MINOURA Connecting Bar for DS-2100 Instructions Manual

Type
Instructions Manual
Allows connecting two DS-2100 stands side to side.
It's much more stable than just placing stands on the floor.
1
2
3
4
Attach the U-shaped Bracket to each Stepbar.
Put the Bar through every rectangle hole on the Brackets.
Put the Plate Nut to the rectangle holes. Place the Plate
Nut onto the Bar.
Screw the M6x8 Bolt to the thread hole on the Plate Nut
to hold the Bar.
4 944924 422592
  • Page 1 1

MINOURA Connecting Bar for DS-2100 Instructions Manual

Type
Instructions Manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages