FLIR IP N16D44K84 User guide

Brand: FLIR

Model: IP N16D44K84

Type: User guide

This manual is also suitable for

Information in this document is subject to change without notice. As our

products are subject to continuous improvement, FLIR Systems, Inc. and

our subsidiaries reserve the right to modify product design, speciﬁcations

and prices, without notice and without incurring any obligation. E&OE ©

Package Contents:

Connecting Your System

4K Network Video Surveillance Recorder

DNR700 Series

Quick Connection Guide

IP Cameras* Monitor* Router* Mouse

HDMI

Ethernet Extension Cable*

VGA*

NOTE: It may take up to

1 minute for cameras to

start up and transmit video

to your NVR.

Power

Recommended:

Connect cameras to NVR

Connect cameras to a PoE switch*

or router* on your network. See

“Adding cameras from the LAN” on

reverse for more details.

DNR700_SERIES_QCG_EN_R2

3 4 5

This system features automatic ﬁrmware

upgrades for enhanced functionality. It is

required to upgrade your system to the latest

ﬁrmware version.

If a ﬁrmware upgrade is available:

1. After startup, a notiﬁcation will appear

asking you to upgrade the ﬁrmware. Click OK to

upgrade.

2. The system will download and install the

ﬁrmware upgrade. Wait for the ﬁrmware update

to complete. The system may restart during the

ﬁrmware upgrade process.

DO NOT power off or disconnect the power

cable during ﬁrmware installation.

* Not included / sold separately.

16/32 channel conﬁguration shown. 8 channel will have the respective number of video inputs.

For camera compatibility information, visit ﬂir.com/security/support

NVR

Quick Start Guides

USB Mouse

Power Cable

Remote Control

Ethernet Cable

HDMI Cable

For PoE switch

installations only

Click on the Downloads tab

Visit ﬂir.com/security/support

Search for the model number

of your product

Click on your product in the

search results

Need Help?

Visit us online for up-to-date software and complete

instruction manuals

6: ON

For the best video output

this NVR can provide,

you must use it with a

monitor that supports 4K

resolution.

1. LEFT-CLICK:

• During split-screen display mode:

Click an individual channel to view it

in full-screen. Click again to return to

the split-screen display mode.

• While navigating menus: Click to

open a menu option.

2. RIGHT-CLICK:

• During live view: Right-click anywhere

on the screen to open the Quick

Menu.

• Within system menus: Right-click to

exit menus.

Using the Mouse

1 2

Playback and Search

1. From live view, right-click and then click Search.

2. Log in using the system user name (default: admin) and

password (default: 000000).

3. Use the calendar on the right to select the date to

playback.

4. Use the drop-down menus to select the channels you

would like to playback. Click the display options

(

) to playback multiple channels simultaneously.

5. Click inside the video bar to select the playback time.

Playback starts immediately at the selected time.

Select the day

to playback.

Select channels

to playback.

Adding Cameras from the LAN

NOTE: Please visit ﬂir.com/security/support for a list of compatible IP cameras.

Follow the steps below to add cameras that are not directly connected to the Power

over Ethernet (PoE) ports on the back of the NVR.

Setting the Date and Time

1. In live view, right-click and click Main Menu.

2. Log in using the system user name (default: admin) and password (default:

000000).

Enter the current time and

select your time zone, and

click OK.

It is important to set the correct time to ensure accurate time stamps on

video recordings.

Check DST to enable auto

Daylight Savings Time

updates.

(Optional) Check NTP to sync

your system with an Internet

time server. Click Manual

Update to instantly update

the time.

NOTE: A constant Internet

connection is required to use

NTP.

Using the Quick Menu

Right-click to open the Quick Menu.

Select camera/live display view

Control PTZ cameras (not included)

Adjust camera color and image settings

View system information

Start/stop sequence mode

Search and playback recordings

Open manual recording controls

Open Main Menu

Control auto focus cameras (not included)

Add IP cameras over the LAN

Disable current audible warning

Control Fish Eye cameras (not included)

Click and

select Setting

DNR700_SERIES_QCG_EN_R2

4K Network Video Surveillance Recorder

DNR700 Series

Quick Connection Guide

1. Connect the camera to a router or switch on the same network as the NVR.

2. Right-click and select Device Search. Log in using the admin account (default User

Name: admin; default Password: 000000).

3. Click Device Search.

4. Check the camera(s) you would like to add.

5. Click Add. The Status indicator turns

green to show the camera is successfully

connected.

NOTE: If the Status indicator is red, click

Update the camera user name, password,

ports, and manufacturer as needed.

6. Click OK to save changes.

4. Click General and select the Date&Time tab.

5. Click Apply to save changes.

Click inside the

bar to select a

playback time.

FLIR IP N16D44K84 User guide

Brand: FLIR

Model: IP N16D44K84

Type: User guide

This manual is also suitable for

Download PDF

report

FLIR IP N16D44K84 User guide

This manual is also suitable for

FLIR IP N16D44K84 User guide

Related papers

Other documents