Combi 8050 User manual

Hello! I am an AI chatbot trained to assist you with the Combi 8050 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!

1. Locate your rear tether strap attached to

the base.

2. Uncover the adjuster on your tether strap

and pull the loose end of the strap out

from the adjuster.

3. Identify a suitable anchoring point under

the front seat of your vehicle.

4. Route the strap around the anchor point

and through the adjuster.

5. Tighten your rear tether by pulling the

loose end of the strap.

6. Cover the adjuster with the pad provided.

COVER PAD

ADJUSTER

REAR TETHER STRAP INSTALLATION