|/rita wu/gs3LF/ENGLISH/109S/osd/osddesc.htm (2 of 4) [10/12/2000 2:00:22 AM]
On-Screen Display
file:///C|/rita wu/gs3LF/ENGLISH/109S/osd/osddesc.htm (3 of 4) [10/12/2000 2:00:22 AM]
RETURN TO TOP OF THE PAGE
On-Screen Display
file:///C|/rita wu/gs3LF/ENGLISH/109S/osd/osddesc.htm (4 of 4) [10/12/2000 2:00:22 AM]
Customer Care & Warranty
PLEASE SELECT YOUR COUNTRY/AREA TO READ THE WARRANTY COVERED:
WESTERN EUROPE: Austria • Belgium • Cyprus • Denmark • France • Germany • Greece •
Finland • Ireland • Italy • Luxembourg • the Netherlands • Norway • Portugal • Sweden •
Switzerland • Spain • United Kingdom
EASTERN EUROPE: Czech Republic • Hungary • Poland • Russia • Turkey • Bulgaria
LATIN AMERICA: Antilles • Argentina • Brazil • Chile • Colombia • Mexico • Paraguay • Peru
• Uruguay • Venezuela
NORTH AMERICA: Canada • USA
PACIFIC: Australia • New Zealand
ASIA: Bangladesh • China • Hong Kong • India • Indonesia • Japan • Korea • Malaysia •
Pakistan • Philippines • Singapore • Taiwan • Thailand
AFRICA: Morocco • South Africa
MIDDLE EAST: Dubai • Egypt
Customer Care and Warranty
file:///C|/rita wu/gs3LF/ENGLISH/warranty/warranty.htm [10/12/2000 2:00:22 AM]
Glossary
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
A
Autoscan
A microprocessor-based feature of Philips Brilliance monitors is able to detect automatically horizontal and
vertical frequencies of input signals with those of the installed video card. An autoscan monitor can thus
operate with a wide range of video cards. MultiSync, a registered trademark of NEC, provides a similar
function.
RETURN TO TOP OF THE PAGE
B
Balanced pincushion
See Geometric distortion
BNC connection
A special construction of connector used in some monitors with higher horizontal scanning frequency. The
BNC connection can provide the optimum shielding and matching characteristic impedance of video signal
path to ensure the best video performance.
RETURN TO TOP OF THE PAGE
Glossary
file:///C|/rita wu/gs3LF/ENGLISH/109S/glossary/glossary.htm (1 of 18) [10/12/2000 2:00:24 AM]
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88

Philips 109S User manual

Category
TVs & monitors
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI