Turncraft 08358 Dimensions Guide

Brand
Turncraft
Model
08358
Type
Dimensions Guide
Standard Sizes:
* Split columns ARE NOT LOAD BEARING.
** Load capacities are reduced when loads are not centered.
Cap and base sets include neck moulding (customer installed) and installation hardware. These cap & base sets
are not for use with other Poly-Classic columns due to shaft size differences. The pultruded mouldings are factory
mitered, and assembled into one unit for easy installation. TimeSaver 8" sets are one-piece ABS or polystyrene.
Tuscan Cap and Base with Neck Moulding (standard)
8" sets are TimeSaver ABS; other sizes are Pultruded Fiberglass.
Shaft Width Set Item #
Pallet
Quantity
Est. Weight Cap Item #
Base
Item #
Necking
Item #
8" 73816 96 5 73843 73845 73847
10" 73817 63 6 73844 73846 73848
DuraGlass Column Specs
Plinth
Height Neck Round Abacus Height
A B C D B-D E F‡ G H I G-H
8" 7 1/8 10 9/16 1 3/4 1 5/8 1/2 3 7/8 1 1/2 1 3/4 1 5/16 1 3/8 10 11/16 2 11/16
10" 9 1/8 12 9/16 1 3/4 1 5/8 1/2 3 7/8 1 1/2 1 3/4 1 5/16 1 3/8 12 11/16 2 11/16
† Net size is approximately 3/8" less than nominal.
‡ CUSTOMER APPLIES NECK MOULDING. They can adjust the F dimension (necking position) as desired.
16
16
Tuscan Cap
Tuscan Base
Nominal Outside
Width†
Inside Width
(maximum)
Torus
10" x 12'0 73827 53 6,000
10" x 10'0 73826 44 6,000
10" x 9'0 73825 40 6,000
10" x 8'0 73824 35 6,000 16
16
10" x 6'0 73823 27 6,000 16
8" x 12'0 73822 42 5,000 25
8" x 10'0 73821 35 5,000
8" x 9'0 73820 32 5,000 25
25
8" x 8'0 73819 28 5,000
8" x 6'0 73818 21 5,000 25
25
Nominal
Width x
Shaft Item
Number
Est. Shipping
Weight
Load
Capacity **
Pcs. Per
Pallet
Designed for light weight and easy installation, Turncraft pultruded columns have all the benefits you desire: decay resistance, load bearing,
durable, and a limited lifetime warranty. This column can be easily trimmed on the jobsite. Custom lengths can be special ordered - contact our
sales department for more information. Columns that are split for reassembly are split on the diagonal to provide larger gluing surfaces*.
Standard cap, base and necking for 8" columns are TimeSaver™ ABS. Standard cap, base and necking for 10" sizes are pultruded fiberglass.
DuraGlass™ Pultruded
Non-Tapered Square Poly-Classic Columns
Pricing and specifications subject to change without notice.
  • Page 1 1

Turncraft 08358 Dimensions Guide

Brand
Turncraft
Model
08358
Type
Dimensions Guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents